How to make a creative handmade lantern? Handmade creative lantern making methods

Lantern is one of the most representative elements of China, and children and the elderly will like to make some small lanterns to hang at home. Material preparation: colored cardboard, hemp rope, beads, scissors, punches and other materials.

Cut out six strips of paper of the same length and width, use a hole punch to punch a hole in the middle and on both sides, knot the hemp rope through the beads, then pass through the hole in the middle of the strip, pass through the holes on both sides of the strip, and then thread a bead, knot and fix a hanging rope, open the strip of paper into a circle, and the spherical ornament is ready.

Make a skeleton. The relatively simple shape of a paper lantern is a cube or cylinder, and it is best to use bamboo branches or bamboo bark that can be bent to form a frame, and tie the joints with thin wires. Buy a few pieces of white or red ordinary rice paper or sprinkle gold rice paper at the Four Treasures of the Study, cut them to the length and width of the lantern skeleton, and then you can design your own patterns.

Use a piece of tissue paper to trace the desired character on the notebook, then overlap the tissue paper with crimson rice paper, and use a single-edged blade to dig out the handwriting. When the tissue paper is removed, hollowed-out handwriting appears on the red rice paper. The body of the lamp is made of white rice paper, and the red rice paper is pasted inside, and the candlelight or light is reflected from the hollow, and the effect is quite beautiful.

Because the materials in my hand are not complete, and the time is tight, I made an Iron Man lantern, which is a little scary to look at! I've used EVA to make a lot of Iron Man helmets, big and small, so I used the smallest helmet, with luminous flakes at the eye level, powered by batteries and switches. Because it's a lantern, I wondered if it should have the feeling of spikes, so I added some spikes on both sides of Iron Man's helmet!

First glue the two ends of the can with black tape, then use a ruler and a utility knife to draw a straight line evenly on the bottle body, then cut it with a utility knife, remove the mouth of the can with a knife, press the bottle mouth and the bottom of the bottle with your hand to make the shape of the lantern, after the shape of the lantern is done, make a handle with the wire at the mouth of the bottle, put in the candle and light it, and the can lantern is ready, is it very beautiful.

Use the juice box as the main body of the lantern, cut out the four sides according to the shape you want, I simply cut out the rectangle, use colored paper to cut the rectangle according to the rectangle you cut out, the rectangle is slightly larger than the juice box cut, which is convenient for subsequent pasting. You can draw it first and engrave it with a carving knife, or you can cut out a simple pattern directly with scissors. Spread a layer of paper towel on top of the paper cut and paste it.

If conditions permit, it is better to use rice paper or oil paper, at that time I did not have the materials, directly use paper towels. Paste the paper cut with the paper towel pasted into the rectangular position cut out of the juice carton. Make small holes on the left and right sides of the juice box to make it easy to thread the rope.

Place a candle inside the juice box.

A simple disposable paper cup is handmade, and you can make a small lantern full of New Year's flavor in a few minutes. First, use tape to paste the red pattern on the paper cup, then cut off the raised part of the bottle mouth and cut it from the bottle mouth to the bottom of the bottle. Cut out a cup bottom from another paper cup, poke the hole and string a red string with the word Xi, combine the paper cup and the bottom of the cup like the ** above, and then wrap the top and bottom of the lantern with a red ribbon.

The super cute Chinese-style lantern is ready, and I can't wait to hang it.

This is very simple, you can use a disposable water cup to make it, first take out a paper cup and cut it from the mouth of the cup to the bottom of the cup. Cut the bottom of the cup from the other paper cup and cut it along the edges. Poke holes in the center of both cup bottoms and put on a red string.

Then make tassels out of red paper and roll them onto the red string. Finally, you can cut out some small square pieces of paper, write good wishes, and stick them to the side of the lantern.

The lanterns are handmade! Materials: white paper, potato stalks for frames, fine silk, colored paper, etc.

First of all, make the bottom first, the middle of the bottom, with a dense wire, fold a small section, upward. This is used to put candles. Then, paste the white flour paper on the frame of the lantern and cut the colored paper into various flowers.

Bird. Stick it on white paper. After a while, a handmade lantern was made.

We have had a soft spot for lanterns since ancient times. Whether it is a festival or a celebration, lanterns are always indispensable. So how do we make a simple and dexterous little lantern?

Confetti rulers. Wallpaper knife double-sided tape.

01 As shown below, we take a rectangular piece of cardboard and draw a 1 cm edge line on each side.

02 Draw evenly spaced spaces at equal distances between the edges drawn above. It can be spaced at 1 cm spacing.

03 Cut the place where the line is drawn on it with a wallpaper knife and cut it to the position of the edge line on both sides. Then the edges on both sides fold inward.

04 Fold the shape from step 3 outwards and put the edges on both sides together. This is in the shape of a lantern.

Pay attention to safety when using a wallpaper knife.

Here's how to make a lantern:

In the first step, first fold the red envelope in half along the middle and blindly, and then fold the four corners along the line after the middle is folded in half, and the rock Qiao sells the remaining 14 in the same way.

In the second step, the 5 corners of the red envelope are stapled with a stapler, and the upper part of the lantern is formed. Take another 5 red envelopes and make the bottom half of the lantern in the same way. At this time, the middle part of the lantern was still missing.

In the third step, the middle part of the lantern must be turned horizontally with the remaining 5 red envelopes, which are also tied to the corner and corner of the lantern in the upper part with a stapler.

Fourth, there is no need to rush to tie the lower part up, at this time, the rope of the pendant should be passed through the hole in the middle of the upper part, otherwise the pendant will not be installed.

Fifth, after the pendant is finally worn, the lower and middle parts of the lantern can be fixed diagonally with a stapler, and a beautiful leather dismantling of the homemade lantern is completed.

Step 6, but if you still want to make the lantern more perfect and beautiful, you can use your hands to pull the flat part of the red envelope out with your hands, so that the lantern will become more "reunited".

Chinese lanterns, also known as canopy jujube lanterns, are an ancient traditional handicraft of the Han nationality. After thousands of years of development, lanterns have developed different regional styles, each with a unique artistic expression.

The handmade lantern method is as follows:Preparation: paper cups, red celery macro line, glue or double-sided tape, colored pen or gouache and scissors.

The steps are as follows: 1. Make a paper cup accurate, and then cut the paper cup evenly into strips of consistent size along the mouth to the bottom. After cutting lengthwise, trim the rim of the cup to ensure neatness and simplicity.

You can trim the strips of the cup body to ensure that the width of the strips is consistent, and try to cut the edge smooth and rectangular.

2. After trimming, bend the vertical strips to the inside one by one, and initially show the shape of the lantern. Then, take out the other prepared paper cup and cut out the mouth part, leaving only the bottom of the cup about 2 cm.

3. The bottom of the retained cup should be cut out of the same size in accordance with the cutting method of the previous paper cup. At the bottom of each of the two paper cups, drill a small hole and thread it with red thread. Then glue the vertical strips of the two paper cups together, and after the bonding is completed, the lantern is almost formed, and you can also use your creativity to add some other decorations.

First of all, prepare 12 pieces of handmade origami, a good pendant, scissors, double-sided tape, and a red rope. Take a piece of paper and fold it diagonally, the other two corners in half, and fold it in half again. When folded, it will form a shape similar to clothing.

Fold 12 identical origami pieces in the same way, and glue the double-sided tape on both sides of the origami to glue the origami. After gluing, glue the red rope with double-sided tape, stick it to the top of the lantern, and then glue the pendant to the tail.

Chinese lanterns, also collectively known as lanterns, are an ancient traditional handicraft of the Han nationality. Originated in the Western Han Dynasty more than 2,000 years ago, around the Lantern Festival on the fifteenth day of the first lunar month every year, people hang red lanterns symbolizing the meaning of reunion to create a festive atmosphere. Later, the lantern became a symbol of Chinese festivities.

Through the inheritance and development of generations of lantern artists, a rich variety and superb craftsmanship have been formed. From the types: palace lanterns, yarn laughing lights, chandeliers and so on.

In terms of modeling, there are virtual figures, landscapes, flowers and birds, dragons and phoenixes, fish and insects, etc., in addition to the marquee lanterns for people to enjoy.

1. Prepare scissors, red and pink cardboard first (novices need to prepare a few more);

2. Take out a piece of red cardboard and fold the cardboard in half;

3. Cut the cardboard along the "paper ridge" and reserve 5 cm at the end.

4. Roll the cardboard a few more times to make it look arc-shaped;

5. Then open the rolled cardboard, connect end to end, and glue it together with double-sided tape to form a cylindrical shape;

6. Press down the glued cylinder, and then slowly adjust the curvature of the paper strip by hand, and the main part of the lantern will be made;

7. Use needles and threads and disposable chopsticks to thread a few threads at both ends of the lantern and tie the threads in knots;

8. Tie a small wooden stick to the thread at one end, which can be used as the handle of the lantern;

9. Then cut the two colors of cardboard into thin strips with scissors and mix them as the tassels of the lanterns;

10. Tie the tassel of the lantern to the main part of the production, and the lantern is completed.

Hello, I'm glad to answer for you, kiss Make handmade lanterns:1Prepare the materials:

Colored paper, heat shrinkable tubes, light bulbs, etc. 2.Design Patterns:

Draw your favorite pattern on the confetti and it will become the look of your lantern. 3.Paste pattern:

Cut the colored paper into several pieces and paste Chi He on the heat shrink tube, and you can paste the pattern more finely according to your own ideas. 4.Soldering circuits:

Install the bulb on the heat shrink tubing, and then connect the heat shrink tubing with the battery with a wire. 5.Installed:

The handmade lanterns are finished and can be hung up and lit to decorate them.