How to make red lanterns handmade, red lantern making methods

How to make lanterns by hand is as follows: 1. First prepare the materials needed to make straw lanterns:

Disposable cups, straws, scissors, rubber bands, utility knives, rope, first use scissors to cut off part of the upper edge of the disposable cup, and then use a utility knife to make a hole in the bottom of the disposable cup, and pass the rope through the hole at the bottom of the disposable cup.

2. Fill the bulb into the disposable water cup, and then cut the prepared colorful straw to a slightly longer length than the disposable water cup.

3. Arrange the cut straws around the disposable straws in turn, fix the straws with ropes, and the simple straw lantern is completed. Power on the bulb and you'll get a simple and beautiful handmade lantern. Lanterns are also known as lanterns, lanterns, lanterns, lanterns, palace lanterns, and bridal lanterns.

Chinese lanterns, also collectively known as lanterns, are an ancient traditional handicraft of the Han nationality. Originated in the Western Han Dynasty more than 2,100 years ago, around the Lantern Festival on the fifteenth day of the first lunar month every year, people hang red lanterns symbolizing the meaning of reunion to create a festive atmosphere. Later, the lantern became a symbol of Chinese festivities.

Through the inheritance and development of generations of lantern artists, a rich variety and superb craftsmanship have been formed. From the types: palace lamps, yarn lamps, chandeliers and so on.

In terms of modeling, there are characters, landscapes, flowers and birds, dragons and phoenixes, fish and insects, etc., in addition to the marquee lanterns for people to enjoy. Legends about lanterns:

Legend has it that a long time ago, there were many fierce birds and beasts, hurting people and livestock everywhere, people organized to fight them, and there was a mythical bird that landed on earth because it got lost, but was shot dead by an unwitting hunter. When the Emperor of Heaven found out, he was very angry, and ordered the heavenly soldiers to set fire to the world on the fifteenth day of the first lunar month, and burned all the human and animal property in the world. The daughter of the Emperor of Heaven was kind-hearted and could not bear to see the innocent suffering of the people, so she secretly came to the world and told the people the news.

A smart man came up with a way, and he let everyone in the New Year.

Ten. Five, ten.

For the three days of June and Seventeen, they put up lights, lit firecrackers, and set off fireworks at home, so that the Emperor of Heaven would think that the Heavenly Soldiers had set fires. On the night of the fifteenth day of the first lunar month, the Emperor of Heaven looked down and found that there was a red light in the world, and the sound shook the sky, and it was like this for three consecutive nights, thinking that it was the flames of the fire and gave up. In order to commemorate this success, every 15th day of the first lunar month, every household hangs lanterns to commemorate this day.

Handmade lantern tutorial for elementary school students.

1. First prepare a rectangular piece of colored paper;

2. Use a ruler to draw a middle line on the colored paper;

4. Draw a straight line along the dot with a ruler;

5. Use a knife to cut the paper along the drawn middle line;

6. Cut out a long strip again;

7. Continue to cut along the straight line drawn, and pay attention not to draw at both ends;

8. Paste double-sided tape on both sides of the remaining colored paper;

9. Paste two pieces of colored paper together on both sides;

10. Glue the excess part of the colored paper at the bottom with double-sided tape;

11. Glue the two ends together;

12. The shape of the lantern comes out;

13. Glue a long strip on the top of the lantern;

14. Beautiful handmade lanterns for elementary school students are made!

The method of making lanterns by hand is as follows: 1. Fold the red paper horizontally in half, and use safety scissors to cut the red paper at an equal distance from the folded place. 2. Fold a small part of the yellow paper horizontally and tear it off, roll up the remaining paper along the long side, and fix the opening with a stapler.

You can also replace the stapler with white latex or glue sticks. 3. Coat the two long sides of the cut red paper with white latex, and roll them up around the yellow straight tube as shown in the figure below. 4. Paste slender red paper strips to make lantern handles, and the colored paper lanterns are completed.

Hanging lanterns during the Lantern Festival: Hanging lanterns during the New Year is a traditional custom in our country, which is full of festive atmosphere. Lantern is a kind of Han traditional folk handicraft originated in China, in ancient times, its main role is lighting, by paper or silk as the outer skin of the lantern, the skeleton is usually made of bamboo or wooden strips, put a candle or light bulb in the middle, become a lighting tool.

Influenced by Han culture, lanterns are also quite common items in temples in many countries in Chinese areas of Asia. According to Chinese folk tradition, on this night when the moon is high in the sky, people light up 10,000 lanterns to celebrate. Go out to enjoy the moon, light the lanterns, guess the lantern riddles, eat the Lantern Festival, and reunite with the family.

The Lantern Festival is also known as the Lantern Festival, the custom of lighting lanterns during the Lantern Festival originated in the Han Dynasty, and in the Tang Dynasty, the lantern appreciation activities were more prosperous, the palace and the streets were hung with lights everywhere, and tall lantern wheels, lantern towers and lantern trees were also established.

Preparation materials tools: square cardboard, tassels, glue. 1. Prepare a 15x15cm square cardboard.

2. Fold the corners in half twice, and fold them in half twice from side to side.

3. Fold it inward and flatten the cardboard into a small square.

4. Align the edges to the crease of the middle line.

5. Then open the inner fold and flatten.

6. Fold the four corners inward and flatten them again.

7. Fold the rest of the corners in half and stuff them inside.

8. Jam paper, cut off the corners with scissors.

9. Thread the tassel through the hole.

10. Apply glue to the cardboard.

11. Press the other half up, and the lantern will be made.

12. a finished product.

Here's how to make a red lantern:Tools Ingredients: Hard-shell red packets (4 pcs), double-sided tape.

1. Prepare 4 red envelopes. You need that kind of cardboard shell red envelope so that it can stand up.

2. Fold the red envelope horizontally in half. The front of the red envelope is outside.

3. Fold the red envelope in half lengthwise.

4. Fold the four corners of the red envelope after folding.

5. Repeat the operation of the other 3 red envelopes in the above way.

6. Use double-sided tape to paste the corners of the red packets together. All 4 red packets are folded and pasted.

7. Complete the production of lanterns.

Here's how to make red lanterns by hand:

1. Tools Raw Materials:

Red and yellow cardboard, scissors, double-sided tape.

Second, the specific steps:

1. Prepare a piece of 8*15 cm red cardboard, leaving centimeters at the upper and lower ends. As shown in the figure below:

2. Double-sided tape is pasted vertically in the middle of the cardboard, pay attention to the spacing between the double-sided tape as much as possible to keep a celery touch, and leave a little gap at the end of the cardboard. As shown in the figure below:

3. Use red paper to cut some discs with a diameter of centimeters and fold them in half. The number of discs should be the same as the number of double-sided tape just pasted. Then attach the folded disc in half to the double-sided tape, taking care to stick it to the center of the double-sided tape. As shown in the figure below:

4. Paste double-sided tape on the last position of the cardboard, and stick it from end to end. As shown in the figure below:

5. Prepare a piece of 5*15 cm cardboard and cut it into tassels. As shown in the figure below:

6. Paste the tassel on the lower end of the lantern, and then paste a small note on the tassel to beautify it. As shown in the figure below:

7. Use red cardboard to make a handle for the lantern and stick it on the top of the lantern. So that the red lantern is ready. As shown in the figure below:

Here's how to make a red lantern:

Prepare tools: 2 sheets of colored cardboard, scissors, solid glue or double-sided tape, pencils, rulers, utility knives.

Production steps: 1. First find a piece of hard red paper as the roll paper bucket material, and then find two pieces of red paper, which are larger than the paper tube or more than 20 cm long.

2. Fold the cardboard into a cylinder, and staple the two ends of the cylinder with staples or glue. The circumference of the paper tube should be less than the width of the tissue paper.

3. Fold both ends of the width of the two sheets of tissue paper (with a slight imprint or draw a straight line with a pencil), and then use scissors or a paper cutter to cut the middle of the tissue paper into strips about 1 cm wide, and cut them to the imprint folded at both ends, do not cut through.

4. Then stick one end of the cut tissue paper to the end of the paper tube with glue or staples, and the two pieces of paper should be staggered and wound around the paper tube. The same is true at the other end.

5. Tie small holes at both ends of the paper tube with a sharp needle, tie a rope carrying a lantern at one end, and tie a red lamp spike at the other end.

Precautions: When making paper lanterns, whether it is paper cutting or paper cutting, you need to fold the traces, but do not fold the traces too much, and the imprint is not obvious, otherwise it will affect the appearance. In addition, the middle paper tube can be used a harder Guangkai return paper or other packaging paper, which is better for waste utilization.

You must be careful during the production process, you can't be cut by scissors, and the made lanterns need to be lightly patted and handled.

1. Prepare materials.

To make a red lantern, you first have to prepare the materials, a piece of red drawing paper, a yellow drawing paper, a pair of safety scissors, a latex stick, a red hair root, and a stapler.

2. Align the red paper.

Take out a piece of red drawing paper and fold it in half to make sure it is aligned.

3. Cropping. After folding the red paper in half, cut it from the crease to the top, and cut out the length of the distance of the filial piety.

4. Yellow paper cutting.

Tear off a small portion of the yellow paper and fold the sides together in half to form a cylinder.

5. Booking. Make the Zen beam use a stapler to staple the interfaces on both sides, or use a glue stick to glue them together.

6. Combination. Apply glue sticks on both sides of the cut red paper, and then surround the yellow straight tube.

7. Done. Prepare a piece of red rectangular paper, stick it to the lantern, make the handle of the Shinhiro red lantern, and the red lantern is ready.