How to adjust the gap of the anti theft door, how to adjust the gap between the anti theft door

The gap adjustment hinge for the gap adjustment of the door crack of the security door.

The five small screws of the hinge are basically loosened, and then turn the eccentric screws in the middle, and turn to the gap that you think is appropriate, if you feel that the gap between them is not enough, stuff something between the door panel and the door frame, adjust it and then pull it out after it is healed, try a few more times to adjust it, and finally tighten all the screws.

Paste the tops.

Find the gap between the safety door and the door frame and measure the size of the gap to provide data basis for purchasing the right adhesive tops.

The standard stipulates that the gap between the door leaf and the hinge side of the door frame should not be greater than 2mm, and the gap between the opening edge of the door and the door frame in the closed state should not be greater than 3mm, then the width of the general anti-theft door frame minus the width of the door leaf should not be greater than 2 + 3 = 5mm, and the width of the door frame of the mother-child anti-theft door minus the width of the mother door leaf and the width of the sub-door leaf should not be greater than 2 + 3 + 7mm.

1.The gap between the door gap of the anti-theft door is: the standard stipulates that "the gap between the door leaf and the hinge edge of the door frame should not be greater than 2mm, and the gap between the opening edge of the door and the door frame should not be greater than 3mm."

Then: the width of the general anti-theft door frame minus the width of the door leaf should not be greater than 2 3 5mmThe width of the door frame of the mother-child anti-theft door minus the width of the mother door leaf and the width of the child door leaf should not be greater than 2 3 7mm

2.The actual data measured by the installers of the manufacturer is: the width of the door frame is 1066mm, the width of the mother door leaf (748) and the width of the sub-door leaf (300) is 1048mm.

The width of the door frame of the mother-child security door minus the width of the mother door leaf and the width of the child door leaf is 1066 1048 18mm, and the actual clearance is larger than the gap specified in the standard: (18 7) 7 = 157.

What exactly is the problem of a lock or a seal?

The specific operation method of the anti-theft door adjustment door gap is as follows:

Tools required: Tape measure, sticky tops.

1 First of all, find the door gap and measure the size of the door seam: Find the gap between the safety door and the door frame, and measure the size of the gap to provide a data basis for purchasing a suitable adhesive top.

2 Then, choose the correct size of the sticky tops: Choose the correct sticky tops according to the size of the gap.

3 Wipe the part of the top paste: Use a clean towel to wipe the part of the top paste, especially do not leave dust and moisture, otherwise it will affect the paste effect.

4 Paste the top: Glue the prepared top to the cleaned part. At this time, do not use too much air pressure to avoid difficult correction in case of improper pasting.

5 Close the safety door inspection: Close the safety door after the pasting is completed to check the paste effect, correct the inappropriate parts, and press after passing the inspection.

6 Finally, the adjustment is complete: close the entire security door for viewing. At this point, all the gaps are sealed, which can effectively block the wind and sound.

1. Adjust the hinge first, if there is a large gap between the door frame and the door, you can try to adjust the hinge first. By adjusting a few screws on the hinge and loosening them a little, the middle of the screw can be adjusted, and the split skin makes it tighter. Then, look again to see if the gaps between them have been adjusted in place and whether they have been narrowed a bit.

2. Measure the gap If the gap is still relatively large, measure the gap between them through a tape measure, the main purpose is to find a way to stuff something into the gap to solve the sealing problem. Depending on the size of the gap, choose the right sticky tops. 3. To install the wool strip to the appropriate size, it is also necessary to wipe the perimeter between the gaps, and there can be no dust or moisture, otherwise it will affect the fighting effect of the paste.

By correcting the hinges and adjusting the compression, the gaps can be sealed and the wind can be well blocked from entering the room. Hope it helps.

Excessive or uneven clearances in the door gaps of security doors not only affect the aesthetics, but also reduce security. Here's how to adjust the gap between the door gaps of the security door::

1.Adjust the door leaf: Check whether the door leaf is firmly installed on the door frame, if it is loose, you can use a screwdriver to fix it.

If the original position of the door leaf is offset, you can adjust it with a tool to make the door leaf horizontal and vertical on the door frame, so that the door gap between the round mountains can be adjusted.

2.Adjust the door frame: If the door frame is not right, you can use a wooden spacer to adjust it, insert the spacer into the center of the door seam, and then use ink or frame lines to determine the position of the door frame, add or remove the spacer as needed.

If the door frame is seriously deformed, the door frame needs to be disassembled and reassembled or replaced.

3.Add sealing strips: Installing rubber strips on the door seams can reduce the size of the door cracks, and at the same time can also play the role of sound insulation, heat preservation and waterproofing.

If you don't have the relevant skills and tools, it's best to hire a professional to install and maintain the security door for you to ensure the safety and longevity of the door.

The method of adjusting the gap between the door gaps of the security door is as follows:

1.Check the door frame: First, check that the door frame is firm and not loose or damaged. If there is a problem with the door frame, it needs to be repaired or replaced.

2.Adjust the position of the door frame: If the gap between the door gaps is too large or uneven, you can try adjusting the position of the door frame. Use a screwdriver or wrench to loosen the door frame screws, adjust the position of the door frame slightly, and retighten the screws so that the door frame is perpendicular to the wall and the gap is even.

3.Adjust the position of the door leaf: If the gap between the door is too large or uneven and caused by the door leaf itself, you can try to adjust the position of the door leaf.

Use a screwdriver or wrench to loosen the adjusting screws on the door leaf, adjust the position of the door leaf slightly, and then retighten the screws so that the door leaf is perpendicular to the door frame and the gap is even.

4.Add sealing strips: If the gap between the door gaps cannot be adjusted to an ideal state by the above square stove method, you can consider adding sealing strips to fill the gaps.

Select the appropriate door and window sealing strip, and install the sealing strip between the door leaf and the door frame according to the instructions of the manual, so as to reduce the gap between the door gap and improve the sealing performance.

Please note that for the adjustment and installation of the security door, it is recommended to consult a professional installer or door and window company to ensure that the adjustment process is correct and safe. At the same time, ensure that the opening and closing of the door is not affected after the door gap is adjusted, and the normal function of the door lock and door handle is maintained.

The adjustment method of the gap between the door gaps of the security door is as follows:

Adjust the door frame: If the gap between the door gaps is large, you can try adjusting the position of the door frame. Use wood chips or corks to fill the gap between the door frame and the wall, or use screws to fix the door frame to make the door frame fit more closely with the wall.

Adjust the door leaf: If the gap between the door gaps is large, you can try adjusting the position of the door leaf. Use screws to secure the door leaf, or use wood chips or corks to fill the gap between the door leaf and the door frame to make the door leaf fit more closely.

Replace the seals: If there is a large gap between the door gaps, you can try replacing the seals on the door leaf and door frame. Select the appropriate sealing strip and replace it according to the method in the manual to ensure that the sealing strip fits more closely with the door seepage fan and door frame.

Adjust the door lock: If the gap between the door gaps is large, you can try adjusting the position of the door lock. Use screws to secure the latch, or adjust the position of the latch to fit the frame more closely.

It should be noted that when adjusting the gap between the door gaps of the anti-theft door, it is necessary to pay attention to safety and avoid damaging the door leaf and door frame. If you can't solve the problem yourself, it is recommended to seek help from a professional door and window repairer.

1.Adjust the door frame: If the door frame is uneven, you can use wood chips or plastic spacers to fill the gap between the door frame and the wall to make the door frame flat.

2.Adjust the door leaf: If the door leaf is uneven and bent, you can use the adjustment screw to adjust the position of the door leaf to make the gap between the door leaf and the door frame even.

3.Replace the sealing strip: If the gap between the door leaf and the door frame is large, you can replace the sealing strip, choose the sealing strip chain suitable for the cracked door and install it on the door leaf.

4.Adjust the door lock: If the door lock is uneven, you can use the adjustment screw to adjust the position of the door lock to make the gap between the door lock and the door frame even.

5.Replace the door leaf: If the door leaf has aged or damaged, you can replace the door leaf, choose a suitable door leaf, and install it on the door frame.

The gap between the door cracks of the security door is controlled by adjusting the distance of the door hinges when installing the door hinges.

The method of adjusting the door gap of the anti-theft door is as follows:

1. Find the door crack and measure the size of the door seam: find the gap between the safety door and the door frame, and measure the gap size, so as to provide data basis for the selection of suitable adhesive wool tops.

2. Choose the right size of sticky tops: choose the right sticky tops according to the size of the gap.

3. Wipe the sticking part of the wool top: use a clean towel to wipe the part of the sticking hair strip clean, especially do not leave dust and moisture, otherwise it will affect the paste effect.

4. Paste the wool tops: paste the prepared wool tops on the wiped clean parts, do not use too much force to compaction at this time, so as to avoid it is not easy to correct when the paste is not suitable.

5. Close the safety door for inspection: close the safety door after the paste is completed to test the paste effect, correct the inappropriate parts, and compact after passing the inspection.

6. Adjustment completed: close the entire safety door to view, at this time all the gaps have been sealed, which can play a good role in the effect of wind and sound resistance.

The adjustment method to answer the gap between the door cracks of the anti-theft door is: 1. Find the door crack and measure the size of the door seam, measure the size of the door crack first and then select the appropriate wool top; 2. Wipe the wool strips and wipe them clean with a towel; 3. Install the sticky tops, clean the installation parts of the tops and then install them; Fourth, close the anti-theft door inspection, close the anti-theft door, adjust the inspection wool top.

1. Find the door crack and measure the size of the door crack.

If you want to adjust the gap between the door gap of the security door, you must first find the gap between the door frame and the door of the security door, measure the size of the gap, and then buy a sticky wool top with the appropriate length and thickness. When choosing wool tops, we are also very particular, ordinary wool tops are not very dust-proof, and they are easy to weathering and become powder after a long time. The siliconized tops are not easy to absorb water, which is equivalent to a protective layer, and this type of tops is very waterproof and sealed.

2. Wipe the wool strips.

Before installing the wool tops, wipe the wool tops with a clean towel, and do not let the wool tops have dust or water vapor on them, otherwise the sticking effect of the wool tops will be affected. Sticky wool tops should not be exposed to the sun, otherwise they are easy to harden and affect the installation effect.

3. Install adhesive wool tops.

Before preparing to install the tops, clean the parts where the tops are to be installed, and then paste the tops to the cleaned area. When installing the tops, do not use too much air pressure. It is difficult to adjust to prevent poor pasting.

When installing the wool top, the edge of the wool strip should be aligned with the seam of the anti-theft door, and try to make the wool strip paste in place at one time.

4. Close the security door for inspection.

After pasting the wool top, check the paste effect, close the anti-theft door, check whether the wool top paste is smooth and fit, and the wool top can be adjusted in time. After all the inspections and adjustments are made, press the wool tops tightly. After adjusting the door crack of the security door, the door crack of the security door can be sealed, which can play a good role in wind protection and sound insulation.

Precautions for installing security doors.

1. When choosing an anti-theft door, it is necessary to choose safe, green and environmentally friendly materials, which can not bring harm to people's bodies. After picking the style of the security door, it is necessary to check whether the surface of the security door sent by the merchant is complete, whether the parts are complete, and if there is damage, it should be repaired or replaced in time.

2. After choosing the security door, you should choose the installation time. When most families are decorating, they will choose to install the security door in the last step of the decoration, which will actually be more troublesome. It is best to go and decorate the security door before the bricklayer renovates.

Because in the process of installing the security door, the wall may be damaged, and if there is a bricklayer, the bricklayer can repair it in time.

3. When installing the anti-theft door, you must ensure that the size of the door is consistent with the size of the door opening. If the dimensions are inconsistent, the wall should be chiseled or repaired in time. If the security door and the door opening do not match, even if it is installed, it is prone to safety hazards and damage.

4. After installing the anti-theft door, be sure to check whether the anti-theft door is stable. You can use expansion bolts to secure the door frame and wall of the security door.

5. When using the anti-theft door, check whether the anti-theft door can be easily opened or closed, and check whether the other accessories are complete. If there is a problem, it should be done to the merchant on the spot.

The gap adjustment of the door gap of the anti-theft door is adjusted with the hinge, the five small screws of the hinge are basically loosened, and then turn the eccentric screw in the middle, turn to the gap that you think is appropriate, if you feel that the gap between the door is not enough, stuff something between the door panel and the door frame, adjust the good and then pull the thing out, try a few more times to adjust it, and finally tighten the screws.