What should I do if the solid glue is not sticky, and what should I do if the viscose ball glue is n

The solid glue has been left for a long time to dry out and the specific steps to restore the stickiness:

1. Add a small half pot of water to the rice cooker, close the lid and click the start button.

2. Use a small piece of towel to spread it on the steamer that comes with the rice cooker, and then open the solid glue lid and put it on the towel.

3. After the water boils, open the lid of the rice cooker, put the steamer basket with a towel on it and heat it, and cover the lid.

4. Turn off the rice cooker after 15 minutes, do not open the lid, and let it cool in the pot for 3 hours.

If the solid glue is not sticky, we can cut off a layer on the surface, so that the bottom is sticky, and it can be used directly, or you can also apply some water to the solid glue and let it stand for a while, or you can put the solid glue in the pot and steam, and wait for it to cool down after the heating is completed, and it can be used normally.

Solid glue is more common in life and study, it is simple to make, easy to store, and small and easy to carry, extremely convenient to use, more suitable for bonding between papers. However, after we have used it a few times, we may open the lid and it may not stick, so how should we solve it?

The most common way to find that the solid glue is not sticky is to cut off a layer of the surface, so that the bottom is sticky and can be used directly, or we can apply some water to the solid glue, and after standing for a period of time, it will return to normal viscosity.

No, the thread of the cylindrical core in the solid glue is ground off, and the solid glue is lifted by this plus the plastic screw in the middle, but it should be able to come out, and there is a drag at the bottom that can be lifted with a thread, but the solid glue cannot be lowered.

Lipstick glue, also known as solid glue and glue stick, is a glue that can only stick to paper but is not easy to stick, which has the advantage of being easy to carry, will not stain fingers, and can be pasted repeatedly. Its biggest feature is that the paper does not crumple when sticking to the paper, and the lipstick glue is due to the moisture content.

Less will also dry up quickly, and it is a very popular school and office supplies.

Solid glue is a kind of polyvinyl alcohol.

PVA), polyvinylpyrrolidone (PVP), acrylic resin, vinyl acetate resin and other one or more polymer materials as adhesives, fatty acid salts as excipients, glycerin, propylene glycol.

Ethylene glycol is a moisturizing and antifreeze agent, and water is a solvent, which reacts in an environment of 70 to 90 and fills a solid adhesive prepared after cooling.

It is mainly used for pasting all kinds of paper. Add phenolphthalein.

The chromogenic agent with equal pH value can be made into a phantom solid glue, the colloid is purple or blue, and the color disappears after a few seconds of gluing. Add water-soluble dyes.

It can be made into colored solid glue of various colors, and the transparency of the colloid can be adjusted through the appropriate amount of modifier, so as to obtain translucent or highly transparent solid glue.

At present, the solid glue sticks on the market are basically PVA (polyvinyl alcohol) and PVP (polyvinylpyrrolidone) as the main raw materials, and their colloids are white or light yellow. Solid glue rods made of PVA have good market competitiveness due to their lower cost, but because they use formaldehyde as a modifier.

Therefore, the product will remain free formaldehyde that is not good for human health, the control of free formaldehyde content in the preparation process of PVA solid glue is more critical, China's relevant industry standards stipulate that the free formaldehyde content in solid glue shall not exceed, and the mainstream brand solid glue on the market, such as Deli, Chenqi, Yiergao and other brands of solid glue in recent years, have been sampled free formaldehyde unqualified.

Take the boiling water and soak it, and it can still be used.

Summary. If the sticky ball does not stick, it should be because the quality of the tape itself is not good, or the method is wrong. You can spray some alcohol, or toilet water, wind oil, and some water.

The method is to pull apart the adhesive tape (the adhesive side is facing up) and use the adhesive side of the cut tape to glue to each other with the adhesive side of the adhesive tape. The speed of sticking the ball should be slowed down slowly, not too fast, too fast and you will not be able to pull the wire. If it doesn't stick, stick a little double-sided tape on it, stick it all the time, and when that short piece of tape has a ball, then take the ball off and continue to glue.

The following are the specific steps to do if the sticky ball can't stick: wrap the ball with double-sided tapeBefore playing sticky ball, you must first wrap the small round ball inside with double-sided tape. Spray AlcoholAfter spraying some alcohol on the tape, you can start sticking from the side.

Control the strength of the sticky side of the remaining ball when the rotation of the yard, to master the strength, otherwise it is easy to break and destroy the blue.

If the sticky ball does not stick, it should be because the quality of the tape itself is not good, or the method is wrong. You can spray some alcohol source luck, or flower water, wind oil essence, and spray some hail beam water. The method is to pull apart the adhesive tape (the adhesive side is facing up) and use the adhesive side of the cut tape to glue to each other with the adhesive side of the adhesive tape.

The speed of sticking the ball should be slowed down slowly, not too fast, too fast and you will not be able to pull the wire. If it doesn't stick, stick a little double-sided tape on it, stick it all the time, and when that short piece of tape has a ball, you can be fierce, and then take the ball off and continue to stick.

I hope the above helps you If you are satisfied with me, please give a thumbs up, thank you!

1. Cut off a layer of surface, and the bottom is sticky.

2. Steam in a pot, and the solid glue will become sticky again after heating.

3. Apply some water to the solid glue.

The addition of water-soluble dyes can be made into colored solid glues of various color segments of acorn, and the transparency of the colloids can be adjusted through the appropriate amount of modifiers, so as to obtain translucent or highly transparent solid glues.