Ask me what to do with the walls in the basement

1. The easiest way is to hang some adsorption desiccant in the basement, the most common is the activated carbon carbon pack, and you can also sprinkle some desiccant on some corners and the ground that are more likely to be wet, you can break the mothballs and sprinkle them there with activated carbon powder to remove moisture, but they have to change the word every once in a while.

2. Most of the dampness is not good enough ventilation, so it is best to install ventilation equipment in the basement, and if possible, you can open a few skylights for ventilation.

3. Check whether there are cracks or damp spots on the basement wall or ground, if there are cracks and aging places that are easy to damp, it is best to shovel off the aging wall that is easy to mold and damp, and the area of the shovel is slightly wider than the aging area, and then brush the paint many times.

4. Don't put any plants in the basement, and at the same time you can put a dehumidifier in it, generally the effect of the dehumidifier is more obvious if the basement is not too large.

5. It is recommended to use some basement materials with good moisture-proof performance and pave a layer of tiles with good moisture-proof performance. What material is good for basement walls. When decorating the basement wall, remember to choose decoration materials with waterproof, mildew-proof and other effects.

How to deal with the common basement wall. This article also introduces several methods for treating basement walls, if you think these methods are not bad, you can also use them when you need to decorate.

Basement walls generally need to be waterproof and breathable. That is, the water from outside cannot enter the house. And the moisture inside the house has to pass through the walls and get out of the house.

When the basement is renovated, the walls and floors need to be moisture-proof. What are the treatment methods for basement walls and floors? PChouse will take you to find out.

1. Wall selection and moisture-proof materials.

Basement moisture-proof can usually be divided into wall moisture-proof and ground moisture-proof, we choose those wallpaper, vitrified bricks and other materials with excellent moisture-proof effect when decorating the basement, so that the wall and ground reduce the damp and mildew ceiling.

2. Floor heating is installed on the ground.

Floor heating can quickly increase the temperature of the ground, and maintaining a certain temperature can make the basement dry and not wet, but the temperature can not be too high, otherwise it will make people feel uncomfortable.

3. Dehumidifier dehumidification.

We can put some desiccant in the basement to dehumidify, but also to achieve a certain moisture-proof effect, such as quicklime, activated carbon and other items, they can absorb the water vapor in the air, so that the humidity in the air is greatly reduced, can play a certain moisture-proof effect. However, desiccant has a useful life and needs to be replaced regularly.

The concrete walls of the basement are usually sturdy, but they lack the aesthetic and comfortable feeling. In order to improve the air quality in the basement, people often need to modify the walls. Here are a few common methods:

1.Flat surface: First, you need to use tools such as sandpaper or an electric grinding wheel to clean up the bumps and hanging debris on the wall surface, and then use cinder plaster to smooth out the wall.

2.Coating: Use special wall moisture-proof paint or wall paint to coat the cement wall. This method makes the basement more modern and comfortable, as well as prevents mold and mildew on the walls.

3.Decorative boards: Nailing decorative boards can make the basement more modern and comfortable.

The purpose of installation is not only to beautify the wall, but also to increase the thermal insulation effect. For a large area of blank space on the wall slag surface, decorative paintings or photo frames can be installed to make the basement more warm.

4.Hanging ** and decorations: Properly hanging ** and decorations can again increase the living comfort of the basement. Large art and home** hanging on the wall can enhance the look and feel of the basement.

In conclusion, there are many ways to treat the cement wall of the basement. But either way, it's important to make sure that they're not only aesthetically pleasing, but also for the comfort of the basement.

Most people who know about décor know that it's a nasty project, and there's more work to be done in the early stages. If you don't prepare in advance, there will be a lot of unnecessary problems. How to decorate the basement entrance wall?

Basement entrance wall,Material selection of front file: When you decorate the basement should choose moisture-proof materials, glass bricks are usually used for basement floors, walls can be used for wallpaper, ceilings and gypscale ceilings are better, these materials have excellent moisture resistance.

Basement entrance wall,Choice of light: Lighting is also the first problem to be solved in the basement, the brightness of the lamp that is conducive to refracting light is the best, the best color in the basement is white, gold, and other bright colors, do not use dark colors such as black or gray.

Basement entrance wall,Exhaust fan installation: Basement ventilation must rely on ventilation equipment to send fresh outdoor air into the room, ventilation in the underground room and natural circulation of air. Replacing the ventilation system and installing exhaust fan ventilation during the renovation process also prepares greenery and improves the air quality in the basement.

1. Pay attention to the selection of underground decorative furniture and household appliances, and it is best not to choose the best wooden furniture. As much as possible, wood is not used, especially underground, as wood furniture can cause blackening and corrosion.

2. The height of the basement should not be less than meters. Otherwise, there will be a sense of oppression. The basement is different from other ordinary floors and has windows for lighting, therefore, the height of the basement is as high as possible, or the interior lighting is improved.

3. The waterproofing of the outer wall of the basement must be done well to avoid leakage into the basement in rainy days or water on the ground, which will cause damage to the decoration surface.

4. There are many pipelines on the top surface of the basement, and the height of the basement should be fully considered to meet the design requirements during construction. The construction of the top pipeline of the garage should reserve the space for the lifting track of the garage door to avoid the garage door being too low and failing to meet the design requirements.

You can get it for free

Nowadays, many homes are equipped with basements that can be used to store some items that are not commonly used in daily life. However, many residents no longer use the basement as a service room but try to renovate it, so the first thing you should do in your décor when renovating is to keep it from moisture. Well, the basementHow to deal with the wall to prevent moisture

1.Apply the desiccant to damp floors and corners of the basement and hang the adsorbent in the basement, but replace it regularly. Moisture in the basement is mainly due to poor ventilation.

As a result, ventilation units can be installed in basements. If conditions exist, several skylights can be opened for ventilation. 3.

Decorate the basement with materials that are well resistant to moisture, such as placing a layer of moisture-resistant tiles on the floor.

1.BasementHow to deal with the wall to prevent moistureThis? The basement design must be checked to verify that the basement's performance is complete.

At the same time, the civil engineering unit and the supervision unit must supervise the handover of the working surface and verify whether the basement wall meets the decoration requirements. If the requirements are not met, the civil engineering unit must be notified immediately for rectification.

2.Basement equipment installation tools must enter the site in advance to avoid conflicts with basement construction and repeated construction. During basement renovation, interception ditches at basement entrances and exits should be considered to avoid storms and pour a large amount of rainwater into the basement in a short period of time.

3. The basement should choose decorative materials with good moisture resistance and mildew resistance, and pay attention to the waterproof work of the underground exterior wall to prevent rain from infiltrating into the basement and causing damage. basement walls. Due to the large number of pipes in the upper part of the basement, it is necessary to consider whether the basement height is consistent with the design requirements during construction.

The basement summarized above for everyoneHow to deal with the wall to prevent moisturequestion, I hope it can help everyone.

You can get it for free

The basement is a place that is particularly prone to dampness, which is common knowledge that many people know, in fact, as long as we pay attention, such problems can be completely avoided.

The easiest way to deal with the resurgence of the basement wall is to suspend some strong adsorption desiccant in the basement, the most common desiccant can be coarsely sprayed on the easily wet floor and some corners, activated carbon packets, and mothballs, but these things need to be replaced every once in a while.

How to deal with the resurgence of the basement wall, check whether there are any cracks or wet spots in the basement, use some necessary waterproof materials to treat it, and it is necessary to deal with it in time, otherwise it will affect the use of the basement.

How to deal with the resurgence of the basement wall, we can prevent those places that are prone to moisture in advance, and cover a layer of good moisture with tiles to resist is also the best problem to prevent moisture.

If you want to use the updated underground to renew some of the trees mentioned in the original wood grain people comfortable, but, basement, cabinets, feel, etc. do not do so do not use as much wood as possible for the layout of the updated basement wood floor.

The ventilation problem in the basement is generally poor, and the decoration time must pay attention to the location and frequent ventilation equipment, so we need to add some green plants to greatly improve the air quality in the basement.

Underground renewal, moisture-proof, but the first problem of basement renewal is the reason for the choice of decorative materials, moisture-proof effect to choose a good material needs to be solved, ceramic tiles are commonly used significant foundation wall of the point wallpaper, ceiling gypsum board ceiling with that, the moisture-proof effect of these materials is very good.

Underground renewal, but lighting is done through the basement door in any way in the basement to solve the problem, choose on what window lighting, the brightness of the backlight is good, a good choice of pants, and the ability to add other buried lights can be performed by setting the light deflection glass tip.

In fact, no matter how we decorate the basement, as long as we focus on the key points, there is no problem at all.

You can get it for free