-
In my experience: ** useBaking soda + toothpaste + dish soapSoak and clean it can be easily cleaned, and there is no damage to **, and, I have personally tried many times, simple and convenient, we take **necklace as an example to make a **Ming:
First things first:We prepare a container, pour warm water into the container, squeeze a small piece of toothpaste into the water, <>
Pour in the right amount of baking soda, (depending on the degree of spoil).
Squeeze in another drop of dish soap, and if it's dirty, squeeze in a few more drops.
And then:We then use the used soft-bristled toothbrush at home to stir well to completely dissolve the solution.
And finally:After the solution is dissolved, we put the necklace in water and soak it for about ten minutes to soak and soften the stains on the necklace, which is more conducive to cleaning and can also avoid hard brushing. After 10 minutes, we will scrub again
The fine bristles of the toothbrush can scrub every crevice on the necklace, so that the stains on the crevices of the necklace can be easily cleaned.
Cleaning principle:Because baking soda has a strong stain removal effect, toothpaste and dish soap can make jewelry shine brighterBaking soda + toothpaste + dish soapIt can be a good cleaning ** jewelry.
Look at the water from the necklace has become dirty. Then, we prepare water and wash the necklace in clean water and it's done.
This method is simple and effectiveThe cleaning materials are commonly used at home, is the washed **necklace as bright as the newly bought? After we learn this method, we don't have to go to the gold shop to clean it, it's very simple, and interested friends can try it.
-
1. Toothpaste cleaning.
In fact, there are many ways to clean jewelry, and the simplest one is to clean it with toothpaste. Toothpaste can not only make our teeth white, but also make the **jewelry look new, you can wet the **jewelry slightly, then apply the toothpaste, and then gently scrub with a soft cloth, then rinse it clean and wipe dry. However, when cleaning ** jewelry, pay attention to the use of toothpaste without frosting effect, otherwise long-term cleaning will cause losses to gold jewelry.
2. Ammonia cleaning.
You can also use ammonia to clean ** jewelry, the effect is still very good, and it is easy to use. But this dosage is not too large, take a bottle of water, then drop a few drops of ammonia, and then put the ** jewelry in it to clean, shake it a few times and take it out to dry it with a soft cloth, this cleaning method can wash the ** very bright.
3. Professional cleaning.
If there is a layer of black film on the surface of the jewelry, you should use a professional metal cleaning solution, you can use 2 grams of salt, 7 grams of baking soda, 8 grams of bleaching powder, 60 ml of water, mix together, put the gold jewelry in the cleaning agent, 1-2 hours, and then take it out and rinse it with water, you can wash the jewelry clean and bright.
How to clean ** jewelry convenient, the above are several more convenient ** jewelry cleaning methods, if you still feel troublesome, you can directly take it to the gold jewelry cleaning shop, let the clerk carry out professional cleaning.
-
Toothpaste cleaning. Everyone uses toothpaste every day, but I didn't expect that toothpaste can not only clean teeth, but also clean ** jewelry. In fact, the ingredients contained in toothpaste can also achieve a cleaning effect on things such as jewelry, which can restore the luster of jewelry.
Specifically, you can use a smaller toothbrush, dip a little toothpaste, brush ** jewelry, and then clean it. It should be noted that the toothbrush should use soft bristles, too hard will cause damage to ** jewelry. But if there are small corners that have not been cleaned, you can use a toothpick to pick them up to achieve a clean effect.
Don't think that you should wash almost, don't wash it, if it is not cleaned, the dirt will always remain in the jewelry, and in the long run, the jewelry will become more and more dirty, and the original dirt is not clean, and there will be new dirt.
Specialist cleaner.
If you are not sure about some cleaning products, you can use professional detergents to clean them. Often, the cleaning power of this professional detergent is also relatively large, so you can clean with confidence, and most of the dirt can be cleaned.
Specifically, you can take a bowl of water, then squeeze the detergent into a little, and then put the **jewelry in it to soak for a few minutes, and after a few minutes, take out the **jewelry and gently brush it with a soft-bristled toothbrush, and finally wipe it clean with a clean towel, and the **jewelry can also restore its luster.
It should be noted that you can't soak it for too long with this professional cleaner, and soaking it for too long will damage the ** jewelry to a certain extent.
-
1.Brush with toothpaste. Take a small amount of toothpaste with a soft-bristled toothbrush, gently brush it on the surface, then wash it with water, and then use a cotton cloth to absorb the moisture on the surface.
2.Wipe with toilet water. A cotton swab is dipped in a small amount of toilet water, gently wiped on the surface, rinsed with water and then dried.
3.Soak in rice water. **Soak in rice washing water for one hour.
4.Cleaning by professional institutions. Send the ** to a professional institution for cleaning, so that the damage caused to the ** is small.
-
1. To protect the shine of ** jewelry, you can apply a thin layer of transparent nail polish on it.
2. You can make your own cleaning agent with salt and vinegar and use it to scrub pure gold jewelry. But it's always new.
3. Scrubbing with toothpaste or rubbing with piping hot thick rice soup can also restore the luster.
4. If there is a black silver film on the jewelry, you can prepare your own cleaning agent; 2 grams of salt, 7 grams of baking soda, bleaching powder.
8 grams, 60 ml of water to prepare the cleaning agent, put the jewelry into a bowl and pour the cleaning agent, two hours after the gold head.
Take out the ornament and wash it with water [preferably with purified water], then wrap it in a soft cloth and wipe it clean.
-
You can wash it with dish soap, if you feel that if you don't feel it, if you don't think it's clean, you can also let the place that sells ** help you clean it, but I think it's better to clean it at home, because he will steal your gold if you wash it today, and you can wash it with laundry detergent at home, it's already very clean.
-
If you clean it at home, use a little toothpaste, and use a toothbrush dipped in toothpaste to gently brush on it, and you can clean it.
-
The ** jewelry you usually wear can be cleaned with neutral dish soap when cleaning at home, and then with a small brush.
-
The jewelry we bring with us can generally be washed with toothpaste to make it look brighter.
-
1. Toothpaste can make our teeth white, and it can also make **jewelry shine as new, and toothpaste can remove dirt on the surface of **jewelry. But this method is not very good, because the toothpaste contains abrasive particles, if you often use toothpaste to clean the ** jewelry will reduce the weight of the gold jewelry, causing unnecessary losses;
2. Ammonia has a very effective effect on the cleaning of the surface, and the method of helping ammonia water cleaning is also very simple, first take a bottle and add pure water to it, then drop a few drops of ammonia into it, and finally put in the jewelry, shake it vigorously and then take out the gold jewelry and wipe it dry with a soft cloth.
3. First take 1000 ml of warm boiled water, then add 200 ml of glacial acetic acid to make an aqueous solution, then put ** jewelry into the made aqueous solution and soak it for 10 minutes, then gently brush it with a soft brush dipped in hot water, and finally rinse it with water. It is best to use a cotton ball dipped in soapy water and anhydrous alcohol to scrub, so that the cleaned ** jewelry will become gorgeous.
-
Hello, there are some of the following ways to clean ** jewelry, you can refer to it 1, toothpaste cleaning yourself to clean ** jewelry can be wiped with toothpaste, take a small brush or soft cloth, and then take an appropriate amount of toothpaste squeezed on the soft cloth on the small brush, evenly wipe and smear ** jewelry, and then rinse it with water, and finally wipe it clean with a cloth. However, it should be noted that you should not choose a toothpaste with many particles or a particularly exaggerated whiteness for cleaning. 2. If there are small black spots in the gold cleaner, you can buy a special gold cleaner to clean it, pour out some gold cleaner, and then soak the jewelry for a while, and then gently brush back and forth with a small brush to wipe off the black spots.
Then rinse with clean water. Note that if you use gold cleaner for the first time, you can look at the instructions to know the approximate dosage, and you must not soak it for too long, otherwise it will easily lead to secondary damage to ** jewelry. 3. Ultrasonic instruments can buy ultrasonic cleaning instruments, put the best jewelry into the ultrasonic cleaning instrument, and the ultrasonic waves will send out a specific frequency, and clean the whole body of the ** jewelry in all directions, and this method is also particularly time-saving, no need to do it yourself.
4. Jewelry repair shop cleaningIf you are afraid of causing secondary damage to the jewelry by yourself, you can send the jewelry to the jewelry maintenance shop for cleaning, and the special personnel will clean it, which can be cleaned more cleanly. Summary: The above methods have do-it-yourself cleaning, there are machines to help you clean, there are special cleaning personnel to help you clean, if you are worried about your own cleaning to cause wear or damage to the ** jewelry, you can send it to a special institution for jewelry cleaning, you can refer to it.
-
Toilet water. Toilet water can also be used to clean**, drop a drop of toilet water on the **, and then scrub it clean.
Rice water. You can also use rice washing water to clean**, first soak ** in rice washing water for a while, and then wash it clean.
Toothpaste. Toothpaste can also clean up the dirt on the surface, so you can apply a little toothpaste on it, then gently scrub it, and finally rinse it off with water.
Nail polish. Nail polish can be maintained, and nail polish can be applied to it, so that it is equivalent to a protective layer.
-
**Use a toothbrush to dip a little toothpaste, the more you brush, the brighter it gets. You can also use a soft cloth dipped in a little toothpaste to wipe the surface, which can effectively remove the surface dirt, and the more you wipe, the brighter it will be.
-
**It is a soft metal that is malleable and easy to clean. Because the chemical properties of ** are relatively stable, it is easy to deal with, the pure ** is red in the state of high temperature, the gold content is relatively small is gray, just gotten **has not been processed, can be used to melt to process decorations, why is the number of ** relatively rare? Because ** in the process of formation.
There are no other factors mixed together, and it is more useful in life.
It is soft because of its nature and is simple to clean. Use a toothbrush to dip a small amount of toothpaste, gently brush off the impurities on it, and finally melt it off, refine it to a purer one, and then brush it with a toothbrush after it is finished, so that the cleaning will become brighter.
-
Clean**.
Step Method.
To protect the shine of ** jewelry, you can apply a thin layer of nail polish on top.
Please click Enter a description.
If there is a black silver film on the surface, it can be prepared with 2 grams of salt, 7 grams of baking soda, 8 grams of bleaching powder, and 60 ml of water"Gold cleaner"After 2 hours, take out the gold jewelry, rinse it with clean water (preferably not hard water), bury it in wood chips to dry, and then wipe it with a soft cloth.
Please click Enter a description.
Gem-set rings are made with a popsicle or matchstick rolled in a piece of cotton, moistened in a mixture of toilet water and glycerin, the gemstone is scrubbed on its frame, and then the ring is polished with a flannel cloth.
Please click Enter a description.
Salt and vinegar are mixed into a cleaning agent that can be used to wipe down pure gold jewellery and keep it looking new.
Please click Enter a description.
Rubbing with toothpaste or scrubbing with piping hot, thick rice soup can also restore shine.
Please click Enter a description.
Web Links.
The most convenient way is to have tea stains.
Immerse the cup in water for 2 minutes, then take it out, dip some toothpaste with a toothbrush, evenly apply the toothpaste to the place with tea stains, and then wipe it repeatedly for about 3 minutes. >>>More
To clean the keyboard, you can open the keyboard by disassembling all the screws at the bottom of the keyboard. (Some keyboards hide a few screws underneath the keys.) The purpose is to make the keyboard and conductive rubber contact better). >>>More
Three tricks to wash the peach hair! With these three tricks, foodie babies with peach hair allergies can eat crookedly.
At present, the main methods of tattoo washing are laser tattoo washing, as well as the ** grinding method, but compared with each other, the effect of laser tattoo washing is even better! Compared to laser tattoo removal, grinding is a more traditional method. It is suitable for removing shallow tattoo patterns, and there may be ** pigmentation or loss of pigment after tattoo washing; Removal of scars left when it is too deep, and it is difficult to completely remove dark pigments. >>>More
1. Apply a wet towel soaked in hot water to your face. Be sure to wash your face with hot water when washing your face for the first time, which can open the pores and make it easier to clean. >>>More