PS How to cut out the background of the characters is similar

Use the Pen Tool to clasp out the outline and remove the background.

1. Press Ctrl+O to open the image file - dripping water. jpg。

2. Select the 'red' channel with the strongest contrast in the channel panel. Drag the 'red' channel onto the Create New Channel button at the bottom of the panel to copy a Red Copy channel.

Press Ctrl+L to open the Levels dialog box, and click the Sample in Image to Set Black Point button on the right. Click in the gray area on the background to set the black point range, and click OK to close the dialog box.

In the Channels panel, drag the 'Red' channel again to the Create New Channel button at the bottom of the panel to copy a Red Copy 2 channel.

Click the Image button in the menu bar. Select Adjust from the menu, and then click the Levels command to open the Levels dialog box.

Modify the input parameters of the scale in the Levels dialog box (117,,128). Make the blister appear white and the background black, and click the OK button.

Switch to the Layers panel and click the Create New Layer button below. Create a new layer 'Layer 1'.

Double-click on the 'Layer 1' name to activate it and rename it to 'Gradient Background'. After completing this operation, please see 'Photoshop Similar Background Color Keying Image (2)'.

Hello dear, I'm glad to answer for you. To cut out an image with a similar background and object color, you can try the following steps:1

Use the Magic Wand or Lasso tool to select objects, and if the color nuclei are too similar to be selected, you can adjust the tool options appropriately, such as increasing the tolerance value or using the Lasso tool to outline. 2.Copies the selected objects to a new layer, keeping a backup of the original layer.

3.Select Invert in the new layer, that is, select the background, use the Eraser tool or the Trim tool to gradually clear the background, you can adjust the eraser size and dodge appropriately to get better results. 4.

Gradually refine the edges of the cutout, adjust the knots and accuracy of the image, and make a complete cutout effect. 5.If you encounter a difficult image, you can use blend modes and smudge tools, such as the Soft Light Blend Mode and the Soften Fade Blur tool to soften and blend the edges to make the cutout more natural.

Summary. When the background and character are similar in color, the cutout steps are as follows:

Open the footage - click "Channel" - select the green channel, copy the green channel.

Hold Ctrl+L to open the color levels, increase the contrast, and click the eyedropper icon to customize the black field for the character. After that, the white areas of the characters are blackened with a black brush.

When the background and character color are similar in PS, how to cut out the character completely.

When the background and character are similar in color, the cutout steps are as follows:

Open the footage - click "Channel" - select the green channel, copy the green channel.

Hold Ctrl+L to open the color levels, increase the contrast, and click the eyedropper icon to customize the black field for the character. After that, the white areas of the characters are blackened with a black brush.

How to use PS cutout to cut out the characters.

Use the "Magic Wand" to select the desired area and click "Adjust Edges". Select the unselected ones and click the OK button. If you find that some things are not real, you can adjust them in the mask at this time, hold down alt and click on the mask.

Select the white selection, select the untruths, and fill in the white. Go back to the layer and you're good to go.

Please reply for specific steps.

How to customize black square.

It's not easy to get it when you try.

The above are the specific steps, it is recommended that you take a look at the teaching materials of PS first. All right.

When the object to be cut out is similar to the background color, it can be difficult to cut out the image with PS. Here are some useful tips and steps for Spine Picks: First, open ** and select the "Lasso Tool" or "Polygonal Lasso Tool" tool, or any other selection tool you commonly use.

Select a suitable lasso tool and start drawing a rough outline path to select the entire object. Once the marquee selection is complete, right-click and select "Select" and then "Modify" Expand". In the Extensions dialog box, enter a value for the extension like the macro and set it according to the actual situation.

In general, you can choose 10-20 pixels, and if you need a finer cutout, you can reduce the pixels appropriately. Once the extension is selected, right-click the selection again and select Feather. Enter a radius size (set as you like) in the Feather dialog box, which will make the edges of the selection softer and more natural.

Select "Mask" and then "Invert". This will cause the background to be masked and the object to be keyed out. If the cutout is not ideal, the mask can select the Brush Tool to adjust the area of the mask.

The above steps are only a general operation process, and you need to adjust it according to the specific situation when you actually use it. If you feel difficult, you can also refer to some PS tutorials to learn and practice.

1. PS software casually opens a character image and <>

2. Then double-click the layer to unlock it and <>

3. The background of the character is white, you need to remove the white background, in the left menu bar, select the quick selection tool.

4. Select the tolerance, and put the back checkmark on the continuous, so that the white shirt inside the character will not be selected, try the tolerance value a few more times, and select all the white backgrounds.

5. Click the above menu "Clear command", the background will be removed, <>

6. Select a background picture and drag the difference into the ps.

7. The background is on top of the character, and at this time, you need to drag the layer to the bottom of the character layer. False grinding.

8. Place the mouse on the layer of the character, hold down Ctrl+T, zoom the character, zoom out to the appropriate range, and open the mouse.

9. At this time, there is a part of the background that is redundant, you can cut this part, click the left menu bar, and the crop command.

10. You can drag the mouse to cut off the excess part, so that the desired effect will come out.

When the background and character are similar in color, the cutout steps are as follows:

Step 1: Open the footage - click "Channel" - select the green channel and copy the green channel.

Step 2: Hold Ctrl+L to open the color levels, increase the contrast, click the eyedropper icon to customize the black field for the character. After that, the white areas of the characters are blackened with a black brush.

Step 3: Use the "Magic Wand" to select the desired area and click "Adjust Edge". Select the ones that are not selected, as shown below. After that, click the OK button.

Step 4: If you find something that is not real, you can adjust it in the mask at this time, hold down Alt and click on the mask. Select the white selection, select the untruths, and fill in the white.

5. Go back to the layer, and you're good to go. If you have other colors, you just need to create a new canvas, fill it with colors, pull the cutout image down, and then crop it to the appropriate area.

Here's how: Cutout Techniques.

1. You can use the pen tool to cut out the main part of the character.

2. After that, use the channel to pick out the hair part of the character.

If it is a thin and many hair, use the "channel" to cut out the picture, and if the real thing is not close to the background tone, you can use a pen tool, such as a car. Deduction should also be divided into regions, and they should be combined. PS doesn't mean that you must only use one tool or fixing method, you look at the general situation first, what is better to use, I hope it can help you.

For simple points, you can use the Lasso tool to hook out the portrait and add some feathering to the selection, and for precise points, you can use the pen tool to hook the anchor point and then change the selection and add some feathering.

You still have to look at what kind of picture, there are too many ways to cut out the picture.

PS Place the keyed character in the background layer with the Move Source tool, and then adjust its size, position and color to blend into the background. Taking PS CS5 as an example, perform the following steps:

Use the first move tool in PS,Hold down the mouse and drag it to the background you want to place,When you drag it to another **, you will see the mouse version。

There is a + below the arrow of the underlying weight, and you can let go. As for how you want to make the object fit into the background, you can use the ** filter to make the character and the background more natural and blended, the shortcut key is (f)...

Steps and precautions for bai.

As follows: 1. Find and open a suitable new background image with dups;

DAO2: Select the inner PS (in the toolbox on the left side of the interface) to move the tool, hold down the left mouse button, and directly drag the cut-out character to the new background image. A new layer of characters will be automatically generated in the new background image.

3. Select PS [Layer] menu - [Merge Visible Layers], and finally save it.

Things to note::

After dragging the keyed person into the new background image, in order to make the fusion effect more natural, it is best to adjust the position and size relationship between the two layers (the person and the new background) (to change the position, you can directly drag with the move tool, and the size and angle adjustment can be achieved by using the deformation shortcut Ctrl+T). Second, it's best to be able to "feather" the edges of the character layer (take the appropriate size of the eraser tool's flow and lightly smear it on the edges of the character; You can also use the blur tool to adjust the flow and paint directly on the edges of the character). Third, in order to make the color matching and transition of the two layers more harmonious, you can adjust them on their respective layers by "Adjust" under the [Image] menu.

Finally, if necessary, you can add a "light filter" to the people layer to make it work more naturally with the new background layer