How can a person stick wallpaper without wrinkles? What s a good tip?

After the dish soap and water are mixed, then sprinkle the water on the wall, spread the wallpaper on the wall, look at the vertical, and finally take a card, scrape from the middle to both sides, and scrape the water on the wall, so that the wallpaper will not blister and not fold, in case the fold of the wallpaper with water is also easy to move If it is a puzzle or a flat flower, you must first see the puzzle clearly before starting, because if you tear it off too much after pasting, the wallpaper will also be easy to blister, if it is really blistered, and you don't want to paste it again, Remember to puncture it with a needle as soon as possible before scraping it flat with a scraper.

When you notice that the wallpaper you put on is wrinkled, and if the wallpaper is broken when you reapply it, you can't stick it on the wall. At this point, you can stagger the damage and use it in a small area. After the putty is dry, apply a layer of primer to the wall.

The color of the primer should be chosen according to the color of the other walls. If the house is new, it is recommended to use a white primer. Priming is used to add a protective film to the wall to prevent corrosion.

This problem is the same as sticking the mobile phone film, generally from top to bottom in turn, and then use a soft cloth from the center of the position to the surrounding flat can be scraped with a scraper (cardboard is also OK) in the process of pasting, in addition, remind me, if you want to buy white wallpaper, you should also consider whether this white can cover the graffiti on the wall, because some paper may be more transparent, will reveal the traces on the wall.

Moreover, the glue is in the middle of the wallpaper and the wall, forming a confined space, which makes it difficult for formaldehyde to be released from behind the wallpaper. This in turn leads to a longer cycle of formaldehyde damage. There are a few things to ask yourself if you can bear it first:

The wallpaper near the window is easy to turn yellow and discolored, the environment will become moldy if it is humid for a long time, and the sudden change in temperature and humidity will cause the bulging edges...In short, it's a little delicate, because the goddess of immortality is all maintained. Directly all latex paint, no longer dare to use wallpaper. I don't want to post it in vain, I hope you see it, you must be cautious about wallpaper, no matter how good this thing is, it is also harmful, especially for children and the elderly.

Clean the walls to make sure they can get stuck. Three people do. One holds the head and glues it by a centimeter. One is holding a large bundle of wallpaper, one is holding the quilt paper that has been uncovered at the bottom, and the other is holding the wallpaper that has been removed with a spatula. No wrinkles at all.

Self-adhesive wallpaper is different from professional wallpaper, professional wallpaper has professional tools to prevent crooked pasting in the process of pasting, self-adhesive is afraid to rely on its own level, or find a reference reference line as a standard. As for the problem of bubbles, you can use a scraper (cardboard is also fine) to scrape during the pasting process, and in addition, remind you that if you want to buy white wallpaper, you should also consider whether this white can cover the graffiti on the wall, because some paper may be more transparent and will show the traces on the wall.

Wallpaper can be said to be a material that people use more now, this material has a variety of patterns, can meet people's decoration needs, is because of these unique advantages, it is deeply liked by people. Next, I will introduce to you how to paste self-adhesive wallpaper without wrinkles.

1. The wall must be flat, measure the size of the wall to be pasted, cut the wallpaper first, and draw the distance between them.

2. After confirming that there is no problem, brush the glue and post it from top to bottom.

3. When pasting, it can not be too fast, so that there will be no bubbles, if it is a splicing part, it must be seen clearly, and neatly, otherwise it will be easy to blister if it is torn off and realigned.

The above is an introduction to how to stick self-adhesive wallpaper without wrinkles, I hope it can help netizens.

Summary. Dear, hello, I am happy to serve you, in the process of pasting wallpaper, the wallpaper wrinkles and trims the method is to open the roll of the wallpaper, re-roll it, you can reduce the original creases. The glue used in decoration contains water, and the creases of the wallpaper can basically be eliminated after contacting the moisture, if there are still a few crease marks, it doesn't matter, after the wallpaper is on the wall, it will be tightly attached to the wall under the action of the wallpaper glue, and the creases are basically invisible.

If the wallpaper is damaged when re-pasting, it cannot be used on the wall, but it can be staggered and used in a small area. There are also some embossed wallpapers, whose creases may not be restored after encountering water, whether this is the case, brush a little water to try it is clear.

Dear, hello, I am happy to serve you, in the process of pasting wallpaper, the wall reputation type paper wrinkles and flattening the method is to open the roll of the wallpaper, re-roll it, can reduce the original creases. The glue used in decoration contains good water content, the creases of the wallpaper can basically be eliminated after contacting the moisture, if there are still a few crease prints, it doesn't matter, after the wallpaper is on the wall, it will be tightly attached to the wall under the action of the wallpaper glue, and the creases are basically invisible. If the wallpaper is damaged when re-pasting, it cannot be used on the wall, but it can be staggered and used in a small area.

There are also some embossed wallpapers, whose creases may not be restored after encountering water, whether this is the case, brush a little water to try it is clear.

After using the wallpaper for a long time, the wrinkle is wrinkled, and the processing method is generally loose because the wallpaper is damp, you can use the hair dryer to blow the wrinkle, but do not use a high temperature gear, otherwise the wallpaper is easy to deform; For wallpapers with large wrinkles, you can also use a syringe to inject glue from one side, press down gently, and then wipe off the excess glue, the effect is also good. Usually, be careful not to let the sunlight shine directly on the wallpaper for a long time, and do not let the wallpaper contact the local thermal insulation source, otherwise it is easy to fade; Prevent hard objects from hitting and rubbing against the wall, and if you find a small discoloration, you can repair it with paint or pigment of similar color.

For example, some wallpaper has creases, so if it is not handled properly, there will be wrinkles. The treatment method is to deal with the creases before pasting the wallpaper, and at the same time, when pasting, it is necessary to pay attention to the creases to be compacted, and the amount of wallpaper glue is not too small. If it is a general wrinkle, as long as the wallpaper is compacted with a wallpaper roller, the wrinkle can basically be eliminated.

In general, the main problem of wrinkling after a long time is that the wallpaper is damp. If the wrinkling is not serious, it is recommended to use a hair dryer to blow on the wrinkled parts, so that the moisture will be removed, and the wallpaper will be able to return to normal. If the wrinkled wallpaper problem is more serious, you can also blind that the wallpaper glue between the wallpaper and the wall has failed, at this time you can use a syringe to inject the wallpaper glue under the wallpaper, and then gently smooth and squeeze to remove the excess glue, which can also smooth the wallpaper wrinkle problem.

The main tips for not wrinkling wallpaper are as follows:

After the wall is leveled, then measure the size of the position to be pasted, cut it first, and then draw the distance first, make sure that there is no problem, then lay the wallpaper on the floor, brush on the special barrel of glue, and then post it from top to bottom according to the requirements you want, when pasting it can not be too fast, while pasting it with a towel or something else on it slowly brush down, so that there will be no bubbles, if it is crooked, it doesn't matter, you can start again, because it is not so quick to dry, if it is a puzzle or a flat flower, If it is really blistered, and you don't want to re-paste it, remember to pierce it with a needle in the fastest time, and then scrape it flat with a scraper to squeeze the air out.

It's a bit of a challenge, and it takes at least two people.

First of all, you need to prepare a scraper, which is sold in hardware stores, and the front is the kind that is rubberized (not easy to scratch the wallpaper).

Then the two cooperate, the two cooperate to find the wallpaper at one end, the two cooperate to align the wall cracks, and one person takes the scraper from one end to the other, just like pasting the mobile phone film.

2. Measure the size of the wall, and then measure the wallpaper based on the wall area, pay attention to the length of the wallpaper, which is 5cm more than the actual veneer.

3. Then mix the powdered wallpaper glue with water and the general wallpaper at 1:3, and the foamed wallpaper with 1:2 to reconcile, or use the special glue for wallpaper that does not need to be modulated.

4. Then put the wallpaper against the wall, and paste the wallpaper from top to bottom and from the corners to the inside with a wooden handle brush to level the wallpaper.

5. When encountering a power switch or socket, cover the wallpaper first and then brush it flat with a wooden handle, then use a utility knife to draw a cross diagonally on it, use a scraper against the edge of the switch, and use a utility knife to cut off the excess part.

6. If you encounter a connection by the printed wallpaper, find the consistent position of the pattern at the junction of the two wallpapers, overlap and paste about 12cm wide, and after the whole wallpaper is all aligned, use a scraper to resist, and then cut off the overlapping part with a blade.

7. Pay attention to pasting wallpaper from top to bottom, if you find uneven floating paste, you can use a towel to wet it, and then re-level it with a scraper.

8. Finally, the wallpaper around the door and window is processed in the same way as the wallpaper at the power switch.

9. After the wallpaper is pasted, the original device is installed.

Question: I bought the glue on the original paper, is it right for the gaps.

You use self-adhesive wallpaper, that is, window grille paper.

Spray some soapy water first, put it on it, and scrape gently.

This is a technical job, and it takes a certain amount of skill to stick it well. But you can do it by scraping. Be sure to scrape it little by little.

First use sandpaper to smooth the wall pockmarks, evenly brush the water on the back of the cut wallpaper, or soak it in the bathtub for a while, so that the wallpaper is fully expanded, and then use the special glue for commercial wallpaper, brush it thinly, put it aside, and then brush a thin layer of glue on the wall, carefully collage, and pay attention to whether the position of the pattern is coordinated, and finally use a damp cloth to smooth it.

You can apply some waterproof paint on the wall before pasting wallpaper, and then use putty prepared with waterproof paint, and then pave wallpaper according to the standard process, which is generally not easy to fall off by moisture. If you want to prevent staining and cracking, it is generally necessary to clean the wall with a damp cloth before paving, and apply glue to the back of the wall and wallpaper to enhance the adhesion between the wallpaper and the wall. In particular, the joints of the wallpaper should be appropriately glued, and then smoothed with a clean cloth.