What are the methods and precautions for repotting the happy tree?

The happiness tree you just bought should be repotted in time, otherwise the branches will break.

The repotting of the Happy Tree depends on the season, the temperature should be suitable, the best time is the end of December, and it is best to choose at noon. The repotting of the happy tree should do the following:

1. Before changing the pot, you should water the happy tree with enough water, and fix the potting soil to facilitate the separation of the tree from the pot. Then take out the tree and the soil, transplant it into another large pot, and then fill the surrounding area with soil.

2. The first watering after changing the pot must be watered enough. After repotting, pay attention to the loose soil rich in organic matter, that is, the soil prepared by the mixture of garden soil, humus soil, river sand, decomposed organic fertilizer or Bika microbial agent;

3. Place the replaced happiness tree in a cool place for about 4 days, and give about an hour of light every day. Wait for the leaves to stretch and open before proceeding with your usual care.

4. Remove the yellow leaves during the growth period, and you can also cut off the new branches and buds to promote growth. If the yellowing of the leaves is severe, the roots can be dug out and exposed, then diluted with potassium permanganate and sprinkled on the roots.

Small Happiness Tree potted plants, because the potting soil is small and the nutrients are limited, it is best to repot it once a year, and the time to change the pot is generally in spring or autumn.

Before changing the pot, we need to stop the water for a few days, the dry potting soil can reduce the damage to the root system when depotting, gently pinch the edge of the pot, so that the root system can be better taken out, check the root system after depotting, if there is black rot to prune first, if there is no problem, you can directly pot, the root system at the bottom is slightly scattered to it, revealing a small amount of root system, which is convenient for contact with the new soil;

The choice of flower pot does not need to be too big, it is better than the original 1-2 large, and the flower pot selected is better permeable and breathable, which is conducive to the growth of plants;

If the happy tree grows very slowly, it means that its root system is full, its root system is very shallow and easy, we can repot it in autumn, but it is not easy to replace all the soil, you can change part of it.

When repotting the happy tree, choose loose and fertile, well-drained humus soil as the substrate for cultivation. Before repotting, it is also necessary to prune off the rotten and dry root system of the happy tree. After that, you can replant the pruned tree into the soil and water it thoroughly to allow the tree to resume growth as soon as possible.

Note that in winter, the tree of happiness needs to be moved indoors for maintenance to avoid frostbite.

When repotting the happy tree, you first need to choose the right potting soil, which can be loose and fertile, well-drained humus as the cultivation medium. When mixing soil, it can also be mixed with well-rotted farm manure to improve the fertility of the soil. In addition, it is recommended to choose a clay pot with a porous bottom and a large space spacing as a container for cultivation.

When repotting a happy tree, it is also necessary to properly prune the root system. You can use sterilized scissors to prune off the rotten and dry roots of the happy tree, and apply carbendazim solution to the wound after pruning to avoid the wound being infected with diseases and causing rot.

After that, you can replant the pruned tree into the potting soil, and be careful not to damage the root system of the tree. After planting, it needs to be watered once to soak all the soil, so that the happy tree can quickly adapt to the growth environment, and after the repotting is completed, the happy tree can be transferred to a ventilated environment for maintenance.

The cold tolerance of the happy tree is poor, if the temperature of the growing environment is too low, it will lead to the poor growth of the happy tree, so when the temperature is too low, you can cover the quilt above the happy tree to keep warm, and you can also transfer the happy tree to a warm room for maintenance, and control the ambient temperature between 15 and 25.

1. Repotting timeGenerally, the potting soil for the Happy Tree should be changed every two years.

2. Soil preparationIn the process of repotting, it is necessary to prepare soft and fertile soil with good drainage in advance, and can use humus soil or peat soil, pastoral soil, sandy soil, and base fertilizer to mix and prepare soil, and pay attention to the soil to be disinfected before use.

3. How to change potsTake out the happy tree from the old potting soil, use the sterilized sharp scissors, cut off all the rotten roots, dead roots, diseased and weak roots of the root system, reduce nutrient consumption, disinfect the wound, and then replant it in the new potting soil.

<> when repotting the Happy Tree, you need to prepare loose and fertile soil with good drainage, and you also need to use sterilized scissors to cut off the rotten and dry root system of the Happy Tree to make it grow healthily, and then you can replant the Happy Tree in the soil, and you also need to control the ambient temperature between 15 degrees and 25 degrees to maintain the normal growth of the Happy Tree.

1. Soil conditions.

When repotting the happy tree, you need to prepare suitable potting soil first, you can choose loose and fertile humus loam with good drainage, you can also apply farmhouse fertilizer after decay in the soil to enhance the fertility of the soil, and you also need to provide a mud pot with more drainage holes and large space at the bottom for the happy tree.

2. Prune the root system.

In the process of repotting the happiness tree of the bureau, it is necessary to prepare a pair of sharp scissors that have been sterilized at high temperature, and then use scissors to cut off the rotten and dry roots of the happiness tree to avoid further deterioration of the situation.

3. Replant.

When changing the pot silver height of the happy tree, you need to replant the plant in the prepared pot soil, you need to be careful when operating, so as not to damage the healthy and intact root system of the happy tree, and you need to water the happy tree once after planting, so that the soil is completely wet, help the plant quickly adapt to the environment, and then you can move the happy tree to a ventilated environment Tongbo let for maintenance.

4. Suitable temperature.

When maintaining the happy tree, if the ambient temperature is too low, it will lead to poor growth of the plant, and even lead to the death of the happy tree, so you need to do a good job of keeping warm measures for the happy tree, you can use cotton cloth to cover the top of the plant, you can also move the happy tree to a warm room for maintenance, and then control the ambient temperature between 15 degrees and 25 degrees.

1. Dry to reduce water and nutrient consumption

Cutting off the dry trunk can play a role in conserving water and nutrients, but to what extent, and which position is more appropriate? Generally, you can use a knife to cut through the bark to inspect the dry part of the trunk, find the green and yellow parts, and then cut off all the dry parts of the upper part.

After the dry trunk is removed, the wound needs to be treated as necessary, such as sealing the wound with paraffin, which can reduce the loss of water from the wound site and also avoid wound infection.

2. Prepare mixed potting soil to be more conducive to the rooting and survival of plants

After the trunk is cut off, we repot it. However, when changing pots, be careful not to damage the root system of the plants. The soil used in the pot is also more important, and some pot friends say that peat soil is used.

However, it is not appropriate to use peat soil alone, mixed soil should be used, and it is recommended to use peat soil, river sand, and garden soil according to a certain proportion.

3. Avoid watering thoroughly and fix the root by watering a small amount of watering

The dried tree is replanted in a new pot that is one size larger. Usually, after potting potted plants, they should be watered in time to fix the roots. However, for the happy tree, it is generally enough to use a little water to water it after changing the pot.

Just do not water thoroughly, and the water temperature should be as consistent as possible with room temperature, not too much temperature difference, otherwise it will affect the vitality of the root system of the plant. After the first small amount of water after the potting (note that it is not watered thoroughly), do not water it again for a short time.

Because the vitality of the root system of the happy tree that has just been repotted is very poor, and it has not yet grown new roots, the ability of the roots to absorb is limited. If you water too much at this time, it is easy to inhibit the breathing of the roots, and suffocation may occur.

4. Place the seedlings in a warm place that can receive scattered light

The next thing we need to do is to place the repotted happy tree in a warm place that can receive scattered light. Generally, the temperature can be controlled above 20 °C, because the happy tree prefers a warm growth environment, so it is more appropriate to provide scattered light at this time, which is more conducive to the formation of transpiration tension of the trunk.

5. Water in time to avoid the potting soil being too dry and affecting the survival

For the second watering, it is usually necessary to wait for the potting soil to dry out and crack for a while. And this time, the watering of the royal year can not be as small as the first watering Hanyuan, but must be watered thoroughly until the water at the bottom of the basin water outlet flows out. In this way, it can be ensured that the happiness tree can be successfully dismantled and maintained in good condition after repotting.