What s the deal with the horizontal stripes that the printer prints?

What to do if horizontal stripes appear in printer printing.

1. The developer is surrounded by a carrier and a toner drum.

Caused by adsorption or spillage on paper.

2. Caused by poor operation of the stirring device in the developer or the toner is agglomerated by moisture.

3. Reflector.

or if the lens is contaminated, just clean it.

2. What should I do if the printer is jammed and I can't get it out.

1. Open the lid, take out the toner cartridge, and take the paper. You can open the front cover of the printer, take out the toner cartridge first, and then pull out the jammed paper, but pay attention to the fact that you must take the paper in the direction of feeding, and never turn any knob in the opposite direction, and slowly pull the paper out of the printer, do not tear the paper. (Note:.)

Some laser printers.

Paper jams are frequent, mainly due to inappropriate paper weight. For example, if 70 grams of paper is required, it is better not to use 80 grams of paper. )

2. If the paper is often jammed, it is necessary to check the paper feeding channel, remove the debris in the output path, and the front edge of the paper should be just above the metal plate. Check if the paper roller is worn or the spring is loose, and the pressure is not enough, that is, the paper cannot be fed into the machine. When the paper roller is worn and cannot be replaced for a while, the method of winding rubber bands can be used for emergency treatment.

After winding the rubber band, the friction of the paper is increased.

It can bring the paper feed back to normal. In addition, the installation of the paper tray is not normal, and the paper quality is not good, which will also cause the failure of paper jam or paper inability to take out.

3. The phenomenon of paper jam is too common in daily life, and there may be internal causes of the machine, but a considerable proportion is due to improper use. Sometimes there is no paper inside the printer, but the printer prompts that the paper is jammed, at this time, you can do a clear memory operation (the operation of clearing memory is different for each printer, you can call the manufacturer's free service** to consult the engineer).

It can be seen that the printer jam or horizontal streaks are faulty problems, and the cause needs to be investigated and dealt with, such as the horizontal streaks may be caused by the carrier around the developer and the toner being adsorbed by the photosensitive drum or spilled on the paper.

1. If it is an inkjet printer, it may be that there is a problem with the printhead.

2. Try cleaning the nozzle first.

3. No, replace the nozzle with a new one.

1. There is too much air in the inner cartridge

1. Judgment method: Before and after cleaning the nozzle, print the nozzle pattern. If there is a change in the position of the broken wire, it means that there is too much air in the inner cartridge, and the excess air in the inner cartridge needs to be discharged.

2. Solution: Using a syringe to extract air from the cartridge will destroy the sealing performance of the cartridge and cause difficulties in judging the specific fault parts. It is recommended to use a safe exhaust method to drain excess air from the inner cartridge.

Second, the nozzle is blocked

1. Judgment method: before and after cleaning the nozzle, print the nozzle pattern, if the broken position is fixed, it means that the nozzle is blocked.

2. Solution: Usually clean the nozzle 2-3 times, and it can be used normally. If the nozzle is seriously blocked, you can use the nozzle no-dismantling technology to clean it.

2. Click to open the printer in the computer, click to adjust the printing option after entering, click the print head cleaning option after entering the page, and then you can see that the automatic cleaning will begin.

Hope it helps.

If there are horizontal stripes, if it is a uniform horizontal streak, it must be a problem with consumables, and replacing the original toner cartridge and toner cartridge can solve the problem. If the problem persists, it is recommended to report it for repair directly, which is a hardware failure.

Hello, dear, the printer prints horizontal stripes, taking win7 computer as an example, the solution is: 1. First of all, on the win7 computer desktop, click the "device and printer" option in the "start" icon in the lower right corner. 2. In the "Devices and Printers" interface, double-click "Epson Printer".

3. After that, in the "Epson Printer" interface, click "Adjust Printing Options". 4. Then in the "Adjust Print Options" interface, click on the "Print Head Cleaning" option. 5. After that, in the "Printhead Cleaning" interface, the display starts to clean automatically.

6. Finally, there are no white stripes on the paper. Sincerely, Sakura hopes to help you and wish you a happy life! If you have any questions, you can give me feedback in time If you think it is helpful to you, please give me a good answer! Thank you!

When the printer prints**, there are horizontal stripes, most of which are caused by the blockage of the nozzle of the print head.

You can clean the print head directly from the printer's control panel, or you can clean the print head through the printer's driver.

If there is no improvement, check whether the ink cartridge is almost used up, the ink level is low, and prepare to replace the ink cartridge by checking the ink lamp on the printer's control panel.

It may also be that the continuous printing time is too long, you can turn off the power, wait for 10-20 minutes, and try it on.

The nozzle needs to be cleaned, and it is estimated that this will not solve the problem fundamentally, so it is better to calibrate.

In the Start -- Settings -- Control Panel -- Printers & Fax -- Find Your Epson Printer -- Right Click -- General -- Print Preferences -- Maintenance -- Printhead Calibration Then you start calibrating it four or five times.

Take out the toner cartridge and shake it from side to side, or replace it with a new one.

Hello, first of all, we open the "Control Panel", find the "Devices and Printers" option, click to enter; Then, go to the "Printers & Faxes" page, we select the connected printer, and then right-click and select "Printing Preferences"; Next, go to the "Printing Preferences" page, we select "Maintenance", select "Deep Cleaning"; When the Deep Cleaning dialog box pops up, type the check mark in the box in front of the option, and then click Next. The "Deep Cleaning" dialog box pops up, we select the "Start" option, and enter the stand-alone machine;The deep cleaning begins, and we just have to wait quietly for the progress bar to finish; Finally, when the progress bar is completed, the "Cleaning Completed" dialog box will automatically pop up, we click the "End" button, and then print yes, the white bars and white horizontal lines will disappear.