What is the reason why the humidifier is not energized, and the humidifier suddenly does not work? W

Humidifier. It is a commonly used household electrical appliance, which is not expensive, but after using it for a period of time, the humidifier will not be powered on, and the humidifier will not fog up, and many users do not know whether the humidifier is completely damaged at these times. Should you throw it away, let's introduce what happens when the humidifier doesn't power on and how to repair the humidifier by yourself without fogging, and users who don't know about it will learn about it.

1. What's going on with the humidifier not being powered on?

1. The humidifier is completely damaged and cannot be powered on.

2. The power cord of the humidifier is not plugged in, and the humidifier is not powered on.

3. The power cord of the humidifier is not in good contact and is not energized.

4. The power lamp of the humidifier is damaged, although the humidifier is energized, it cannot be seen that the humidifier is energized.

5. The scale in the humidifier is not cleaned, so it causes no power.

6. The atomizer sheet of the humidifier is damaged, so the humidifier is not energized.

Second, the humidifier does not fog up and repairs it by itself.

1. If the atomizer sheet of the humidifier fails, it is enough to replace the atomizer sheet.

2. The humidifier fan is faulty, so the mist can't come out.

3. The humidifier is windy and foggy, and it may be that there is too much scale, resulting in water alkali on the first sheet.

The humidifier is not functioning properly.

4. The water in the humidifier is boiled dry. No fog.

3. The humidifier indicator light is not working.

The humidifier is powered on but the humidifier is not working for a possible reason.

1. Check whether you have added water, if you don't add water, there will be no water mist.

2. The atomizer is not damaged and there is no fogging, which makes the user mistakenly think that the humidifier is not working.

3. Water alkali is formed on the humidifier** sheet, resulting in no water mist in the humidifier, which makes users mistakenly think that the humidifier is powered on but does not work.

4. The clamp is too tight, resulting in the water level float not reaching the height it should have, and the humidifier does not emit water mist.

5. The clip is too loose, the water level sensed at this time is too high, and the humidifier does not produce water mist.

If there is no electricity, it may be burned out or the wire is broken, so I won't do it or take it to the electrical appliance shop to repair it, ask the price first.

The reason for the circuit device is ,,, well.

Summary. 1. Confirm that the power strip is plugged in first; 2. Keep the water level in the water tank (no water in the water tank will cause the humidifier to start the protection and automatically shut down), if there is water in the water tank, the indicator light is orange and always on, and it can be used normally after waiting for the water level sensor to detect the water level; 3. You can apply for the after-sales service in time from: the official service official service official service outlets that you can get for help.

Humidifier suddenly not working? What to do?

1. Confirm that the power strip is plugged in first; 2. Keep the jujube in the water tank with a suitable water level (no water in the water tank will cause the Jingfeng humidifier to start protection and automatically shut down), if there is water in the water tank, the indicator light is orange and always on, and it can be used normally after waiting for the water level sensor to detect the water level; 3. You can apply for the after-sales service in time from: the official service obtained by asking for help The official service Liangyan outlets.

I'm sorry I don't understand, but can you elaborate on that?

1. Humidifier machine fan failure Generally, there are two conditions for the humidifier to work normally, one is that the ceramic oscillator ** produces water mist, and the other is that the fan rotates to send the water mist out. If the humidifier is working but no water mist is coming out, then there is a good chance that the fan is malfunctioning. The solution to the cherry blossom buried number of decisions:

If you don't use it for too long, it will cause the fan to freeze, you can add some lubricating oil and tap it a few times, so that the fan can turn again. 2. If the humidifier has wind but no fog, then it is likely that it is because of the long-term use of tap water, and the scale in the tap water breeds water alkali on the first tablet, resulting in the failure of the first sheet to operate normally, so there is no water mist in the humidifier. Workaround:

You can use a professional descaler to remove scale, if you don't have a professional descaler at hand, you can also make your own, so that the white vinegar and salt are mixed in a certain proportion can also effectively dissolve the scale on the ** tablet, as long as the scale disappears, the humidifier can naturally be used normally. 3. If the humidifier atomizer is faulty If the humidifier is windy but not foggy, and there is no scale on the first sheet, then it is very likely that there is a problem with the atomizer sheet, and there will be no fog without atomization. Workaround:

Check if the fuse is burned first, if the fuse is good, try to adjust the potentiometer on the circuit board, then turn a quarter clockwise to try, if the humidifier still does not spray, you need to replace the atomizer.

In autumn and winter, if there is heating in the room, it will be very dry, and it will make people feel dry throat, pharyngeal inflammation, and feel uncomfortable. Then you need a humidifier to add some humidity to the room, but if the humidifier is used for a period of time, there will be some failures, such as the humidifier is not powered on, or it does not fog, etc., so let's take a look at how to solve the fault such as the humidifier not being powered on.

When carrying out humidifier maintenance, first open the bottom cover of the humidifier to check whether its freshness is burned, if its insurance is good, then you can try to adjust the potentiometer on the humidifier cong Zen device, rotate it clockwise by a quarter, if it still doesn't work, then you can consider replacing the atomizer sheet of the humidifier. Replacing the nebulizer is not a troublesome thing, and it is OK to get a new one when you get it to the place of repair.

When the humidifier is used, it mainly vibrates through the ceramic ** sheet to produce water mist, and then sends the water mist out through the fan, but if all other aspects are normal, but no water mist is discharged, then the judgment can be judged to be a problem with the fan. Usually the fan has been used for too long and will be stuck, in this case, you can put a small amount of lubricating oil in the fan, and gently pat a few times, then it can run normally.

The contact with scale on the humidifier will also cause the humidifier to run poorly, and there will not be much water mist, which may be the water alkali on the ** sheet, and it has been unable to work normally. In this case, the user can deal with it by himself, only need to add some white vinegar to the first tablet, so that the scale can be effectively dissolved and removed, but everyone needs to pay attention to the fact that strong acid cannot be used, which will lead to the corrosion of the first tablet. **After the limescale fiber on the sheet is dissolved, it will be able to work normally.

1. Cracked cracks in the atomizer of the humidifier: Solution: Open the bottom cover to check whether the fuse is burned, if the fuse is good, try to adjust the potentiometer on the circuit board, turn a quarter of a turn clockwise and then try, if it is a humidifier or not spray, then consider replacing the atomizer, generally add the atomizer wetter to a diameter of about 20-30 mm below the spout of the "metal" disc, can not be scraped with a hard object, once the metal plating feast closed layer falls off, the transducer will not work normally, This also causes the humidifier to not fog up.

2. The solution for the humidifier not to fog up: Solution: If the fan is stuck due to being useless for too long, add some lubricating oil and gently pat it twice to let the fan rotate again.

3. The solution of the humidifier does not fog up: use household white vinegar and add some salt, which can effectively dissolve the water alkali. A special humidifier descaler can also be used.