How to make a lantern for the Year of the Ox How to make a lantern for the New Year

1. Prepare silicone oiled paper, cardboard, pencil and paper cutter for the kitchen, as shown in the figure below

2. Draw the pattern of the cow on the cardboard, and you can add some other embellishments, as shown in the figure below

3. Cut off the cow on the cardboard and put the silicone oil paper used in the kitchen inside, as shown in the figure below

4. Do a good job of symmetry, as shown in the figure below

5. Light a candle in the silicone oil used in the kitchen to get a handmade cow lantern, as shown in the picture below

1. Prepare a rectangular piece of red origami.

2. Fold it into a fan shape.

3. Fold it in half and paste it together.

4. 4 pieces of the same size need to be pasted together to form a circle.

5. Cut an oval shape with yellow origami, draw the nose and mouth of the cow and paste it.

6. Cut out the eyes with black and white origami and paste them well.

7. Next, use red and yellow origami to cut out the shape of the cow's ears and paste them.

8. Use yellow origami to cut out the two horns of the cow and paste them.

9. The last bullish lantern is made.

Tools needed: cardboard, scissors, ruler, glue.

1. First prepare a piece of red paper.

2. Stick the double-sided tape on the upper and lower sides of the red paper.

3. Compare with a ruler and then use a knife to cut the red paper.

4. Rub glue on the top and bottom of another piece of red paper.

5. Glue the red paper on the glue.

6. Roll up the glued red paper.

7. Stick a strip of paper inside the lantern.

8. Such a good-looking handmade lantern is ready.

Steps. 1. Fold the red paper horizontally; See image below

Steps. 2. Use safety scissors to cut the red paper at an equal distance from the folded place; See image below

Steps. 3. Fold a small part of the yellow paper horizontally and tear it off; See image below

Steps. Fourth, the remaining drawing paper is rolled along the long side; See image below

Steps. 5. Fix the opening with a stapler. For the operation of the Liyan in children, you can also replace the staple limb difference machine with white latex or glue sticks; See image below

Steps. 6. Coat the two long sides of the cut red paper with white latex; See image below

Steps. 7. Roll it up around the yellow straight tube as shown in the figure below; See image below

Steps. 8. Paste a slender red paper strip to make the lantern handle, and the lantern is completed.

Here's how to make New Year's lanterns:

1. Each red cardboard is cut into 3 small rectangles on average, and 4 cardboards are cut into 12 small rectangles.

2. Fold the small rectangular cardboard in half along the horizontal and vertical directions.

4. Fold 6 small rectangular cardboards according to steps 2 and 3. Take two folded cardboards, nail the two corners upwards along the creases with a stapler, and nail the six small rectangular cardboards in turn in the same way.

5. As shown in the figure below, the two corners of the same small rectangular cardboard are fixed with white latex, and then the other five cardboards are fixed in the same way, and half of the lantern is completed.

6. Take the remaining 6 small rectangular cardboards, and make the other half of the lantern as shown in steps 1 to 5.

<>8. Insert the hair root at one end of the lantern, in order to prevent the hair root from slipping off, you can bend the hair root inside the lantern into a ball, and the whole lantern will be made.

Lantern. Chinese lanterns, also collectively known as lanterns, are an ancient traditional handicraft of the Han nationality. Originated in the Western Han Dynasty more than 2,000 years ago, around the Lantern Festival on the 15th day of the first lunar month every year, people hang red lanterns symbolizing the meaning of reunion cherry blossoms to create a festive atmosphere.

Later, the lantern became a symbol of the festivities of the Chinese Senzhen. Through the inheritance and development of generations of lantern artists, a rich variety and superb craftsmanship have been formed. From the kind:

Palace lanterns, yarn lanterns, chandeliers and so on. In terms of modeling, there are characters, landscapes, flowers and birds, dragons and phoenixes, fish and insects, etc., in addition to the marquee lanterns for people to enjoy.

The method of making New Year's lanterns by hand is described in detail as follows:

1. Method 1:

1. Tool raw materials, cardboard, scissors, needle and thread, disposable chopsticks. First, cut the paper into long strips of paper of the same size, wrap the edges of the embroidery booth and paste them at both ends. Wait until the paper strips are wrapped on the embroidery shed, and paste the remaining paper strips together at both ends.

2. Paste it onto the paper strip on the embroidery booth. After the paste is completed, as shown in the figure, connect 3 pieces. Take out the rope or scrap cloth strips, string the bottom paper ring, tighten the cloth strips, tie the cloth strips, and the handmade New Year's lantern is made.

2. Method 2:

1. Prepare the scissors jammed first, then find a red cardboard, fold the cardboard in half, then use scissors to cut it according to **, then cut it well, and then roll the cardboard a few times, it looks like an arc, and then open it, stick double-sided tape on one side, and glue the other side on, it becomes a round barrel.

2. Then shape the glued barrel, press the two ends to the middle, and then slowly adjust the curvature of the paper strip with your hands, the shape of the lantern is basically completed, and then make the first punch to prepare the needle and thread and disposable chopsticks, and thread a few threads with needles at both ends of the lantern and tie the thread on the knot.

3. Tie a small wooden stick to the thread at one end, which can be used as the handle of the lantern, and then cut the cardboard into thin strips with scissors to make the flow comb of the lantern, and then tie the flow comb of the lantern to the lantern, and the lantern is completed.

The production method of handmade lantern beams for the New Year is as follows:Materials required: scissors, stapler, cloth, plastic dish, shoelaces.

1. Use a stapler to fix the 4 plastic plates, and remember to nail between the contact surface of the plate and the plate.

2. Take out a new dish and fix it with a stapler as the bottom of the lantern. Hunger Wheel.

3. Take out another new saucer and cut out a circle in the middle of the letter, so that it is convenient to put a candle or electronic candle as the top of the lantern.

4. Cut out the following rabbit outlines on non-woven fabric, of course, if there is no non-woven fabric, you can also use cardboard at home.

5. Stick the ears first, and then stick the other parts on, and the mouth part can play a role in painting.

6. Put in the candle, fix the candle with glue at the bottom, of course, the electronic candle is safer.

7. On both sides of the top, use a utility knife to make 2 holes, and we use old shoelaces as rope to tie them.

8. A New Year's rabbit lantern is made.

Here's how to make handmade lanterns for the New Year:The Spring Festival, the most worthy of waiting for the gods and gods, is coming soon, and the relatives who have not seen each other for a long time finally have time to reunite. If you want to say that the most festive decoration in the Spring Festival, it must be lanterns and Chinese knots, and what I want to share with you below is a simple cardboard lantern methodPrepare red and yellow cardboard, glue, compass, and scissors.

A thicker jam works better).

1. A square of red cardboard.

2. Draw a circle with a compass and cut it out (you can draw a round thing with a bottle cap if you don't have a compass).

3. Fold in half. <>

4. Fold it in half n times again to form the shape shown below.

<>6. Fold into piano folds along the folded creases, one positive and one backward.

7. Cut two yellow strips of paper.

8. Apply glue on the back of the paper strip.

9. Glue the two yellow strips of paper to the positions shown in the picture below, and the main shape of the lantern will come out.

10. Cut a rectangular yellow piece of paper.

11. Cut into the shape shown in the figure below.

12. Glue it to the middle of the upper part of the reverse side of the lantern.

13. Cut a rectangular yellow strip of paper.

14. Cut out many small thin strips as shown in the figure below.

15. The edge is glued and rolled up, as shown in the figure below.

16. Roll and glue together.

17. Apply glue on the top.

18. Glue to the position of the middle back of the lower part of the lantern, see the picture below, a lantern is ready.

Glued to the position on the back of the middle of the lower part of the lantern, see the picture below, a lantern is ready.

The Chinese New Year's lantern handmade handmade tutorial is as follows. Material preparation: paper cups, double-sided tape, scissors.

Steps:1Take a paper cup and cut off a small portion of the spout.

2.Use scissors to cut the wall of the cup down, don't cut it all, leaving the bottom of the cup of potatoes.

3.Cut the head of the cut strip of paper into a triangle-like shape.

4.Cut the look.

5.Press the paper cup down.

6.Then roll each note slightly inward by hand.

7.After each roll, it is in the shape of a lotus flower.

8.Then take another paper cup and cut out the bottom of the cup.

9.Attach double-sided tape.

10.Glue the paper strip from the other cup to the bottom of the cup with double-sided tape.

11.When all glued to it, it will be in the shape of a drum.

12.Then cut a slip of paper from the cup that had been cut off from the bottom of the cup.

13.Attach double-sided tape to the strip of paper that was just pasted.

14.Then paste the freshly cut paper strip to the double-sided tape to make it more beautiful.

15.The whole lantern is almost formed.