-
Longevity flowers can bask in the sun, the plant belongs to short-day plants, if the longevity flower provides eight to nine hours of sunlight for four consecutive weeks, it can make the plant bloom in advance, in addition, the longevity flower is native to Madagascar, Africa, likes a warm and humid environment, does not tolerate severe cold and heat, and can be used to prepare the soil with humus, garden soil, sandy soil, etc.
-
Kalancho flowers need to be exposed to the sun, and if they grow in a location with poor light for a long time, their growth will be hindered. It should receive a few hours of light every day, and it can only grow vigorously if the sun is sufficient, but it cannot accept the strong light in summer, and it needs to be properly shaded after summer.
-
Longevity flowers can bask in the sun, but the temperature is high in summer, see the sun time should be short, can not be exposed to the scorching sun, is also semi-dormant, the damage to the flowers is great, autumn is coming, longevity flowers are managed in place to grow vigorously, flowers and branches.
-
Longevity flowers are one of the easier flowers and plants to raise. Illumination: Scattered light can be used, full sun in winter, and about 50% shade in summer.
If the light is too shady, it will grow and seriously affect the beauty of the plant. Watering: It can be carried out alternately between dry and wet, although the amount of transpiration is large in summer, but under the condition that the temperature is higher than 32, the plant enters a semi-dormant state, and watering needs to be controlled.
Fertilization: Be sure to apply thin fertilizer frequently, otherwise the thick fertilizer is easy to burn the root system and cause the plant to die. It is advisable to suspend fertilization during the high temperature period in summer.
In autumn, water and fertilizer management should be strengthened, and sufficient light should be given to facilitate the differentiation of flower buds, and a low temperature of 10-12 should be maintained at the beginning of winter, and the temperature should gradually rise after 3-4 weeks to flower.
-
Hello, dear, longevity flowers can bask in the sun, the plant belongs to short-day plants, if four consecutive weeks to provide eight to nine hours of sunlight for longevity flowers, can make the plant bloom in advance, in addition to longevity flowers native to Madagascar, Africa, like a warm and humid environment, not tolerant to severe cold and heat, maintenance can be used humus, garden soil, sand and other mixed soil, pay attention to the soil to be disinfected before use.
-
After the longevity flower seedlings are repotted,As long as you take a basin, you can bask in the sun. It usually takes about a week.
Kalancho is a short-day plant that prefers sunny, well-ventilated environments, but it can also tolerate semi-shade. The reason why it is not recommended to bask in the sun immediately after changing the pot is mainly because the potted plants need to go through a potting period after changing the pot, and its root system can not transport water and nutrients normally before the potting, and the leaves will be dehydrated and wilted in the sun.
The correct approach is to astigmatism for about a week, and then gradually increase the lightAfter the leaves re-green, normal management is resumed.
There are these precautions for repotting longevity flowers:
1. The best time to change pots for longevity flowers is generally after the end of the spring flowering period, that is, around April, because longevity flowers have the characteristics of short dormancy during high temperature in summer and intolerant to severe cold in winter, and autumn is the flower bud differentiation and budding period of longevity flowers, so spring repotting is the best.
2. Longevity flowers do not like stagnant water, even if the pot is changed, it is not advisable to use too large and too deep pots, according to the size of the crown to choose the appropriate size, good air permeability and with a bottom hole of the pot is the best.
3. Before potting, a layer of ceramsite or briquettes can be laid at the bottom of the pot, which can prevent water accumulation and increase the air permeability of the root system.
4. Longevity flowers have a long flowering period and belong to diligent flowering plants, and some organic fertilizers, slow-release fertilizers and other bottom fertilizers can be added in an appropriate amount before potting, which can promote their vigorous growth and early flowering.
The longevity flower is rich in varieties, a wide variety of flower colors, and can be propagated by cuttings by itself, which can be said to be easy to raise and down-to-earth. In addition to the normal basic maintenance, the pruning of longevity flowers is also very important, as long as it is pruned at the right time, it can make longevity flowers grow vigorously.
-
Longevity flowers can bask in the sun when they bloom, and they must also bask in the sun, so that the light can bloom better, so as to promote the flower color to be more gorgeous and the flowering period to be longer.
If you don't bask in the sun for a long time, it will affect flowering and cause the color of the flowers to fade. However, it is necessary to pay attention not to expose to the sun, not to put it in strong light for a long time, it is best to place it in a place of astigmatism, too strong light will lead to a shortened flowering period. In addition, if you want to have a longer flowering period, you should also pay attention to the nutrients to ensure that the nutrients are sufficient.
When basking in the sun for longevity flowers, you can not just put them directly in the sun, you can move them to dry, but it takes time. Although the longevity flower prefers a warm, slightly moist and sunny environment, it is a short-day plant that cannot be exposed to sunlight for a long time, and can grow well under both half-day and scattered light conditions.
If the plant grows well and develops after short-day treatment, that is, 8-9 hours of light per day, and shading treatment for the rest of the time, flower buds can be formed in about 25 days.
In June and July, you need to pay attention to the following 2 points to maintain longevity flowers:
1. Watering should be appropriate.
If the temperature of longevity peanuts is too high, while shading, it is necessary to reduce watering appropriately, you can pull the pot soil, if the surface of the pot soil is about 2 cm of soil is dry, then you can water, when watering, along the edge of the pot, small water is poured slowly, watered thoroughly, can not accumulate water, if it is water, then it is very perishable in a high temperature environment.
2. Stop fertilizing.
Longevity flowers are dormant and have almost zero need for nutrients, so fertilization should be stopped. After the weather is cool, generally at the end of August and the beginning of September, it is necessary to slowly resume watering and fertilization, so that the maintenance can make the longevity flowers quickly resume growth in autumn, and bloom more in the flowering period.
-
Longevity flowers can bask in the sun, it is a sun-loving plant, enough light can better bloom, can promote the flower color is more gorgeous, the flowering period is longer, if you do not bask in the sun for a long time, it will affect the flowering, resulting in the color of the flowers becoming lighter, you have to receive an hour of light every day, you can avoid exposure in summer, place it in a scattered light, and rotate the pot at the same time, so that the longevity flowers receive light evenly.
Longevity flowers can bask in the sun, it is a sun-loving plant, enough light can bloom better, can promote more colorful flowers, longer flowering period. If you do not bask in the sun for a long time, it will affect flowering and cause the color of the flowers to fade, so receiving a few hours of light a day can promote the growth and flowering of the plant.
Longevity flowers grow in light.
1. Longevity flowers are afraid of sun exposure, can not be placed in strong light for a long time, it is best to place them in a well-ventilated astigmatism place, and at the same time rotate the flower pot to let the longevity flowers receive light evenly, too strong light will lead to shortening of the flowering period, and the leaves will also become wilted, affecting the overall ornamentality.
2. In addition to the need for shade in summer, longevity flowers can receive sufficient light in the other three seasons, especially in spring and autumn its growth is vigorous, only when the sun is sufficient, it can grow robustly, and the temperature in winter is low, and it can be moved to a place with high light intensity in the room for maintenance.
What to do if the longevity flower is wilted.
In the environment of high light intensity, the leaves of longevity flowers are easy to wilt, so Cha Kuanbi needs to move to a cool place indoors for maintenance at this time to ensure good ventilation and appropriate watering to maintain the moisture of the soil. If there are yellow leaves and dead leaves, they can be pruned off to reduce nutrient consumption, and growth can be resumed after a period of time.
-
Kalancho flowers can bask in the sun.
Kalancho is a plant that mainly looks at flowers. Of course, the leaves are also very thick. It belongs to the sedum family succulents and prefers plenty of light.
Long-lived flowers that have been placed in a cool place for a long time. The blades are small. The plant is not compact.
Little or no flowering. But I divide the sun to a longevity flower.
Longevity flowers can bask in the sun, the plant belongs to short-day plants, if four consecutive weeks to provide eight to nine hours of sunlight for longevity flowers, can make the plant bloom in advance, in addition to longevity flowers native to Africa motor plus broken plus, like a warm and humid environment, not tolerant to cold and heat, maintenance can be used humus, garden soil, sand and other mixed preparation of soil, pay attention to the soil to disinfect and then use nuclear elimination.
Growth habits of longevity flowers:
Longevity flowers are autumn bulbous greenhouse flowers, which have the physiological characteristics of growing in autumn and winter, flowering in early spring, and dormant in summer. Longevity flowers like light, water, fertilizer, suitable for warm, humid climatic conditions, like fertile sandy soil. It likes to be cool in the early stage of growth, slightly cold-tolerant in the middle stage, and warm in the later stage.
Therefore, it is required to have no severe cold in winter and no heat in summer, and rainy climate and environment in spring and autumn.
During the day, longevity flower pots should be placed in a sunny place with plenty of sunlight to give them plenty of light. Because plants need to provide nutrients through chlorophyll through photosynthesis, so that the leaves of longevity flowers can be wide and straight, the leaf color is bright green, and the flowers are fragrant. On the contrary, the leaves are tall and thin, weak, and the leaf color is yellow, or even does not bloom.
It is best to use loose and fertile alluvial sandy loam soil with deep soil layer, and it is suitable for growth when pH is even.
-
Longevity flowers can be exposed to the sun, and it is suitable to receive 8-9 hours of light every day to ensure robust growth. Cultivation method: soil selection, suitable for the use of loose, fertile and well-drained slightly acidic soil; Watering appropriately, maintain a watering frequency of 2-3 during the breeding period, and reduce the amount of watering during the dormant period; Fertilizer is applied, the frequency of fertilization can be once every 15-20 days, using diluted compound fertilizer.
Longevity flowers can bask in the sun Longevity flowers can bask in the sun, receive sufficient light every day, longevity flowers can grow robustly, suitable for 8-9 hours of light, if placed in a poor light position for a long time, the growth of longevity flowers will be hindered, resulting in poor growth and yellow leaves.
The cultivation method of longevity flowers1. Soil selection
Longevity flowers are suitable for the use of loose and fertile and well-drained slightly acidic soil, not easy to use heavy clay soil, which will lead to the root system of the plant breathing difficulties, resulting in poor growth of yellow leaves falling root rot and other phenomena, can be used 2:2:1 humus soil, garden soil and river sand to ease the configuration of soil farming.
2. Watering properly
Longevity flower is a succulent, the plant contains more water, drought tolerance is relatively strong, do not need to water too much water, maintain a watering frequency of 2-3 during the breeding period, each time the plant is watered to keep the soil slightly moist, reduce the amount of watering when the plant enters the dormant period in winter, too much water absorption will lead to root rot.
3. Fertilizer application
Longevity flowers in the vigorous growth period of the demand for nutrients is relatively large, the frequency of fertilizer can be applied for 15-20 days once, the use of diluted compound fertilizer, can promote the growth of the plant robust flowering densely, after the formation of the flower buds of the plant can be applied 1-2 times of potassium dihydrogen phosphate fertilizer, or superphosphate fertilizer, can help the growth of the number of flowers.
-
Longevity flowers can bask in the sun.
Longevity flower plant is a short-day plant, its growth and development can not be separated from sufficient sunlight, and want to bloom longevity flowers in advance, it is necessary to grow lush and robust plants, and then provide it with eight to nine hours of sunlight every day, after three to four weeks of treatment, longevity flowers can bloom in advance, and the flowers are lush and gorgeous, during the general maintenance period, the plants are placed on the sunny windowsill or balcony, to ensure that there are 4 6 hours of light every day, but when the light intensity is large, take shading measures.
Longevity flowers are native to Madagascar in Africa, so the plant prefers a warm, humid and sunny environment, it is not tolerant to severe cold and heat, and the growth temperature of longevity flowers is 12 to 15 degrees, when the winter weather is lower than 5 degrees, it needs to be moved indoors to a sunny place for maintenance.
Attention to raising longevity flowers:
1. Pay attention to the temperature.
In the process of growth, you need to pay attention to the ambient temperature, if you want to live longer and grow better, it is best to control the temperature of the environment at 15 to 25 degrees Celsius.
2. Provide moisture.
In the process of growth, the need for water is greater, and the plants can be watered every 3 or 4 days, and the soil can be kept moist when watering.
3. Provide nutrients.
Longevity flowers in the growth period, need to fertilize the plant every 15 20 days, fertilizer can be used nitrogen fertilizer, but also to the longevity flower topdressing phosphorus and potassium fertilizer, so that the plant blooms better flowers.
4. Prune.
When cultivating longevity flowers, it is necessary to prune them and cut off the branches and leaves of the plants that do not grow well, so as to help the longevity flowers save nutrients.
I think it can be done in this way, so that it can be evenly exposed to the sun's light, and photosynthesis has a great effect on its growth. But I don't think everyone has the time to sit in front of a pot of flowers every day and have the leisure to move it.
Longevity flowers belong to the sedum family, and the succulent plants of the genus Jialan, which are ornamental flowers in autumn and winter, and are also one of the New Year's flowers that have continued to be popular in recent years. With the continuous development of horticultural improvement technology, the varieties of longevity flowers are updated and iterated very quickly, according to incomplete statistics, the current longevity flowers have been known to hundreds of varieties, and their varieties are mainly distinguished by flower type, leaf shape and flower color. >>>More
Select a pot of vigorous longevity flowers, cut the top branches of the plant, ensure that each branch has at least 2 pairs of leaves, cut the upper incision flat, cut the lower incision 45° obliquely, and then remove the bottom 1 pair of leaves, and put it in a cool and ventilated place to dry the wound. >>>More
Longevity flowers can take the way of branch cuttings, and cut strong branches to dry the wound before cuttings. >>>More
Reason: It is not heat-tolerant during flowering, and too much light or too long may cause the plant to have lush foliage but sparse buds and small flowers. If the light time is less than 4 hours, it will also cause poor growth due to insufficient light, especially in the growing season to ensure sufficient light. >>>More