When decorating a house, when is a natural gas water heater generally installed?

All in the familyHard mountedInstall it laterGas water heatersIt's better.

For the installation of gas water heaters, it is necessary to accurately reserve them in the early stage, such as confirming the location of its water inlet and the location of the gas water heater's smoke exhaust. There is also the power supply for the gas water heater and so on. If these locations are not confirmed in advance, the gas water heater may be installed directly, which may lead to an unsuitable location and cannot be installed later.

In addition, the room in which the gas water heater is installed must not be a confined space. That is to say, if the gas water heater is installed in the kitchen, the kitchen must have an exterior window. If there is no external window, it is not allowed to install a gas water heater in the room.

For the family kitchen, do not make it an open kitchen, so that the gas cannot be ventilated.

Precautions for the use of natural gas water heaters.

Household gas water heaters generally need to be cleaned once every 6 to 8 months to reduce the emission of harmful substances and save gas. Experts said that when the household gas water heater is used for a long time, the effluent quality and service life will be affected by the long-term precipitation of trace impurities and minerals contained in the water, so it is recommended that the inner tank be cleaned every six months.

Users who do not turn off the power supply of the water heater all year round should always check whether the water heater is normal, and send it to the maintenance point for maintenance in time if there is an abnormal situation. In the case of normal use of the water heater, it is recommended to replace the thermostat at the designated maintenance point every three years.

and heaters, and replace over-aged water heaters in a timely manner.

The above content refers to Encyclopedia - Natural Gas Water Heaters.

People's Daily Online-What suits you is the best Choosing a water heater is actually not difficult.

Personally, I think that natural gas water heaters are generally installed at the end, after all, I think this way can be installed more beautifully.

The problem is that many users and even decoration companies are not familiar with the use specifications of gas appliances, resulting in the failure to install gas water heaters. Therefore, when decorating, we need to make the following preparations for the installation of the gas water heater (the following preparations need to be completed in the hard decoration stage). It has brought a lot of convenience to our lives, but when do we install gas water heaters when decorating?

What problems do you need to pay attention to when installing a gas water heater? What are the steps to install a gas water heater? Today, I will try to introduce it to you based on these questions.

If the hydropower is in the sky, the position of the smoke exhaust outlet should be at a distance from the water and electricity pipe in the sky, because the temperature of the smoke pipe of the strong exhaust gas water heater is very high; Decoration is an experiential job, and the technical content is not very high. But it is necessary to do a good renovation project. Only by considering all aspects of this with experience and responsibility can we do a good job.

The installation time of the water heater is arranged after the completion of all the hard decoration categories of the decoration project, and the time needs to be arranged independently. But the details that need to be paid attention to before and during installation are the key points we should pay attention to. However, to determine the location of the water heater, certain factors need to be considered, such as the size of the space, the size of the nozzle, the location of the gas meter and the smoke machine stove, the location of the smoke exhaust hole, etc., the specific installation is generally divided into two situations: If it is an integrated ceiling, it is usually installed before the tile is pasted and can be installed before moving in. If it is a gypsum board ceiling, it is best to install the flue gas pipe before the ceiling or before the ceiling, if there is a living balcony not far from the kitchen or directly close to the gas meter, then the natural gas water heater must be directly installed outdoors. Unless the living balcony needs to be treated with glass sealing windows, the installation time can be done after the hard installation is done and cleaned.

Most of them are determined according to the habits of decoration in various places, and in the city where I am now, the gas water heater is installed after the foundation is hard-installed, and the integrated ceiling and cabinets are installed after the installation is completed, and some people wait until the decoration and cleaning are completed before installing the gas water heater.

Probably the water heater will be installed when the renovation is basically completed. Because water heaters are very important, they will be installed with great care.

Generally, the installation of TR water heater starts after the simple renovation of the house.

Generally, a natural water heater will be installed at the end of the renovation, which will not waste your own decoration time, and the cost is relatively low.

Generally, when installing cabinets, when the kitchen bricks are pasted, this can be installed.

Do the math how much it will cost you to renovate your home

It is recommended to wait for the completion of the hard installation and start the installation before the ceiling installation. Although the relationship between the installation of the gas water heater is not very large, but if it is installed in the construction stage, it will leave a lot of dust on it, and if it is installed at the end, the dust generated will still have an impact on the later use, so it is recommended that after the foundation construction is completed, it is better to install the water heater at the same time in the main material installation stage.

What are the benefits of hard-installation phase installation:

1. Avoid pollution: After the hard installation is completed, the gas water heater is installed, and the dust is relatively small at this time. If the gas water heater is installed, the dust enters the gas water heater, which will affect the use effect of the gas water heater and even affect the service life.

2. Accurate positioning: After the hard installation is completed, the gas water heater is installed, and the reserved size and position are more accurate, and the gas water heater is installed at this time, and the wall and roof are more compatible.

3. Affected by the installation conditions of gas water heaters. Due to the special installation requirements of gas water heaters, various positions should be accurately reserved in the early stage, such as confirming the location of its water inlet, the area where the gas water heater exhausts smoke, and the power supply of the gas water heater ignition. If the gas water heater is installed directly without confirmation, it may lead to an unsuitable location and cannot be installed in the later stage.

Enter the area and get the decoration for free**].

Enter the area and get the decoration for free**].

When decorating a new house, it is best to have a natural water heaterHard mountedAfter completion, reserve the position of the water heater for smoke exhaust before installation.

Social and economic development is getting faster and faster, people's living standards are also improving, and many people will choose to use gas water heaters in their lives.

to facilitate their own life, but there are great doubts about the installation of gas water heaters. It is best to plan the time of the gas water heater in advance before installation and choose the corresponding installation location, so that it will not affect our normal use, and I hope everyone can understand the relevant knowledge in time.

1. After the hard installation is completed, the installation of the natural water heater will be carried out.

Changing water and electricity, laying floors, latex paint.

Wallpaper is a very important process, we must ensure that the above processes are completed before the installation of natural water heaters, so that we can better leave the corresponding installation position to avoid pollution. After the hard installation is completed, the gas water heater is installed, and there is basically no dust in the house at this time, which can better ensure the service life of the gas water heater, and at the same time, you can also choose accurate positioning after the hard installation is completed. Generally speaking, after hard installation, the size and position can be reserved in advance, and the corresponding gas water heater can be selected according to the corresponding position and size, which can better guarantee the use effect.

2. After reserving the relevant position, the installation of the natural water heater will be carried out.

For the installation of natural water heaters in the early stage, we must make sufficient preparations, because different types of houses, the installation location of natural water heaters is different, only to determine the point of its water intake, the location of the gas water heater smoke exhaust, and the location of the power supply of the gas water heater ignition, so as to better ensure the normal use of the gas water heater.

3. What else should I pay attention to?

Gas water heaters are best installed in the kitchen, of course, the kitchen must have external windows, generally speaking, rooms without external windows are not allowed to install gas water heaters, this is to better avoid the risk of gas leakage, endangering the lives of others.

I think it's best to install a water heater in the spring, because the temperature in the spring is more suitable and the heat is not likely to be damaged.

Natural water heaters are best installed when installing stove gas, because this time can better judge whether the water heater is suitable or not.

Install it with the cooktop. At this time, the water and electricity system has basically been laid, and the tiles have been pasted, and the installation is more reasonable at this time.

Controversy can be both, because you can press the water heater to turn on the gas first, or turn on the gas first, and then don't open the valve

However, after turning on the gas first, you can take a shower after pressing the water heater. Buying a water heater first is not a no.

It is not necessary to turn on the gas in your home before installing a gas water heater. After installing the gas water heater, there will be a professional to turn on the gas in the home.

Gas water heaters generally include: shell, water supply and exhaust device, burner, heat exchanger (commonly known as water tank), air control device, water control device, water-gas linkage device and electronic control system.

The specific structure is mainly composed of shell, surface shell, switch knob, smoke pipe (strong smoke exhaust pipe), fan motor (optional), air pressure switch, heat exchanger, thermostat, burner, water-gas linkage valve, solenoid valve, exhaust hood, ignition, ion flame induction needle, pulse generator, bottom shell fixed plate, electric controller, bottom shell, etc.

The control system of a domestic gas water heater is an electronic control system, generally with a flame detection device and a control device. The control system has the functions of electronic ignition, flame-out protection, safety interruption, water constant temperature, overheating protection, incomplete combustion protection, and also has the functions of re-ignition, man-machine display, alarm function and remote control, and the gas water heater has three kinds of timing controller, digital controller and fuzzy controller.

The inductive elements of gas water heaters include water flow sensors, ion flame sensors, temperature sensors, thermocouples, micro switches, reed switches, Hall sensors, etc. Its function is to convert the relevant information of the working condition of the water heater into an electrical signal, so as to realize the control of the working state of the water heater.

Install a gas water heater.

, it should also be installed in the correct way and steps to make it more convenient to use. The gas water heater is installed after the installation of household water and electricity, and the front wall and floor tiles are installed.

Paved. When installing, you need to pay attention to the installation order. It is best to install it in the correct order so that the water heater will not be subject to any restrictions and the installation will be more convenient. When installed this way, it is more convenient to make holes in the wall and determine the final installation location of the water heater.

When installing a gas water heater, it can be installed at the door of the bathroom. It is more convenient to use water at ordinary times, and the toilet area can accommodate a gas water heater. When installing, do not connect the gas that needs to be used in the kitchen to the gas water heater, otherwise it may cause a shortage of gas.

If you use natural gas at home, you can install a gas pipeline next to the gas stove. In this case, the gas water heater can be installed above the gas stove. In this way, holes need to be punched, and the pipes in the toilet and the pipes in the kitchen need to be connected together.

Gas water heaters are usually wall-mounted, so there is usually a bracket. Before hanging the water heater, we need to measure and fix the bracket according to the actual position. It should be noted that gas water heaters are best installed on load-bearing walls to avoid potential safety hazards.

If it is hung on the wall of the lamp body due to special circumstances, we will carry out special treatment. Once the bracket is secured, we will hang the gas water heater. When hanging the water heater, make sure the water heater is firm and not loose.

The installation is usually between 165-175. In general, our human body's line of sight is parallel.

After the water heater is repaired, we need to repair the inlet valve. If the outlet is empty, we'd better not install the valve, because it will affect the speed of the outlet and the effect of our use. When installing, it is necessary to ensure that the installation location is in a well-ventilated position, so that it is more convenient to use.

Try not to install your water heater in a room where there is no air, as this may cause carbon monoxide poisoning.

It's perfect in the summer, because it's not particularly cold and you don't feel very cold during installation.

The electric water heater will be installed after most owners have completed the renovation, because the early supply of natural gas will incur a lot of costs, which will be unacceptable to many owners.

When installing a natural gas water heater, the water and electricity lines must be laid, and then natural gas equipment needs to be installed, so that the water heater can be installed at this time, so that the installation is more convenient and can avoid rework.

The impact is that it is a bit troublesome to install, and it is necessary to drain 2 water pipes, 1 cold water and 1 hot water.

The analysis is as follows: There are currently three types of water heater installation environments:

1. Indoor strong rowing, the installation environment must be a ventilated room, and the kitchen cabinet must not work. The blower forcibly blows the exhaust gas out of the pipe through the smoke pipe, but the combustion requires a large amount of oxygen, and the enclosed environment will be insufficient, and the combustion will be insufficient, or even not burned.

2. The outdoor unit is directly installed outdoors like an air conditioner outdoor unit, which can withstand wind and rain. The oxygen it needs for combustion is taken directly from the outdoors, and the exhaust gas is discharged on the spot.

3. Balanced, the only one that can be installed in the bathroom, this one can be installed in the kitchen cabinet. It is a large smoke pipe with a small smoke pipe inside, one intake and one outlet, and the exhaust gas produced by combustion and the oxygen required are used outdoors. Like you have already renovated, you can choose to install it in the row pipe.