Parts of laptops that are easily damaged

Yang Huang Ding Yi tasted the extension of the summer, embraced the goose skirt, served the fragrance of the pool, and the crisp Xie Gang bundled the sleeping party.

Greetings to you and my friend: send you sunshine, evaporate pain for you, send you drizzle, wash away the filth for you. Send you a shooting star, take away the nightmare for you, you're happy!

Graphics card, of course. It's a delicate thing, and it's usually the first component in the computer to strike.

The second is the hard disk.,This thing is also delicate.,It's over when you touch it.。。。

The third is the memory module. The probability of this failure is generally not large. But the most common one used to upgrade ...

The fourth is the fan, including the fan on the hard disk or graphics card, but the graphics card of the general notebook does not have this thing. This thing keeps turning this as long as it's turned on.,It's easy to break.。。。

The fifth one is the motherboard. Sometimes it burns out... I haven't come across it.

Remember to clean the dust inside and outside the heat vent once a year... The same is true on the fan blades.

It's usually a memory module, right? Mine just broke a piece of memory, and it's been less than half a year!! Sadly, the quality of different brands of computers is different! The so-called penny is worth the goods!

Laptop motherboard parts are prone to breakage, and taking good care of the motherboard can prevent it from breaking down too quickly.

The motherboard is almost the most breakable part of a laptop. Because the motherboard has a high degree of integration, many separate components, resistances, capacitors, and countless integrated chips, the south bridge and north bridge with a super high degree of integration are also made on the motherboard, and any component or chip failure, which will damage the motherboard.

Therefore, in the laptop repair industry, the failure rate of notebook motherboards should account for more than sixty percent of the entire laptop failures. It can be seen that laptop motherboards are the most vulnerable to damage. Due to the high cost of purchasing notebook motherboards, there are few on the market, and even fewer are brand new.

The chips on the motherboard are not easy to buy, so it is very expensive to repair the motherboard** upside down. The motherboard is so easy to break, and it is so expensive to repair, so what are the ways and means or how to protect and maintain the motherboard? Then I will briefly put forward a few points to effectively protect the motherboard from damage as much as possible.

First of all, don't let the laptop get fluid. That is, do not drink water, eat watermelon, drink drinks, eat, etc. while using the laptop, and do not place liquids next to the computer, such as tea, drinks, etc., especially some acidic drinks, because, for fear of accidentally tipping over the water glass.

Laptops are indispensable tools for our daily work, study, and entertainment. However, due to various reasons, our laptops will inevitably have problems with the source of the source of hardware, what should we do when this is rotten?

1.Check for hardware issues.

First of all, it is very important that you clarify the condition of your laptop, whether it is a power issue or a screen condition, a motherboard issue or a memory issue. If you're not sure what the problem is, it's best to go to a professional computer repair shop for testing and diagnosis.

2.Find guidance and help.

If you are an experienced computer user, you can solve the problem by reading the laptop's user manual or tutorials on the Internet. If you don't know the details of your computer's hardware, then it's best to find a professional and credible repairer to repair it.

3.Repair or replacement of parts.

If you determine what the problem is, you can try repairing or replacing the damaged part. For example, if something goes wrong with your battery, you can replace it with a new one. If your screen is cracked, you may need to replace it with a new one.

4.Back up your data.

If you need to repair your computer, it's a good idea to back up your data before repairing it. You can back up your data to an external hard disk or cloud service to avoid data loss.

In short, when your laptop encounters hardware problems, you need to first identify the problem**, find guidance and help, and take appropriate measures to fix the problem while protecting your data.

If you often use an optical drive to watch movies, the optical drive is the first to be broken.

If you're using a dusty environment, the fan is the first to break.

If you have a cat or something like that, the screen is the first to be broken.

If you like to drink tea and are more careless, the motherboard is the first to break.

If you're a gaming fan and you're going to spend hours at night playing big games a day, the graphics card is the first to break.

Also, the battery and keyboard are not very durable.

As long as you have a good habit, the machine will generally not break, and the normal life of the notebook is 3-5 years.

It's really hard to say. Some computers that have been used for more than 10 years will also break down a fan.

Keyboard and mouse, do you need to talk about it?

You have to press when you're happy, and you're going to be abused when you're unhappy.

You bear it silently when you spray rice, and you have to bear your rain and dew when you drink water!

It's hard to be a keyboard and mouse!

I used a 10-year-old computer and it broke the optical drive.

Laptops are fans, desktops are optical drives.

The most susceptible areas of a computer to heat up are not necessarily the most prone to breakage, in contrast to the assembly machine, compatibility depends on how often it has problems. For example:

Memory: This is the most problematic thing, many hardware, memory repeatedly cache data, the interface is not clean, or viruses appear, etc., will cause boot failure or blue screen of death. On the contrary, the CPU heats up a lot, but it doesn't necessarily happen often, because it generates a lot of heat, there is a fan to dissipate heat, and the lines are well sealed, so it is not easy to have problems unless the overclocking system slows down.

The voltage is unstable, the fan is unstable, etc.

The exception is the optical drive, which is based on the frequency and status of use.