Now, if you buy an integrated stove, how do you get the flue hole in the kitchen or something?

If you buy those integrated stoves with better after-sales service, such as Martian and Beidou, these will generally come to your home to help you measure it, and the store will have someone in charge of this.

Summary. Where is the chimney hole of the integrated stove hit.

1. The flue is reserved for punching position, and the integrated stove is a ground row, so it needs to be 15 cm away from the ground at the bottom of the flue. The opening distance is 180mm in diameter, and the check valve must be installed when installing, the check valve that comes with the integrated stove is not very good, it is recommended to buy the check valve of the submarine, the effect is better. Second, the height of the integrated stove is adjustable, and the bottom of the integrated stove has a leg to adjust the height, if the ground is uneven or inconsistent with the height of the countertop, it can be adjusted.

It is recommended to buy an integrated stove first, and then install the cabinet when the integrated stove returns, and install it in place at one time to avoid workers coming to the door many times. Before customizing the cabinet, the integrated stove data needs to be provided to the designer. It is 900mm wide, 1290mm high and 600mm thick.

3. The punching position needs to be punched in three positions, and the power cord hole is 50mm. The natural gas hole is 50mm, but it is recommended to open it larger. Smoke pipe perforated 235mm.

There is one on the left and one on the left of the power supply and one on the left and one on the natural gas Be sure to pay attention to the power supply not to be placed in the position of the natural gas meter, it must be changed. If you install an integrated stove, you must consider the location of the natural gas meter, whether it will affect the smoke pipe.

Where is the chimney hole of the integrated stove hit.

Where is the chimney hole of the integrated stove hit.

1. The flue is reserved for punching position, and the integrated stove is a ground row, so it needs to be 15 cm away from the ground at the bottom of the flue. The opening distance is 180mm in diameter, and the check valve must be installed when installing, the check valve that comes with the integrated stove is not very good, it is recommended to buy the check valve of the submarine, the effect is better. Second, the height of the integrated stove is adjustable, and the bottom of the integrated stove has a leg to adjust the height, if the ground is uneven or inconsistent with the height of the countertop, it can be adjusted.

It is recommended to buy an integrated stove first, and then install the cabinet when the integrated stove returns, and install it in place at one time, avoiding the side or eliminating the need for workers to come to the door many times. Before customizing the cabinet, the integrated stove data needs to be provided to the designer. It is 900mm wide, 1290mm high and 600mm thick.

3. The punching position needs to be punched in three positions, and the power cord hole is 50mm. The natural gas hole is 50mm, but it is recommended to open it larger. Smoke pipe perforated 235mm.

There is one on the left and one on the left of the power supply and one on the left and one on the natural gas A sharp bend must pay attention to the power supply should not be placed in the position of the natural gas meter, must be changed. If you install an integrated stove, you must consider the location of the natural gas meter, whether it will affect the smoke pipe.

The distance between the flue mouth of the integrated stove and the ground should be 30 centimeters on the left and early on the right, if the distance deviation is too large, it may have an adverse impact on the connection of the smoke exhaust pipe, resulting in the smoke can not be discharged smoothly. However, the requirements for the installation height of different styles of integrated stoves are also the same as those of the early brothers, so it is also necessary to determine the installation height of the flue mouth according to the specific situation of the Jizhique into the stove.

The treatment of the original flue hole of the integrated stove needs to be done carefully to ensure the safe and effective removal of smoke and exhaust gases. Here are some steps to take to deal with the original flue hole:

1.*Clean the Flue Hole**: First, make sure the flue hole is clean. Use a brush or vacuum cleaner to remove any dirt, oil, or debris to ensure that the flue is clear.

2.Measure Size: Measure the size of the original flue hole to get an idea of its diameter or size. This will help in the selection of the appropriate flue pipe or connection.

3.Installation Connector**: Depending on the size of the flue orifice, select the appropriate flue pipe or connector and install it on the original flue orifice. Make sure the connection is tight and there are no problems with air or smoke leakage. Spine Kai.

4.*Sealing**: Use a high-temperature sealant or high-temperature resistant insulation material to ensure that the connection is well sealed to prevent smoke or exhaust gas leakage.

5.*Testing**: Once the installation is complete, perform a test to ensure that the flue system is working properly. Light the integrated stove to observe whether the smoke and exhaust gases are effectively exhausted, and check that the connection points are safe.

6.Compliance checks: Depending on local regulations and safety standards, compliance checks may be required to ensure that the flue system meets safety and environmental requirements.

7.*Maintenance & Maintenance**: Regularly inspect and maintain the flue system to remove ash and dirt to ensure its long-term and effective operation.

Please note that handling the original flue hole requires a certain amount of professional knowledge and skill, and if you are not sure how to do it, it is best to have a professional or installer install and handle it. Incorrect handling can lead to safety issues and improper functioning of the flue system. Safety is always a top priority.

Integrated stove is one of the kitchen appliances, which has become an indispensable part of modern kitchens due to its beautiful appearance, easy cleaning, and high safety performance. However, in use, some users may encounter problems with the original flue holes, such as the flue gas is not easy to discharge, easy to accumulate dust, etc.

The method of dealing with the original flue hole is simple. First, use needle-nose pliers or a screwdriver to pry the protective mesh on the original flue hole open or remove it. Then, use a cleaning brush or a tool like a car wiper to clean the original flue hole of the dirt or sludge.

Finally, reinstall the protective net on the original flue hole, tighten the screws or insert it firmly.

When dealing with the original flue hole, it is necessary to pay attention to the following points: 1. Clean the original square foot rental flue hole regularly, and use the hole to ensure the smooth discharge of flue gas and prevent ash accumulation; 2. Be careful not to damage or lose the protective net; 3. In order to increase the safety of maintenance, it is best to carry out the trembling operation when the power is off and the electrical appliances are plugged in.

Now the kitchen will be full of smoke smell every day, people inhale too much will also have a certain impact on the body, so it is very important to install an integrated stove in the kitchen, many people do not know much about the flue hole of the integrated stove, do not know how big the hole should be, today to tell you this little sense of life.

1. Determine the location of the hole before opening the hole, and the smoke exhaust outlet of the integrated stove should be between 30 cm and 2 meters away from the wall.

2. The size of the hole should be determined according to the size of the stove smoke pipe, the height of the smoke hole is about 2 meters, the diameter of the smoke hole is between 15 cm and 20 cm, and the regular integrated stove has a specified size.

Second, how to choose a good integrated stove.

1. Look at the brand, there are many integrated stoves on the market now, and some of them do not have production certificates, so it is best to choose a big brand to have a guarantee, and the better integrated stove brands on the market are: Fangtai, Boss, Jia Ge, Fire King and many other well-known old brands.

2. Look at the suction, the most important thing for the integrated stove is that the function of the smoke absorption should be good, and the larger the air volume, the more quickly the smoke can be removed, and the greater the wind pressure value, the smoother the exhaust.

3. Look at the energy efficiency of the integrated stove, that is, whether its firepower is good or not, when stir-frying, it is necessary to have a good firepower, the general firepower value is in kilowatts, and the value of the integrated stove above 4 kilowatts will be the most fierce.

4. See whether the integrated stove is good to clean, the fumes have accumulated for a long time, it needs to be removed and cleaned, we had better choose the cooktop panel is integrated, and the smoking head can also be disassembled, so that it is more convenient for us to clean up the oil.

5. Look at the safety of the integrated stove, whether there is an automatic flame-out protection device, anti-leakage protection, and fire prevention function. Round.

3. Precautions for using integrated stoves.

1. Close the gas valve after use, and check whether the switch button on the stove is closed before each use.

2. When the color of the flame is yellow or the color is abnormal, adjust the damper in time.

3. Do not put flammable and explosive items on the stove.

4. The gas pipe should be checked every once in a while, and it should not be loosened, and it should be replaced once a year.

A good integrated stove will make our kitchen look clean and tidy, and will not let the existence of oil smoke at home, the above is the arrangement of the opening size of the integrated stove and how to choose a good integrated stove, hurry up and collect it, I hope it will play a role in everyone when buying a cavity.

Close the opening at the top and open it at the bottom. The flue is connected up and down, and the opening is the same, how can the owner not want to. A key problem is that the air outlet of the environmental protection stove and the air outlet of the range hood downstairs are next to each other (the opening of the range hood downstairs is above his house), so it is easy to have the problem of product odor

Shenyang Sen is suspicious of this celery anti-smoke treasure, which can solve the problem of flue aftertaste.

If it is a building, the flue is generally shared, that is, multiple floors share a flue, in this case, it is not possible to plug it, which will affect other residents, so only the surface can be blocked, you can take a wooden board, make it the same size as the flue hole (remember to leave an edge, so as to get stuck, or open a small groove around the flue mouth), and then directly plug it.