How do I remove 502 glue on my cabinet door?

1. [Insulating oil] secret recipe: Use insulating oil, which is the kind of oil in the transformer, to remove 502 glue The effect is very good. Pour a little insulating oil on the solidified 502 glue, and the glue will soften and remove quickly.

2. [Nail Purification] An occasional one. When sticking shoes, I made 502 glue all over my hands, and I picked up the nail polish cleaner with the mood of trying it out, and wiped it lightly with cotton, and the glue was washed off immediately. (Nail cleaner is easy to buy, also called nail polish remover, and cosmetics are sold everywhere.)

3. [Wind Oil Essence] Try it with Wind Oil Essence, the effect should be good. 4. [Gasoline] Soak some gasoline, rub it, and you're done. 5. [Banana water] 502 glue is stained on the wood, and the banana water can be removed by scrubbing.

6. [Acetone] 502 glue can be wiped off with acetone after sticking. (If a large area is stained with 502 glue and coated with acetone, it can be removed after about 5 to 10 minutes.) ）

If you have 502 glue stuck to your hands, you may wish to try nail polish remover and wash it with a cotton pad dipped in nail polish remover. If you don't have nail polish remover, you can also use vinegar or wind oil essence, and use a cotton swab dipped in vinegar or wind oil essence to wipe directly on the place where 502 glue is sticky several times, so that the glue on your hands can also be removed.

It is actually very easy to remove 502 glue, we only need to wipe it with alcohol or gasoline, it is all for him to be able to remove, and now there are special preparations for removing glue on the Internet, which can be applied directly.

1. Soak it in vinegar and rub it again;

2. Use an eraser to wipe it along the edge little by little, and the effect of alcohol + eraser will be very good;

3. Heat it with a hair dryer to soften it and weaken the viscosity, and then wipe it with the polishing water used to remove the nail polish (wipe it with a cotton swab dipped in nail polish remover);

4. Repeatedly stick and tear with transparent adhesive with good viscosity;

5. Use wind oil essence;

6. The wiping effect with toothpaste is very good.

Viscose is the full name of viscose"Wooden"Cellulose fibers are obtained by extracting and reshaping fiber molecules from natural wood cellulose as a raw material.

The preparation process is: plant cellulose is alkalized into alkali cellulose, and then reacts with carbon disulfide to form cellulose xanthate, and the viscous solution obtained by dissolving in dilute lye solution is called viscose, and viscose is formed into viscose fiber after wet spinning and a series of treatment processes.

1. Soak it in vinegar and rub it again;

2. Use an eraser to wipe it along the edge little by little, and the effect of alcohol + eraser will be very good;

3. Heat it with a hair dryer to soften it, weaken the viscosity, and then wipe it with the polishing water that removes the nail polish (wipe it with a cotton swab dipped in nail polish remover);

4. Repeatedly stick and tear with transparent adhesive with good viscosity;

5. Use wind oil essence;

6. The wiping effect with toothpaste is very good.

1. Wipe with a paper towel dipped in some alcohol or acetone, and it will be clean after a few rubs.

2. Banana water: Banana water is an industrial agent used to remove paint, and it can also be used to remove glue residues.

3. Use wind oil essence: pour wind oil essence on the dispensing glue to cover the entire stain surface. Use a paper towel to wipe back and forth on the stain where the oil essence has been poured. It can be seen that the stain is quickly wiped off.

4. If the trace is shallow, it can be directly erased with an eraser.

5. Use a hot towel to cover the marks for two minutes, and then wipe them vigorously with a towel. You can also use a hair dryer to blow it first, anyway, it will soften the glue and then get rid of it.