What s the deal with the photocopier that made a lot of black streaks?

Updated on number 2024-07-19
6 answers
  1. Anonymous users2024-02-13

    The reason why there are a lot of black streaks in the photocopier's copying: the toner cartridge is leaking.

    Solution: In general, the drum core is dirty or worn, and the printing can be restored to normal after the drum core is cleaned.

    Another case is if the drum core is placed on the ground during the powder change, or if the drum core touches the screwdriver.

    and other hard objects, the drum core will be worn. Thanks to the photosensitive drum.

    The core is made of photosensitive material, so the repair method is to repeatedly wipe the surface of the drum with drum polishing cleaner 3-4 times.

    Be careful not to leave the cleaner on the surface of the drum and then put it back in the drum holder and it is ready to use.

  2. Anonymous users2024-02-12

    1. Clean the optical scan first.

    2. Check the imaging unit.

    3. Check the fuser unit.

  3. Anonymous users2024-02-11

    1. There is a problem with the optical scanning unit.

    There is a problem with the 2 imaging unit.

    3. There is a problem with the fixing unit.

  4. Anonymous users2024-02-10

    Streaks appear on the photocopier's copy. Streaks are a common problem, occurring in the form of light streaks, in the absence of toners, and black streaks, which look like spills out of toners. The problem shows that the toner doesn't stick where it should be on the paper.

    There are generally several reasons for this:

    1.Cleaning is required.

    Over time, the internal components of the copier collect dust, dust, and dirt. Failure to properly clean one of the machines inside can affect its performance. Running naked often is a sign that the corona wire is dirty, especially in older machines.

    Corona wire at the bottom of some copier, put the charge on the paper, so the toner will hold a piece. Please refer to the manufacturer's instructions or contact a professional copier's repair service for instructions on how to clean parts for a particular machine. Cleaning your copier in-house every two months can help prevent streaking.

    Similarly, clean the glass copy boards, window cleaners to avoid marks on the paper, which can be streaks and smeared copies.

    2.Toner issues.

    A potential problem with the toner cartridge can cause a couple to run naked. One is the cartridge, which is not sufficient toner. Most photocopiers warn you that you need to replace it if you run out of toner.

    Another problem is that the cartridge needs to be cleaned. Many cartridges use the copier's drum charging cable. If this part is dusty, the drum will not charge the paper normally and can lead to streaking.

    Streak running can also cause excess toner to spill out of the reservoir of the cartridge.

    3.Paper issues.

    Photocopier five flower copies, because sometimes there will be something wrong with the paper. If you use anything other than copy paper, it may not be able to charge properly so that the toner will stick. Another potential problem is that low humidity can cause static electricity to document and prevent if properly charged.

    To avoid this problem, store the paper in an area with moderate humidity, especially on cold winter days. If you suspect that the paper currently loaded in the machine is static, stack it, hold it with one hand, and fan the page with your thumb and forefinger on the other.

    4.Hardware issues.

    Other issues cause streaking to do your copier's hardware. In particular, a malfunction of the drum unit will not be able to transmit a clear image copy paper and will produce streaks. If it doesn't charge properly, it may need to be replaced.

    Hardware issues are usually taken care of by a professional copier repair technician.

  5. Anonymous users2024-02-09

    1. The black bar on the copy is parallel to the direction of the paper road, the reason is: the main charging electrode wire is dirty, rusty or knotted; There is debris in the path of light, and stains obscure the light; Localized contamination or damage to the power dissipation lamp; Dirt or scratches on the surface of the drum The cleaning scraper is bruised, chipped, or heavily soiled; The surface of the fuser roller is dirty or scratched.

    2. The black bar on the copy is perpendicular to the direction of the paper road, the reason is: the developing device is polluted; , axial scratches or spots on the surface of the drum; The fuser roller is dirty; The scanning mirror is loose.

    Solution: There is an accessory on the printer called toner cartridge, a green cylinder, which is damp. Take a hair dryer and blow it.

  6. Anonymous users2024-02-08

    When the printer prints the file, there will be a white horizontal line and white bar, which tells us that the printer should be cleaned, and the white horizontal line will disappear after cleaning.

    1. Open the control panel.

    Find the [Device and Printer] option, click enter, as shown in the following figure, <>

    2. Enter the [Printer and Fax] page, we select the connected printer, and then right-click to select [Printing Preferences], as shown in the figure below, <>

    3. Enter the [Printing Preferences] page, we select [Maintenance], select [Deep Cleaning], as shown in the figure below, <>

    4. The [Deep Cleaning] dialog box pops up, enter the check mark in the box in front of the option, and click [Next], as shown in the following figure.

    5. The [Deep Cleaning] dialog pops up, we select the [Start] option, click to enter, as shown in the figure below, <>

    6. Start the deep cleaning and quietly wait for the progress bar to complete, as shown in the figure below, <>

    7. When the progress bar is completed, the [Cleaning Completed] dialog box will automatically pop up, we click the [End] button, as shown in the figure below, when printing again this time, the white bar and white horizontal line will disappear, you can try it.

Related questions
4 answers2024-07-19

How photocopiers work.

1. The electrostatic photocopier directly projects the optical simulation image of the original through the optical system to the charged photoreceptor drum through exposure and scanning to generate an electrostatic latent image, and then completes the copying process through the steps of development, transfer and fixing. >>>More

13 answers2024-07-19

First of all, check whether there is a problem with the toner, but the customer has been cooperating with us, and the powder has always been the original powder provided by our company, so this possibility can be ruled out, and then the only way to check is that the fuser roller is broken, and after checking, the fuser roller is indeed sticky with toner. So the only way to do this is to remove the fuser roller and clean it. When taking the fuser roller, the back cover should be removed first, then the side door should be opened, the screws at both ends of the fuser roller should be removed, and then the three sets of connected lines behind the fuser roller should be taken out. >>>More

15 answers2024-07-19

Generally, when the photocopier is damp, there will be four phenomena: partial whiteness of the copy, blank copying at startup, wrinkled paper and lines in the copy. Can be solved in a simple way: >>>More

11 answers2024-07-19

1. There are dirt in some places on the piece of glass where the paper is placed; >>>More

8 answers2024-07-19

I used to do typing and copying agencies, I did it for more than four years, and the old photocopiers were used two, and finally I bought a new one, you had better just buy a copy function, and I don't want to print a fax scanning all-in-one machine, because there are a lot of problems with that kind of type, you are a typing and copying company must scanner fax machine printers have been separated, so don't buy a photocopier so complicated, the probability of a complex machine is also high! You go to the technology market and Jiefang Road to see more, you can bargain hard, I buy a new Kyocera machine is not bad, but I buy a few days later than a friend and spend more than 800? At that time, I also bargained, thinking that it might be about the same, but later I realized that it was too expensive! >>>More