What material windows are being installed by everyone now?

The following is the information found on the Internet, I hope it will be helpful to you:

First, look at the profile: the profile is bad, directly determines the quality of the doors and windows, the strength of the doors and windows produced with inferior profiles is low, and it is easy to change color and deform. Requirements for profiles:

1. Appearance: natural color, smooth and smooth surface, uniform and consistent.

2. Multi-cavity structure: there is an independent drainage cavity and a steel reinforcement cavity to prevent the steel lining from corroding and better play the role of heat insulation and noise reduction.

3. It has a certain strength and elasticity. Fourth, in order to eliminate lead poisoning, lead-free green profiles should be selected.

Second, look at the accessories: hardware, steel lining, wool tops and other accessories is the key to the production of high-quality doors and windows, plastic steel doors and windows with insulating glass, the weight per square meter may exceed 40 kg, so the requirements for various accessories are very high. The quality of accessories from different manufacturers varies greatly, and it also varies several times.

Inferior fittings are damaged after a short period of use, causing the window sash to sag, push and pull not moving, the switch is not tight, the sealing is poor, and even leaving safety hazards, there are many painful lessons in this regard.

3. Look at the production: the production equipment and technology determine whether the overall performance of the doors and windows is excellent. According to the requirements of the national standard, the diagonal difference of plastic steel doors and windows should be controlled within 2-3 mm, and there are strict process parameters and control ranges, which requires certain production equipment and technology as a guarantee, and a high-quality workforce.

Therefore, there is a world of difference in quality between the plastic steel doors and windows produced by street workshops and regular manufacturers.

Fourth, look at the installation: three points of production, seven points of installation, if you do not pay attention to the installation standards, it may cause deformation of doors and windows in the future. The thermal expansion coefficient of plastic steel doors and windows is almost 6 times that of steel, so there must be expansion joints between the window frame and the wall to prevent the doors and windows from being deformed by thermal expansion and cold contraction or slight settlement of the house.

At the same time, in order to ensure waterproof, thermal insulation and sound insulation performance, the expansion joints must be filled with elastic materials and then sealed with sealant. These materials are high in quality, and the quality varies greatly, so it is necessary to strictly prevent cutting corners and shoddy when installing.

Fifth, look at the service: plastic steel doors and windows life of more than 15 years, in the process of use of the inevitable glass damage, hardware damage, etc., and the user to solve the more difficult, which requires the manufacturer to provide long-term perfect after-sales service, the choice of regular manufacturers is certainly much more reliable than the flow workshop.

Sixth, look at the :* to shop around, but must be on the basis of the same materials and performance than the first, if a greedy cheap, not compared with the performance of the trade-off, the loss is always the user.

There are three commonly used window materials: aluminum alloy, wood and plastic steel, because of different materials, so their respective advantages and disadvantages are also different.

My home is an aluminum-clad wood smart window of Milan window.

Most of them are plastic steel windows or aluminum profile doors and windows.

Most of them are plastic steel windows or aluminum profile doors and windows.

Interior designers will recommend using PVC doors and windows when the renovation budget is relatively generous. The corrosion resistance of plastic steel doors and windows is more suitable for urban use, and the plastic steel doors and windows can resist the corrosion of acid and alkali and other chemicals

Personally, I think aluminum alloy windows will be better. In the process of home decoration, the selection of doors and windows is very important, which brings a sense of security to our family life.

There are many window decoration materials on the market at present, so which material is more suitable for windows? Next, let's take a look at what materials need to be chosen when installing windows.

1.Aluminum alloy. Aluminum alloy is a metal material, so there is no need to worry about aging.

This material is relatively strong and has strong impact resistance, but aluminum alloy windows have relatively weak thermal insulation properties. Since the metal itself is a conductor of heat energy, the outside temperature will be transferred to the interior through the frame of the window decoration. Secondly, aluminum alloy windows have many advantages, first, light weight, high strength, aluminum alloy doors and windows.

The materials are mostly hollow thin-walled composite profiles. The material has a high bending strength in cross-section.

Windows and doors made of this material are durable, have little deformation, are lightweight, and are easy to use. Second,.Strong corrosion resistance, it has strong corrosion resistance, and the oxide layer is not easy to fade and peel off, does not need to be painted, and does not appear oxidation.

Therefore, it has a clear advantage in this regard compared to other materials. Third, the appearance is good-looking, and the aluminum alloy is anodized.

After treatment, the surface can show ancient lead, ancient liver, bronze, ancient golden yellow, ancient silver white and other colors. The appearance is still relatively good.

2.Made of plastic steel. Plastic steel is a plastic material, so the material is small in weight, good in thermal insulation, and relatively low. Because the windows are often exposed to the wind and the sun, some friends will worry about plastic steel windows.

It ages, but in fact, high-quality PVC windows can last for about 100 years.

3.Timber. Wood can be said to be a perfect window frame decoration material.

It has distinct advantages in terms of thermal and acoustic insulation. The window frame is made of wood with multiple layers of special treatment. The treated solid wood will not crack and deform, and there is no need to worry about the material being bitten and corroded by insects.

Based on the above list, I think that aluminum alloy windows are better.

I think it's better to choose plastic steel for life. Because the quality of this kind of window is very good, and the sound insulation effect is relatively good, the installation process is relatively simple, and there will be no damage.

It is better to choose aluminum alloy material when installing windows. The main reason is that aluminum alloy material is not only strong, but also relatively corrosion-resistant.

You can choose stainless steel, as it will not cause corrosion if it rains.

There are four main types of window materials, among which broken bridge aluminum alloy is better

Aluminum alloy.

Aluminum alloy windows are not only very fashionable and beautiful, but also have particularly good weather resistance and anti-aging ability. The thickness of the selected aluminum alloy profile should be above, and the quality is more guaranteed. At present, aluminum alloy windows are often used when decorating balcony windows in southern regions.

Broken bridge aluminum alloy.

It is a relatively expensive material for balcony windows. Broken bridge aluminum is actually on the basis of ordinary aluminum alloy profiles with a thermal insulation layer, so that it has a good thermal insulation, sound insulation, fire resistance, water tightness, anti-corrosion, heat preservation, etc., broken bridge aluminum is a very ideal balcony window material.

Solid wood windows.

Solid wood windows are available in a variety of colors, and the decorative effect is very beautiful. However, wood is easy to age, cold and hot telescopic changes greatly, and it is easy to be corroded after exposure to sun and rain, and the service life of use is not as good as that of aluminum alloy and broken bridge aluminum.

Plastic steel windows.

Plastic steel window is also a kind of window material used by many owners, which has good sound insulation, heat insulation, fire resistance, air tightness, water tightness, anti-corrosion, heat preservation, etc. However, the profile section of the plastic steel window is larger, and the lighting performance is slightly worse than that of the aluminum alloy window.

Performance characteristics of broken bridge aluminum alloy:

Good heat retention.

The PA66 nylon in the broken bridge aluminum profile has low thermal conductivity and good heat preservation.

Good sound insulation.

Impact-resistant.

Because the outer surface of the broken bridge aluminum profile is aluminum alloy, it has better impact resistance than the plastic steel window profile.

Good airtightness.

The broken bridge aluminum profile window is equipped with multiple sealing strips at each gap, which has good air tightness.

Good watertightness.

The doors and windows are designed with rain-proof structures to completely isolate rainwater from the outside.

Good fire resistance.

Aluminum alloy is a metal material and does not burn.

Good burglar resistance.

Broken bridge aluminum alloy windows, equipped with excellent hardware accessories and high-grade decorative locks, make thieves helpless.

Maintenance-free.

Broken bridge aluminum alloy window profiles are not easy to be eroded by acid and alkali, will not turn yellow and fade, and almost do not need to be maintained.

Window materials can be divided into three categories - wooden, plastic steel windows, and broken bridge aluminum windows.

1. Plastic steel - because it is made of plastic, it is small in weight, good in heat insulation, and relatively low. Because they often have to face the wind, rain and sun, the most concerned is the anti-aging problem of plastic steel windows. In fact, the service life of high-quality plastic steel windows can reach about 100 years.

2. Aluminum alloy - because it is made of metal, there will be no aging problem, and it is strong, impact-resistant and strong. However, one of the weakness of aluminum alloy windows is the thermal insulation, because metal is a good conductor of heat, and the temperature between the outside and the interior will be transmitted with the frame of the window.

3. Wood - relatively speaking, wood should be the most perfect form frame material, no matter from the perspective of heat insulation, sound insulation and other obvious advantages, and the innate texture and natural patterns are more exciting. Although it is wood, in fact, some of the solid wood used to make window frames has undergone layers of special treatment, not only no moisture, but even more demanding and even sucked off the fat, in this way, the so-called wood has actually been like a fossil, after the treatment of solid wood, only retains the appearance of the wood, but the quality is completely different, will not crack and deform, not to worry about insect bites, corrosion, and the strength is also greatly increased.

Wooden windows, iron windows, aluminum alloy windows, plastic steel windows.

First choice: aluminum alloy windows, plastic steel windows.

Wood, iron, aluminum, steel, broken aluminum.

The best broken strip aluminum.

Personally, I think that the wood is better to build the overall effect.

1. Plastic steel windows: The raw materials of plastic steel windows are rigid strength oxidation resistant plastics, because aluminum-plastic materials do not conduct heat, so the thermal insulation of plastic steel windows is better, its interior is supported by steel, so the overall frame will not be deformed, the wind in the north is relatively strong, and the plastic steel windows are becoming the first choice, it is not easy to age, but also strong, and can also ensure the temperature and utilization rate of the balcony.

2. Aluminum alloy windows: Aluminum alloy windows are more common in home life, it is relatively strong, has the characteristics of no aging and rust, and its impact resistance and strength are also favored by many consumers, so there are more aluminum alloy windows on the market, but aluminum alloy windows also have disadvantages, because it is metallic, and the thermal conductivity is good, so it can quickly transfer the outside heat into the house in summer, resulting in cold winter and hot summer.

3. Broken bridge aluminum window: because the thermal conductivity of aluminum alloy windows is good, it can transfer heat into the house, in order to change this performance, after research and development, the "broken bridge" technology is used on aluminum alloy windows, which improves this shortcoming a lot.

4. Wooden window: This is a more traditional window, more suitable for pastoral style and classical style decoration, this material of the window is now rare, because the material of solid wood is easy to decay under the perennial wind and sun, although its naturalness and natural aesthetics are good, but because it is not very suitable for modernity, so it is less seen.

1. Solid wood: Solid wood windows have a variety of colors to choose from, and the decorative effect is very good, but solid wood is easy to age, cold and hot telescopic changes greatly, easy to be corroded after sun and rain, and the service life is not as long as aluminum alloy windows.

2. Aluminum alloy: aluminum alloy windows not only have a long service life, but also are fashionable, beautiful, weather resistance and anti-aging ability, and the thickness can be above when purchasing aluminum alloy windows, so that the quality is more bright to ensure that the sales are made, especially when decorating balcony windows in the southern region, aluminum alloy windows will be chosen.

3. Plastic steel: plastic steel window is also a popular window material for lead, which has the advantages of sound insulation, heat insulation, air tightness, and anti-corrosion. However, the section of the plastic steel window profile is larger, and the lighting performance is slightly worse than that of the aluminum alloy window.

1.PVC window: has good sound insulation, thermal insulation and waterproof performance, and **low. However, its bearing capacity is poor, it is susceptible to low temperature and ultraviolet rays, and its life is relatively short.

2.Aluminum travel alloy window: It has strong bearing capacity and good corrosion resistance, and the appearance is beautiful and durable, but its sound insulation effect and thermal insulation effect are relatively poor.

3.Wooden windows: have excellent sound insulation and thermal insulation properties, and have an elegant appearance, bringing warmth and comfort. However, their structures and systems are relatively costly, and they are relatively susceptible to decay and insect infestation.

The selection of window materials should take into account the cost performance and suit their own needs, and it is recommended to consider the factors of multiple aspects when choosing window materials, such as thermal insulation performance, physical properties and decoration.

Windows are an important part of our decoration, choose a good window material durable and worry-free, so what materials are better to decorate windows?

1. Introduction to new door and window materials: [solid wood].

Of course, some wealthy people often use solid wood doors and windows in the decoration of their villas, which can not only highlight their status, but also benefit physical and mental health. Its market ** is generally about 1,500 yuan to 4,000 yuan square meters.

2. Introduction to new door and window materials: [plastic steel].

Plastic steel is one of the materials for doors and windows that have just become popular, and the doors and windows made of it have good acid and alkali resistance and corrosion resistance; And for the construction personnel, they will also recommend consumers to buy this kind of doors and windows, because their installation is very convenient, can save them a lot of time, its market **: 500 yuan to 2000 yuan or so square meters.

3. Introduction to new door and window materials: [aluminum alloy].

Aluminum alloy doors and windows are one of the most popular door and window materials, which can be designed according to the requirements of customers, such as pushing and canceling Zheng La, casement opening, upper suspension, etc. It is easy to shape during the production process and can meet the needs of consumers at different levels. Its market ** is generally about 200 yuan to 500 yuan square meters.

4. Introduction to new door and window materials: [stainless steel].

Stainless steel is a lot of office buildings like to use the material to take the song, it has a good wear resistance, corrosion resistance, oxidation resistance, and, the surface color is bright, in line with the modern trend, very fashionable, and the bridge cover body weight is light, can effectively reduce the weight of high-rise buildings, its market ** generally: 800 yuan to 2500 yuan about square meters. 5. Introduction to new door and window materials

Aluminum-clad wood] aluminum-clad wood is a popular door and window material, it retains the advantages of solid wood, has a good improvement in the performance of solid wood, and the appearance of doors and windows made with it is very good-looking, which is also the most popular door and window material for many consumers, and its market is generally about 800 yuan to 2000 yuan square meters.