Now that the decoration carpenter is forced into the corner by a variety of finished product customi

Now all kinds of customization on the market do produce certain harm to the carpenter, because it is cheap, high-quality, and has a good quality of lacquer. But it's not about being forced into the wall, it's just up to you how you do it. There are many carpentry masters around me, some of whom are busy from the beginning of the year to the end of the year, and some of whom are looking for things to do all day long.

In fact, this has a lot to do with their usual work, otherwise the technical handmade is not very good, otherwise the attitude is poor. If you do both, don't be afraid and have nothing to do. Carpenter from the previous wooden cabinet veneer paint to the later simple engineering construction convenient ecological board, and then to the current many home decoration only do decoration ceiling wooden cabinet customized products, it can be said that all step by step mechanical automation is simple, can undoubtedly be involved in the carpenter's work more and more intelligent system.

Part of the factory processing is basically replaced by equipment, in other words, at least the work of carpenters in the decoration industry will be lower and lower, and it is natural not to rule out that carpenters with good reputation and strong quality are not short of things to do, but it has to be said that the direction after is certain, and most of the workers will face the dilemma of transformation and development. Renovation carpenters are less likely to be forced to the foot of the wall by customization of finished products. It's just that there are fewer people making furniture on their own than carpenters who do furniture work.

Since there are many categories of carpenters, there are carpenters, furniture carpenters, meticulous carpenters, decoration carpenters, classical building carpenters, assembly carpenters, etc.

Therefore, as a carpenter, you can carry out the transformation of technical work according to the actual situation. Generally, carpenters have the basic skills of carpenters, and it is very easy to change the type of work. Secondly, the carpenter work should be the basic and comprehensive development, and the basic knowledge and basic principles of bricklayer work and hydropower installation work also need to be mastered, from simple work to collaboration with others and even project contracting, so as to improve their overall work ability.

At the same time, it is necessary to continue to improve the quality of service and the ability to work in the world.

In fact, no matter which industry, as long as their own technology is hard enough, there is a certain development, if the perfect technology of carpentry service is also passable, there will be old customers, and then bring new customers to you to work, so carpentry technology and reputation is also very important, carpentry can also go to the furniture factory to do technical work, but also with some better decoration companies to cooperate.

I think that the survival prospects of carpentry are really not impressive, but I think that to develop a basis for their own uniqueness, their own unique level to maintain their own living environment, we can use our own uniqueness to make our jobs more.

You should improve your ability and adapt to such changes in order to have better development.

To make furniture and cabinets at home, do you want to find a decoration company to customize them, or do you want to find a carpentry master? I believe this is a question that many people are more confused about. In fact, as long as you understand the differences, advantages and disadvantages of the two, you can make a decision, and today the webmaster will talk to you

What are the advantages of a custom company?

1.There are many styles and shapes.

Customization companies have thousands of design cases in their hands, no matter what customization needs you have, customization companies can meet them one by one.

2.Standardization of contracts and services.

Looking for a custom company, the whole process is standardized, from design, door-to-door measuring tape to customization, installation, after-sales service, it is very perfect, there is a contract signed, which can protect the rights and interests of users.

3.The construction period is short and does not occupy the owner's time.

From customization to installation, it can be completed in about 30 days, no need to make it on site, and it does not occupy the owner's time.

What are the disadvantages of a custom company?

**High, taking a house of 100 as an example, the whole house furniture is customized, and it is not possible to do it without 8-100,000.

What are the advantages of carpentry master carpentry master making furniture?

1.**Cheap.

The biggest advantage of the carpenter master to make the cabinet is that it is cheap, if the decoration cost is insufficient, it is the most cost-effective to find a carpenter master to make furniture. Other than that, there doesn't seem to be much merit.

What are the disadvantages of a master carpenter making furniture?

1.The style is old.

2.The process is average.

Handmade furniture, more or less flawed, certainly not as exquisite as machine production, so in terms of craftsmanship, carpentry master furniture is not good.

3.There is no perfect service and after-sales.

Many carpentry masters do not have a perfect service process, and there is no after-sales service, and they will do it when they have a list, and they will leave after completing the order, and many things are verbal promises, and there is no formal contract.

What kind of materials are environmentally friendly? When making furniture, the materials used are nothing more than plates, glue and paint.

If there is a condition, you can use F4 level plate, such as EGGER board, which is the most environmentally friendly at present.

For glue, it is recommended to buy glue that meets the quality requirements, look for big brands, and buy expensive ones.

If you paint it, it is also recommended to use a big brand that meets the quality requirements, and it is not wrong to buy expensive ones.

It definitely can't be done. Because of the whole house customization, most of them are machine-processed, and they will definitely not be completed by manual labor.

If the carpentry technique is better, and the drawings you give are clearer and clearer, then it is possible to make the effect of whole-house customization, so if you want to make the effect of whole-house customization, you can find a carpenter with better skills.

It is not easy to achieve, the biggest difference between carpentry and customization is the difference between manual and mechanical, the customized is more exquisite, the edge sealing is very good, and there is no trace; The result of carpentry mainly depends on the craftsmanship of the master, although it is cheaper, but if you can't meet a good master, the gains outweigh the losses.

Since the advent of custom furniture, carpentry, one of the three major categories of traditional decoration, has gradually been forgotten by ordinary families. However, in our home decoration, it is still inseparable from this basic handiwork. Do you know which decoration links are related to the wood lead royal demolition work?

Do you know what stage to do carpentry? Do you know how a professional carpenter should accept Huai jujube?

1.Where do you need to do carpentry?

Perhaps seven or eight years ago, carpentry was still a much-talked about construction in the decoration industry, and in recent years, with the rise of custom furniture, carpentry has gradually become a category that consumers are not paying so much attention to, along with basic decoration.

Although traditional woodwork such as wardrobes, cabinets, wooden doors, furniture, and flooring have been replaced by more convenient custom furniture, finished furniture, and building materials, home decoration is still inseparable from woodworking, such as ceilings, TV background walls, and most of them will still be woodwork. In order to increase the decoration, the background wall border was made with wooden frame lines, which became almost one of the few carpentry projects that were preserved; In order to reduce the need for direct lighting, to hide the air conditioner, and even to do some beautification, the ceiling still needs this delicate handiwork. 2.

Carpentry is no longer mainstream?

Indeed, from the current point of view, the traditional carpentry is relatively backward, which is also the reason why the carpentry dismantler is gradually eliminated. For example, cabinets made of carpentry often use various man-made panels, which bring more serious household pollution; Custom-made carpentry furniture is not only unaesthetically pleasing, the construction period is long, and with the increasing labor costs, the overall cost is often higher than that of custom furniture. Therefore, unless there is a necessary part, or a small number of niche woodworking enthusiasts, most families choose to do less carpentry if they can.

3.What stage of carpentry is in renovation?

Carpentry is a part of the home decoration project, along with bricklayers and painters. Generally speaking, carpentry can be carried out after the concealment of hydropower works.

4.How to inspect carpentry?

Traditional carpentry is mostly used for wardrobes, doors and other furniture and building materials that focus on practical functions, and special attention will be paid to the design and details of carpentry during acceptance.

For example, whether the frame of the wooden door is perpendicular to the wall, whether there is a gap between the wood and the wall, and whether the door of the wardrobe opens and closes normally. Today's carpentry is mostly used for ceilings, background walls, etc., pay more attention to its decorative function, acceptance, the most important thing is to observe with the eyes, whether the shape is safe and firm, whether the lines are straight, whether the corners are smooth, whether there are obvious gaps between the carpenter and the wall, etc., the details have become an important standard for judging woodworking technology.

Yes, in many decorations, finished furniture cannot meet all decoration situations. The existence of decoration carpentry can allow us to better realize our needs and provide us with more personalized decoration results.

Nowadays, there are many people in the countryside who are very fond of using woodworking to make furniture, so carpentry is still needed for decoration now.

Decoration carpentry mainly does the following contents: ceilings, partition walls, door covers (including doors), window covers, installation of wooden keels (including flooring), installation of baseboards, background walls (modeling), some simple furniture (including cabinets between the kitchen), etc.

Carpentry accounts for a large proportion of the cost of making in home renovation, and the technical content of carpentry production is also the largest. Carpentry engineering, which is often referred to as carpentry work in home improvement, is a sub-project in home improvement construction where materials are mainly wood products.

In woodworking engineering, the main construction projects include ceiling keel erection, wooden door and window production, wooden cabinet furniture production, TV background wall modeling, etc. In fact, wooden keels may also be used in the process of floor paving, but now floor dealers generally have floor installation services, so the floor installation is listed to learn, and it is not included in the scope of carpentry work here.

Carpentry is the most important type of work in home decoration, and the quality of home decoration effect largely depends on the level of carpentry, and its construction period is relatively long.

Carpentry work mainly includes suspended ceilings, lightweight partition walls, furniture making, door and window making, decorative door covers, decorative components, decorative backgrounds, wooden floor installation, etc.

Carpentry work requires a high level of technology, such as panel angle treatment, cabinet door production and installation, door and window production and installation, especially the production and installation of shuttle doors and shuttle windows, special-shaped decorative components production, etc., if the woodworking technical level is limited, the production of objects is either inconvenient to use, or the decorative effect does not meet the expected requirements.

Decoration carpentry strategy, the main scope of carpentry engineering.

Woodworking products bookcase, wardrobe, TV cabinet, sail shoe cabinet, cabinet, wine and hail cabinet, ceiling, background wall, decorative wall.

Wood products paint, wood products varnish, wood products solid color paint.

Precautions for carpentry entry.

When you get the designer's drawings, it's a good idea to carefully review the dimensions yourself before signing them. Under normal circumstances, the standard wooden core board is generally not installed in the elevator, and the board is best cut when buying, so as not to need to manually climb the stairs to carry it, so that the handling cost will be a lot.

Carpenters should bring their own toolbox, spike racket, workbench, air compressor and other common tools, especially the workbench must not let the decoration workers use the wood bought by the owner to customize.

Carpentry is a very important part of the home decoration process, such as cabinets, ceilings, floors, etc., all belong to the category of carpentry, so how should we supervise the work? Let me give you tips to see the key points of carpentry decoration!

1. Carpentry construction planning.

All the carpentry construction drawings need to be prepared before the construction of the project, and the construction drawings need to completely summarize the carpentry situation, materials, size, and even every detail of the whole house. The head of the household can check whether the construction drawings include: elevations, sections, plans and material descriptions, which are complete to meet the requirements of the carpentry construction drawings.

During the construction process, it is inevitable that the design needs to be changed, but the so-called "one trigger affects the whole body", arbitrary changes to the design are likely to lead to a large cost, so it is recommended to avoid changing the design.

2. Carpentry construction material handling.

Timber should try to avoid entering the site in rainy days, because the timber is afraid of whom, and the purchase of goods in rainy days may be wet during transportation, resulting in material deformation or difficult construction. The materials of woodworking construction are basically wood, if the rainy weather or typhoon weather, the material is not well preserved, it is easy to be unusable due to the moisture of the material, so the material should be waterproof.

When woodworking materials enter the site, it is necessary to pay attention to check whether the materials have cracks, moths, white wood, etc., and pay attention to the way the boards are placed, do not overly upright, and lay them horizontally to avoid bending and deformation of the boards.

Third, the details of carpentry construction.

Carpentry construction needs to pay attention to the three principles of vertical, level, right angle, if the carpentry construction does not pay attention to these three points, in addition to the appearance of the finished product is affected, the use effect will also be greatly reduced, and it is difficult to repair in the later stage, so the householder can check whether the vertical, level and right angle are standard when checking the carpentry construction process, and require the construction team to rectify.

If you choose to decorate the door with door hardware, you should determine all the hole spacing and hole diameter, the weight of the door panel should be considered, and the hinges and screws suitable for home decoration should be accurately locked.

Carpentry construction as the most home decoration materials for the project, from planning to construction need to pay more attention, see whether the construction design drawings are complete, avoid changes, materials into the field to do a good job, wood products horizontal and vertical need to note hail.