How to make your own styrofoam at home, how to make your own styrofoam at home

HomemadeStyrofoamFirst of all, you need to prepare clear glueGlycerinPour a small amount of laundry detergent into a clean container, then pour an appropriate amount of 100 ml of liquid glue, pour an appropriate amount of glycerin into it, stir it all the time, and finally add a large amount of foam, add a small amount of molding water many times until it is formed.

1. First of all, prepare the following materials: transparent glue, glycerin, laundry detergent and molding water. Pour a small amount of laundry detergent (shampoo or shower gel can be substituted if you don't have one) into a clean container, and then pour in another 100 or 200 ml of liquid glue.

After that, pour an appropriate amount of glycerin into it, and if there is no condition, you can use water instead of glycerin.

2. You can also add a small amount of pigment, which can be selected according to your favorite color, and all kinds of colored liquids and powders are available. In the process of adding materials, we must keep stirring, how to make the raw materials mix together. Finally, we add a large amount of foam and stir well, adding a small amount of molding water but several times until it is formed.

Styrofoam

Styrofoam is a necessary item for kindergarten children to paint and do handicrafts, and styrofoam can help babies learn to improve their hands-on ability. Add a small amount of water to knead first, then add a little more water to knead if it is still dry, and repeat this operation until it softens after about 20 minutes.

Cover a damp towel over the dry styrofoam and wait for a day for the styrofoam to regain humidity and become soft again. Or put the dry styrofoam in a plastic bag and soak it in warm water for half a day to soften. Or spray with a small sprinkler head with water and use plastic wrap.

Wrap it up and let it sit for a while; Or use a brush dipped in a small amount of water to brush on the surface of the styrofoam, and repeat several times depending on the degree of dryness.

Steam with water at the mouth of the thermos.

Steam it and then knead it, it is best to remove the skin that is too dry, and after kneading it thoroughly, it can restore softness. If the styrofoam is left out for a long time, it will dry out, resulting in a greatly reduced plasticity and a bad feel. To preserve styrofoam, you can put it in a plastic bag and put it in the refrigerator, where it can be stored for one to two weeks.

Glue, hand sanitizer, molding water can be used. Stir to make. If possible, you can also add some decorations.

Styrofoam is a commonly used glue that can be used to bond many different materials, such as paper, cloth, leather, and brochure plastics. Homemade styrofoam at home can be a cost-effective and easy option. Here are some simple and easy ways to do it.

Method 1: Gelatin and white vinegar.

Soak 1 tablespoon of gelatin powder in 3 tablespoons of water, add 1 tablespoon of white vinegar when it is soft, and heat over low heat. Do not stop stirring while the hot water is heating until it is ready to cool. The styrofoam is ready.

Method 2: Gelatin and sugar.

Mix 1 scoop of gelatin powder and 1 scoop of sugar, then add 1 4 purified water and stir to combine. Heat the mixture until it is completely dissolved, then leave it to cool and the styrofoam is ready. Styrofoam made in this method can be stored longer and has better stickiness, but it is likely to require more glue and will be more difficult to clean.

Method 3: Space cup and glue.

A space cup is a special type of cup that is made using a special material. Stuff some styrofoam into the cup, then add some water to the cup, which is about a third of the cup's volume. Then close the space cup and shake it vigorously to allow the styrofoam and water to mix together.

Styrofoam made in this method may be easier to make, but it is less sticky and has a shorter storage time.

Method 4: Pulp and dishwashing liquid.

Mix the pulp and dishwashing liquid together and add some water. Stir the mixture thoroughly until you get a texture similar to styrofoam. The styrofoam made by this method may not be as sticky as other methods, but it has a variety of materials that can be made by mixing them with each other, such as old newspapers, magazines, and various waste papers.

Summary. These methods are simple and easy. Each method has its own advantages and disadvantages, and you can choose your own styrofoam making method according to the quality you want.

Different methods may have different adhesion effects on different materials. Whichever method you choose to make styrofoam, be sure to keep it in a dry, warm place when storing it, just like all other glues.

Here's how to make your homemade styrofoam:

1. Pour less than half a cup of glue into the cup, then add a small amount of pure glycerin, and squeeze it into the shower gel, which can add a super drawing effect to the styrofoam.

2. Use chopsticks to stir the glue, glycerin, and shower gel in the cup until well mixed.

3. Add soda water and stir to mold, test the extensibility of the bubble glue by hand after molding, and the foaming rubber is completed.

Styrofoam is a kind of entertainment product, mainly made of glycerin, water, borax, it has the characteristics of soft, foaming and so on. Styrofoam can be used as a stress relief tool or as a toy. It is not toxic when used by children, but it cannot be used as an edible toy, that is, it will be toxic if consumed.

Pay attention to how to play

Remove the styrofoam from the box, turn it in, rub and stretch. The volume of styrofoam is increased, and more and more bubbles are generated. The ultimate goal of playing with styrofoam is to make the styrofoam produce a lot of small bubbles, making it more and more fluffy.

Remove the styrofoam from the container, press the styrofoam and you will hear the sound of the bubbles bursting.

Pull the styrofoam, and the styrofoam expands in volume. Pull the styrofoam again, and the volume expands more and more. The more the styrofoam expands, the more bubbles are produced, and the more refreshing it feels to crush the bubbles by hand.

The foaming sponge is soft and foaming, which is very practical for decompression, and can be pinched and kneaded. Change at will, the sound of poking and pinching is very comfortable and decompressive. You can watch TV and play at the same time, and exercise your arms and fingers at the same time.