-
Anonymous users2024-02-12It is not easy to crack with cement sealing, but the cement is marked.
Don't be too big, or fill it with intumescent glue, and seal the surface with cement, which will be better sealed.
1.This phenomenon is widespread and depends on the door frame and door.
The hole is not a whole, and the impact of the anti-theft door on the door frame and the door opening is great, and the two materials are also different, and the cracks are basically inevitable.
2.If you want to prevent it from seeing, you just need to wrap it with a door frame panel to cover the cracks and not see it. Fastness may not have a big impact.
If the newly poured cement has not been hardened, it can be supported by squeezing with wooden sticks and woodworking boards, and then retreating after the cement hardens. If the cement inside has hardened, there is no good way.
1.Some people have a misunderstanding of the role of styrofoam, thinking that it can also have the effect of fixing the door leaf, so they insist on applying glue to the gaps in the door after changing. "In fact, it only has the effect of plugging small gaps and improving aesthetics.
Moreover, styrofoam is very easy to age, and some can even be picked off by hand.
2.Styrofoam is an anti-theft door. Paints.
Indispensable auxiliary materials such as polymer doors refer to one-component adhesives that are dry and solid by touching gas or pressed dry solid. It has the characteristics of high bonding hardness, good aging resistance, simple use and moisture resistance, and is generally used for wood patchwork. metal, paper, honeycomb aluminum, insulating foam board.
Bonding (or hybrid bonding) of rock wool boards, aluminum silicate fiber felt products, etc.
3.If the gap is relatively small, it may be able to help repair, but if it is a large gap, you may want to use cement mortar independently.
After filling in the door frame of the anti-theft door, the workers will generally use cement mortar to fill the joint, and then brush the waterproof putty.
Then hang a layer of putty, and you can cover the gap very well. Generally, it is not recommended that the owners of the community use styrofoam to plug the joints. Because even if you make up the glue, it is likely not to work as desired.
Cause: The hinge ring may be caused by the wet cold gas or the dust entering the hinge box of the anti-theft door, which causes the hinge to rub against the hinge pin and cause the sound. The hinge screw adjustment is not reasonable, and the hinge plug does not have the same centerline.
The hinge is fixed and the screws are not tightened, and the hinge is offset under the action of force during the use of the door, and the shaft is different.
Solution: Adjust the hinge screws so that the hinge plugs are on the same centerline. Introduce liquid grease or butter on the hinge pins. Do not use oil-free or vegetable oils.
-
Anonymous users2024-02-11Other solutions are that the wall can be caulked, the wall can be treated, the door frame can be treated, and the door frame can be directly customized, all of which can solve the problem of large gaps.
-
Anonymous users2024-02-10Yes, there are many solutions, you must understand the technology in this area, and then understand the situation of decoration.
-
Anonymous users2024-02-09You can use cement grout, you can use foam glue to fill, such a method is very common, and the cost is relatively small.
-
Anonymous users2024-02-08Gaps can affect the appearance, so it's necessary to deal with gaps:
One. If the size of the gap is more than 5 cm, a wall needs to be built.
2。The size of the gap is within 5cm, which belongs to the non-standard custom door. Grouting can be used. That is to say, the joints are filled with cement mortar, and the gaps are relatively strong.
Three. The gap is within 5cm, which is a standard door. It can be used to make foam glue and foam glue to fill the board. This is a material specifically designed to fill door cracks that can burst the door frame or avoid short-term deformation.
-
Anonymous users2024-02-07Summary. 1. If the size of the gap is more than 5cm, you need to build a wall.
2. If the size of the gap is within 5cm, it is a non-standard custom door. The method of grouting can be employed. That is, cement mortar is poured into the gaps and the gaps are filled, which is relatively strong.
3. If the size of the gap is within 5cm, it belongs to the standard door. You can play foam glue and blow styrofoam to fill the filler, which is a material specially used to fill the gaps in the door, so as to avoid the door frame bursting or deformation in the short term.
After the security door is installed, how to deal with the large gap between the door frame and the wall.
1. If the size of the gap is more than 5cm, you need to build a wall. 2. If the size of the gap is within 5cm, it is a non-standard custom door. The method of grouting can be employed.
That is, cement mortar is poured into the gaps and the gaps are filled, which is relatively strong. 3. If the size of the gap cover is within 5cm, it belongs to the standard door. You can play foam glue, blow foam glue to fill the fill, and open the barrier This is a material specially used to fill the gap in the door, so as to avoid the door frame bursting or deformation in the short term.
Than the heart] [than the heart].
-
Anonymous users2024-02-06It depends on how big your copy is, if it is within 5cm, you can grout, if it is more than 5cm, it is best to build a wall. However, I mean non-standard custom doors, standard doors, many manufacturers do not allow grouting, only let foam glue, so as to avoid door frame bursting or short-term deformation. Hope to adopt...
-
Anonymous users2024-02-051.If the size of the gap is less than 5 cm, you can use the grouting method.
bai2.If it is super.
Du over 5cm, it is a non-standard custom door zha is best in the wall.
If the DAO is a standard door, try not to grout, and use foam glue, so as to avoid the door frame bursting or deformation in the short term.
-
Anonymous users2024-02-041. First of all: the normal purchase of anti-theft doors are purchased according to the size of your door opening, the gap will not be too large, and one side of 1-2 cm is a version of the normal, which is for the convenience of installation.
2. There are two ways to deal with gaps:
a, grouting, that is, with cement into the gap, fill the gap, so that it is stronger, after the dismantling is not good b, blowing styrofoam to fill, this is specially used to fill the door gap of a material, the market is sold.
-
Anonymous users2024-02-03Styrofoam? It's better not to cover the door.
-
Anonymous users2024-02-02After the security door is installed, how to deal with the large gap between the door frame and the wall.
Hello, dear, it depends on how big you are at the bottom of the shed, if it is within 5cm, you can grout, if it is more than 5cm, it is best to build the wall. However, I mean non-standard custom doors, standard doors, many manufacturers are not allowed to grout, only let foam glue, so that you can dig to avoid the door frame bursting nuclear crack or short-term deformation, and point gypsum mortar caulking can be less than 2 cm of gap with styrofoam, greater than 2 cm with cement blocking, provided that the door frame and the wall must be firm, should be the door hole is large to cause the door frame and the wall to have a gap, need to be repaired immediately and with high-grade cement.
-
Anonymous users2024-02-01Summary. After the installation of the security door, there is a gap between the outer door frame and the wall because the security door is not measured accurately during installation, and the solution is as follows.
After the security door is installed, there is a gap between the outer door frame and the wall.
After the installation of the security door, there is a gap between the outer door frame and the wall because the security door is not measured accurately during installation, and the solution is as follows.
If the size of the gap is more than 5cm, it is necessary to build a wall. 2. The size of the gap is within 5cm, and it is a non-standard customized door. The grouting method can be used.
That is to say, cement mortar is used to fill the gap and fill the leakage, which is relatively early and strong. 3. The size of the gap is within 5cm, which is a standard door. It can be filled with foam glue or styrofoam without ethylene.
This is a material specifically designed to fill gaps in doors to prevent the door frame from bursting or deforming in a short period of time.
3 The above introduction is how to repair the gap between the anti-theft door frame and the wall, and you need to combine the gap between your anti-theft door or the gap, and then choose the corresponding repair method.
Is there anything else you need help with?
Is there a gap between the edge of the door sleeve and the wall, and the wall is uneven?
Take a look at the water level.
Check whether the door is aligned or not, and then measure whether the door is the same width up and down.
Check out the cause of the gap.
The upper and lower seams are the same width.
That is when the measurement is made wrong when customizing the door.
Based on what you have been sent above, you measure the size of the gap and make a treatment that suits you.
If the horizontal plane of the wall is detected, it is uneven.
The walls need to be masonry.
If the gap is not large, it is recommended to use foam glue.
Many anti-theft door consumers said that the anti-theft door market is chaotic, they are difficult to choose, today, the door to the door network ** anti-theft door purchase points! In recent years, the name of the anti-theft door market product name is confused, the standard is not uniform, in order to escape the inspection of the quality inspection department, the name of the anti-theft door becomes a steel door, a metal door, a standard door, etc., in addition to the confusion of the door name, the quality of the anti-theft door is uneven. The thickness of the steel plate of some anti-theft doors is not up to standard, and it can be opened in tens of seconds; There are also some anti-theft doors that are not anti-theft locks at all, but ordinary locks; The most serious problem is that some security doors have neither a factory name nor a factory address, and they are labeled with other products after they are done, and then sold at an ultra-low price. >>>More
The gap adjustment hinge for the gap adjustment of the door crack of the security door. >>>More
My home is installed with Panpan security door, which has been used for more than a year and has not had any quality problems. And before I bought Panpan security door, I also did some homework, now I can combine the actual use, to tell you about my feelings, I personally feel that the quality of the security door can be considered from the safety level, sound insulation and thermal insulation effect, whether the filling material is environmentally friendly, etc., others such as appearance design, pre-sales and after-sales service, if done well, it is naturally more divided. >>>More
That was when the door was installed, and there was no shaking feeling after closing it. So let's find a professional to take a look, but it's by no means a big problem.
Steel, stainless steel, steel, copper, or other composite materials.