Why doesn t my pumpkin bloom and what to do if the pumpkin doesn t bloom?

When the plant enters the flowering stage, the decaying organic fertilizer should be mainly phosphorus and potassium fertilizer, and the tender shoot tips should be reduced or stopped. Commonly known as less fat.

Pumpkin cultivation precautions:

Method. 1. Pick the top of the pumpkin at the right time: when the pumpkin vine grows to 2 meters, remove the growth point of the main vine, so that the main vine grows 3 or 4 branches, and blooms and bears melons.

Method. 2. Build a trellis for pumpkins: When the pumpkin vines grow to 2 meters, lead the vines to the shed, which can improve the light transmission and ventilation conditions, reduce pests and diseases, and increase the melon sitting rate by more than 40%.

Method. 3. Prevent pumpkin from growing: If the pumpkin vine grows will also cause less melon, such as cutting a crack on the vine 30 cm from the root, stuffing a piece of charcoal, it can inhibit the growth. At the same time, it is also necessary to pay attention to controlling the amount of nitrogen fertilizer and increasing the application of phosphorus and potassium fertilizer.

Method. Fourth, the pumpkin for auxiliary pollination: first of all, the female flowers that are about to open and pollinated, covered with melon leaves, to prevent rain from invading, the next morning at 9 o'clock, pick the male flowers on the different plants and cover the female flowers, and then remove them after 3 days.

Method. 5. Remove the yellow leaves of pumpkin: On the melon vines that have blossomed and fruited, remove the foot leaves and old yellow leaves in time, and remove 30% of the male flowers, which can not only ventilate and transmit light, but also reduce the consumption of nutrients.

Maybe it's not adapted to blooming this season, and it's also related to the moderate temperature, and the climate you have there.

Good luck with your pumpkins blooming soon!

Why do the pumpkins I grow don't bear fruit when they bloom alone? In fact, I didn't grasp these 4 tricks.

Pumpkins without male flowers are pollinated as follows:

In the case that the female pumpkin flowers are in full bloom but there is no male pollination, you can borrow someone else's male pumpkin flowers to pollinate the female flowers, or cut off the male flowers when the male flowers are not fully blooming, find a utensil to seal and preserve, and wait until the female flowers open before pollination. Pumpkins do not bear fruit without pollination, and even if the female flowers grow small melons, they will slowly fall off after a while.

Manual pollination is required when there are fewer insects, such as bees or butterflies that can help with pollination. If it is not pollinated artificially, even if the female flowers have already produced small melons, they will slowly wither. The pollination time of pumpkin should be around 6-8 o'clock in sunny weather, and the pollination time is too late to reduce the activity of the flowers, and the success rate of pollination will also be reduced.

Because pumpkins are basically male flowers that bloom first, and then female flowers. And in general, it is a female pumpkin flower.

There are more than males, which is also convenient for pumpkin flower pollination. Of course, if the planting time is not right, there will be the situation that the subject said: only male flowers will appear, or only female flowers will appear.

This is because the requirements of the female and male flowers of pumpkin are different from the external environment. Pumpkin flowers like males have lower temperature requirements and require longer hours of sunlight. Females, on the other hand, require higher temperatures and shorter daylight hours.

If the planting time is not right, such as sowing too early, when the male flowers of the pumpkin bloom, but the temperature is not high enough, this will also cause the female flowers to bloom late. As a result, the pumpkin only blooms but does not bear fruit.

Of course, if the fertilizer is not applied properly, the excessive application of nitrogen fertilizer will cause the pumpkin to grow vigorously, and the branches and leaves will be too lush, which will affect the ventilation and light transmission of the pumpkin, so that only male flowers may appear. Therefore, it is also necessary to reasonably control water and fertilizer, and prune it in time. If the pumpkin fertilization is also reasonable, and the branches are not vigorous, just because of the temperature, resulting in the situation that it only blooms, then there is no need to worry too much, as long as the temperature is adjusted, and when the temperature rises, the pumpkin is suitable for flowering, and it will naturally bloom!

If you want to improve fruit set, you can do a human-assisted pollination. It is to directly pluck the male flower, buckle it on the female flower, and shake the pollen on the male and female flowers to let them complete pollination.

There is no such thing as a "male pumpkin" in the world.

The pistils and stamens of pumpkins do not grow in the same flower, and the flowers on the branches are male and female.

In appearance, the female and male flowers look about the same;

But it's different inside.

The female flower has an ovary that grows into a large pumpkin and a stigma that receives pollen, and the male flower has filaments, anthers, and pollen inside.

Only when the pollen from the male flower is imparted to the stigma of the female flower can the female flower give birth to the fruit ——— pumpkin.

Why are most of the flowers that bloom in early summer male? Because the male and female flowers of pumpkins have different requirements for the outside world.

Male flowers prefer cooler temperatures and longer sunshine hours than female flowers, and the climate in early summer is suitable for male flowers and less suitable for female flowers.

Also, when we plant melons late in the season, when it is time to flower, the melon seedlings are not fully mature, and it is very likely that only male flowers will bloom;

The soil is not fertile, there is a lack of nitrogen fertilizer, potassium fertilizer, etc., and only male flowers are seen on the melon vines.

Summary. Causes of Pumpkin Not BloomingPumpkins not blooming can be due to reasons such as insufficient light, unsuitable soil, or too much fertilizer.

Causes of Pumpkin Not BloomingPumpkins not blooming can be due to reasons such as insufficient light, unsuitable soil, or too much fertilizer.

If the male flowers of the pumpkin do not bloom, you can supplement the nutrition of the molded Yuhualing No. 6 to promote the opening of the male flowers. It can also maintain a lower temperature environment and can also promote the opening of tall flowers in the male nucleus.

Hope it helps.

If you are still satisfied with my reply, please give me a thumbs up, your efforts are very important to me. We look forward to seeing your supporters! Thank you for the first pickup! <>

I wish you a happy life and all the best! <>

When a pumpkin plant blooms, it usually has two types of flowers: male (male) and female (female). The male flower has stamens and pollen, while the female flower has a stigma and ovary. If your pumpkin plant only has a mother flower and not a male flower, there are several possible reasons:

Age: Pumpkin plants may only have mother flowers when they first start flowering. Usually, the plant will bloom the mother flower first, and then the celery will start to bloom the male flower. This is a normal growth process as pumpkin plants need enough time to grow and develop to produce mature male flowers.

Nutrient deficiencies: Pumpkin plants that lack proper nutrients can affect flower bud formation and flowering processes. Make sure to provide pumpkin plants with plenty of sunlight, water, and proper fertilizer to promote healthy plant growth and flower formation.

Poor environmental conditions: Pumpkin plants need the right environmental conditions to bloom smoothly. Temperatures that are too high or too low, humidity or lack of light can affect bud development and flowering.

Make sure to provide the right environment for the pumpkin plants to grow, and try to create stable temperature and humidity conditions.

Control the number of flower buds: Pumpkin plants usually produce a lot of flower buds, but they may not bloom at the same time. Controlling the number of flower buds helps plants concentrate energy and nutrient resources to support flower development and flowering.

Pollination problems: The male flowers of pumpkin plants need to be pollinated by pollen transfer to the mother flower. If there are not enough pollinators (such as insects or wind), or if the pollen quality is not good, it can cause the male flower to not be pollinated successfully.

In this case, you can do pollination manually, gently brushing the pollen from the male flower to the columella of the mother flower.

Note that the flowering process of pumpkin plants is influenced by many factors, so it is not necessarily unusual to have only the mother flower and not the male flower. Thank you.

Summary. Dear, good evening, I'm very happy to answer your embarrassment, there are a few aspects you can refer to, it may be too dry or fertility can not be reached, simple pollination problems can be dipped in male pollen with a brush, point pistils, or sowing too early, or temperature, pollination is not sufficient and other reasons.

If the female pumpkin flower has bloomed but the male flower has not yet bloomed, you have only one plant. You can take pollen from other places, or wait for the male flowers to bloom, use a brush to take the pollen and save it, and when the female flowers bloom later, use a brush to pollinate the preserved pollen.

The female pumpkin flower has bloomed, and the small melon has bloomed, but the male flower has not yet bloomed, and there is no one else nearby to grow the pumpkin, what should I do?

Hello dear, I am a gold medal mentor of Yanmo Social Livelihood, I have provided services to 4,000 people in total, and the cumulative service time is more than 3,000 hours! I have received your question, it will take some time to answer, please wait a little bit, it will take 5 minutes to get the result, please don't end the consultation, you can also provide more effective information, so that I can better answer for you If my answer is helpful to you, please give it a thumbs up, thank you for <>

Dear, good evening, I'm very happy to answer your embarrassment, there are a few aspects you can refer to, it may be too dry or fertility can not be reached, simple pollination problems can be dipped in male pollen with a brush, point pistils, or sowing too early, or temperature, pollination is not sufficient and other reasons. If the female pumpkin flower has bloomed but the male flower has not yet bloomed, you have only one plant. You can take pollen from elsewhere, or wait for the male flowers to bloom, use the brush to take the cover to dig the flowers to know the stuffy pollen to preserve, and when the female flowers bloom in the future, use the brush to save the pollen to the pollination.

So do you want to cut off this female flower, anyway, it can't bear fruit, keep it for the loss camp to talk about wide raising, I have two trees, both of which are female flowers that have bloomed several, and the male flowers still contain Li Liang and did not open. It's a shame to watch.

It is recommended that you go to the type to see if there are any female Bu Xun Chong flowers in other houses, if there is a long and dry can ask if you can take some pollen for pollination, if not, this is best for you to decide, cut off or not.

In fact, it doesn't matter if you cut it off or not.

Will these guys be able to grow up? On the premise that there are no male flowers.

What if I don't want the pumpkin to grow too tall?

It is recommended that you cap the rack. When the pumpkin vine grows to about 2 meters, you can consider selling the main vine for capping, that is, removing the growth point on the main pumpkin vine, and after a few days, 3 to 4 branches will grow on the main vine.

There are 5 reasons why pumpkins don't bloom:

1. The seeds and hectares of pumpkin will be degraded for a long time, that is, they will not bloom during the flowering period, which is caused by the degradation of seeds;

2. Insufficient sunlight, excessive potting soil or less potting soil will also cause pumpkins not to bloom;

3. Due to excessive nitrogen fertilizer and watering, the nutritional growth of pumpkin is excessive;

4. Too much water and fertilizer, pumpkin only develops vegetative growth, and does not carry out reproductive growth;

5. Variety problem, if the male and female flowers do not bloom, that is, the canopy wheel pumpkin variety is a late-maturing variety.

Pumpkins do not bloom may be due to insufficient sunlight when planting, unsuitable soil or excessive fertilization, pumpkins are short-day plants, except for summer, they must receive sufficient sunlight in other seasons, and they should also prevent pests and diseases when planting to prevent the plant from being damaged. When planting pumpkins, you can pinch the vines after the flowers have withered, which can improve the quality of the fruit.

1. Insufficient light

Pumpkin is a common vegetable in life, so why don't pumpkins bloom when planting, when planting pumpkins, let the melon vines receive sufficient light, insufficient light pumpkins will only grow leaves and not bloom, and the melon vines will not bear fruit when it is serious. Pumpkins are short-day plants that receive light in all seasons except summer.

2. Soil discomfort

Pumpkin is suitable for growing in fertile soil, if the soil nutrients are not enough pumpkin can not flower, then you can properly apply some organic fertilizer or liquid fertilizer to the soil, the soil nutrients are sufficient pumpkin will bloom, but the amount of fertilizer should not be too much, otherwise there will be a reaction, resulting in melon vine growth.

3. Excessive fertilization

When planting pumpkins, you should fertilize reasonably, too much fertilizer will cause pumpkins to only grow melon vines and not bloom, then you need to stop fertilizing for a week, and then continue fertilizing after the plants grow flowers. When planting pumpkins, you can apply fertilizer with a low concentration to the pumpkin, and you can not apply fertilizer or fertilizer with too high concentration.

4. Precautions

When planting pumpkins, it is necessary to water the melon vines in time, and pay attention to the prevention of pests and diseases to prevent the plants from being invaded by diseases. When planting pumpkins, you can pinch the melon vine after the flowers wither, which can improve the quality of the fruit and improve the yield of the melon vine.