P.S. How do I change the background to a solid blue background?

1. Open it with PS**.

2. Make a constituency (background).

3. Set the foreground color to blue and fill it in blue with a paint tool.

4. Cancel the constituency.

<> first create a new document and adjust the color in the Layer option.

1.Find a random one that needs to deal with the color of the background you just changed, and then cut out the background, and you can use the magic wand tool for the solid background.

2.Click on the Magic Wand tool on the left toolbar, there are Quick Selection and Magic Wand Tool, and the quick selection is clear when comparing the water chestnut.

3.The hair area is sometimes poorly chosen, and the tolerance value above can be adjusted.

Keep what you need, then select the background layer and hold down Ctrl+Delete to fill in the solid blue background color.

Cut out the original image, put it in a new layer, and fill the original layer in blue! If you mainly know how to cut out pictures, you can easily change the background.

If you simply change the color, it's good to choose the color and fill it directly, and if the background is complex, you can use the magic wand tool to select and fill in the blue after selection.

The foreground color is set to blue. Select the background layer and fill the foreground color. FYI.

After outlining the edge, feather, press Ctrl+J to copy a new layer, under the layer, add a background layer, fill in blue...

Hide the background image.

It's too general for you to ask like this, you should give a**, and then process it for you as required!

PS How to change the background color, the operation method is as follows. 1. First of all, in the open PS software, click "Magic Wand Tool" and select the part that needs to modify the color.

2. Then click on the small box above the color picker.

3. Now you can select the color you want to change, and then click "OK".

4. Then select the Paint Bucket tool and click on the section where you want to change the color.

5. Finally, you can see that the background color has changed.

Use PS to open **, open the Magic Wand tool option. Set the foreground color to blue, select the selection, and spray the selection with a paint bucket.

1. First open PS in the computer, import**, and then click [Magic Wand Tool].

2. At this time, the background part of the selection is selected.

3. Then click [Foreground Color] to set the foreground color to blue.

4. Then select [Paint Bucket Tool] in the toolbar.

5. Finally, spray the background selection part, so that the background will turn blue.

The way to change the ** background color to blue is to swap out the foreground and then fill the background with blue.

In exchange for the foreground, it depends on the specific situation of the foreground and background:

1. If there is a large contrast between the color of the foreground and the background, you can use the color range to extract.

2. If there is a channel in the channel that is black and white, you can use the channel method to cut out.

3. If the junction between the foreground and the background is obvious, you can use the magic wand tool to deal with it.

4. If the boundary between the foreground and background is not obvious, you can use the pen tool to cut it.

5. If the boundary is complex, such as hair, you can use the knockout2 filter to cut out. Wait a minute.

PS Here's how to change the white background of your ID photo to blue:

Tools Ingredients: Founder Flyover, Win7 Home Ordinary Edition, PSCS6

1. First open the Photoshop software on the computer, and then open the white background ID photo that needs to be processed in PS.

2. Next, press the shortcut key "Ctrl+J" to copy the background layer to prevent the subsequent sentry operation from damaging the original layer.

3. Next, in the upper toolbar, select the "Select" and "Color Range" pointed by the red arrow, and then use the eyedropper tool to absorb on the white background of **, and click "OK".

4. Next, you can see that the white background is selected.

5. Next, change the foreground color to blue, and then press the cold section ghost shortcut key "ait+delete" to fill in the foreground color.

Open [Core Dress PS], open the ** you want to use, click [Select] - [Subject] to cut out all the main body of the character, select [Select and Cover] - [Set Edge Brush Bend Boll Tool] to remove the excess background color of the characters in the layer, click [OK] to bring up the selected area of the copied background layer buried in the bend, reverse the selection, then fill the background, and finally cancel the selection.

1.How to change ** red background to light blue with ps.

Alternate materials: photoshop, ID photo.

1. Choose a red background that needs to change the background color**, save it on the desktop, in order to make it easier to find, take the following picture as an example. 2. Open the ** you want to load in the photoshop software, load it into the window, and get ready to proceed.

3. Find the Lasso tool in the toolbar on the left side of the PS interface and prepare to execute. 4. Select the part of the background that you want to replace in ** under the Lasso tool, as the red part of the background is selected in the figure, and press the delete key on the keyboard to delete.

5. Select the fill color in the menu bar. 6. Select the color you need to replace, and click OK after selecting the background color of the sedan chair and blue closing the river.

7. Finally, press the shortcut key Ctrl+Delete to fill in the background color, as shown in the figure below. 。

2.ps. How to change ** background red to blue.

Step 1: Open a document in PS** and copy the background.

In the second step, select the Image - Adjust --- Replace Color menu.

In the third step, use the eyedropper to absorb the background color and adjust the color tolerance to a maximum value of 200.

Step 4: Adjust the Hue slider and choose the blue background color.

Fifth, because the edges of the hair are mixed with the background color red, if you want to go to Yunnan red, you need to use a straw with a plus sign to add a color selection, if you have selected in the selection, you can use a straw with a minus sign to reduce the color. Here's how it works:

Step 6: Duplicate the background** again and add a quick mask on top of the adjusted layer (press Alt and click the Quick Mask button with the left mouse button).

Step 7: Adjust the foreground color to white and the background color to black, and paint it with the brush tool.

Step 8: Apply a mask and merge the layers. Finish.

3.How to ps the background red which teases to become blue.

Find the Replace Color command in the image below!

Replace the color you want in the window below, or you can replace the color in the selection!

Summary. 1. Open the ** you want to modify with ps, and click "Open" in the "File" in the upper left.

2. Then find the magic wand in the tool on the left (the arrow in the picture), click on it and then three magic wands with different functions (marked by a red rectangular box), in order to facilitate the description, it is named A, B, and C sticks from left to right. The function of the A stick is to automatically select the edge of the cutout, and there are more + and - in the upper right of B and C, and the function is to expand and narrow the cutout range.

ps**How to change the background color to blue.

The operation method of replacing the background of Fuyu ** with PS is as follows:1、Open the ** you want to modify with PS, and click "Open" in the "file" of Chenxiao in the upper left. 2. Then find the magic wand in the tool on the left (the arrow in the picture is marked), click on it and then appear three magic wands with different functions (marked by a red rectangular box), in order to facilitate the narrative, from left to right, the missing brother is named A, B, and C sticks.

The function of the A stick is to automatically select the edge of the cutout, and there are more + and - in the upper right of B and C, and the function is to expand and narrow the cutout range.

3. Cut out the picture from the beginning. Tap the A stick first, move the cursor around the portrait, hold down the left button, and move around the edge of the portrait so that the dotted line roughly coincides with the edge of the portrait. After completion, select B according to the actual situation, and the adjustment range of the C rod will basically coincide with the dotted line of the cutout and the blind circumference of the edge of the portrait.

4. After the adjustment, move the mouse to the background of the virtual ant, right-click, and click "Select Reverse" in the toolbar that appears. Right-click again and select Fill in the toolbar.

5. On the fill page, select the fill color, as shown in the icon, the generic blue RGB is 67, 142, 219 respectively. Click Confirm. **The background color is bright and cracked, and the macro becomes the blue book source rolling color.

1. Select the file and open it.

2. Select the storage path of the original **. Here is the desktop, find **, double click to open.

3. Due to the single background, you don't need a pen to cut out the picture, just click the "Magic Wand Tool".

4. Click on the background.

5. Click the "Foreground Color" button.

6. Choose the appropriate blue color in the color picker.

7. Click OK.

8. Then press and hold the keyboard foreground color fill shortcut key "Alt Delete" at the same time. The background turns blue.

9. Press and hold the shortcut key "Ctrl D" to cancel the selection and view the effect.

10. Click "File" - "Save As".

11. Fill in the file name and select the file format, which is generally jpg.

12. Take the calendar alone to "save" the letter and minxiao. Then you have a ** that changes to a blue background.

First of all, the background of ** is better to be a solid color, otherwise you have to cut out the picture before you can change the background color.