How can I easily make a knife cut hole effect for a costume?

The required tool box raw materials are ready, remember to stuff the cardboard box into the trouser leg and pad it underneath, mainly to prevent the knife from cutting the entire pants through during the operation, and now you must use the knife to start making in the position where the hole needs to be broken, [Note] Be sure to draw in one direction (left to right or right to left), and be sure to draw horizontally. Don't be too strong, to prevent the horizontal white line from being cut, in fact, as long as you draw slowly, the basic horizontal line will not break, draw and draw, pay attention to the strength, don't be too big, when you draw for a while, suddenly find that the pants are scratched where there is a cotton wool-like thing, at this time remember not to be too strong, patient a little bit of stroke. Until the cotton wool is particularly abundant, it is basically not far from success.

I don't know if Tusebi has slipped his pants. Then move on to the next step. The part of the utility knife is basically completed, everyone rubs hard with their thumbs in one direction, the purpose is to get rid of all the cotton wool-like things, this step is rarely introduced on the Internet, after cleaning up the cotton wool attached to the surface of the pants, the white line leaks out, there is wood?

Of course, there are more stubborn cotton wool, which cannot be rubbed off by hand, at this time you have to pick it with a needle, pick it one by one, don't worry, good things need time to get slowly, so don't worry. It's almost the same as repeating it a few times. The last step, to show you, the horizontal white line is not broken, if you think it is not very natural after playing like this, you can directly throw the pants into the washing machine and stir it.

Basically, the effect is very natural.

Choose a position that you want to break, pad the board, take a knife and scrape it gently, pay special attention to the strength, control it well, let the knife scrape horizontally, scrape out the traces, don't tear out some lines, break it, this first time can not be in a hurry, as slow as possible, and then you have to scrape slowly along the traces left by your first knife, after a few scrapes you will find that there is some lint, that is, you scrape off the jeans, ignore these first, continue to scrape, you must not be in a hurry. When you scrape some white lines that can be seen more clearly, in fact, at this time you have completed most of the production of ripped jeans, to make ripped jeans look better, in fact, there is a more critical place, that is, carefully clean up the cotton lint that sticks to the top of the side you scrape, remember to clean it inside and outside the trouser hem, you can use your hands to slowly wipe it off, you can also use scissors to cut off some lint, but you must pay attention to it, don't cut some white lines.

Holes must first be natural, you have to choose the right position before starting, such as the thighs, knees, back pockets and other places that are easy to penetrate. If you want a bold hole, just apply scissors, cut out the desired shape, and then use sandpaper or board brush to polish the edges to disguise the effect of natural wear. If you don't want to expose the flesh directly, there are different hole styles you can choose from.

If you want to find a rough stone with a rough feeling, just put the fabric Mo Lan directly. I like the low-key and delicate cat's claw effect, and use a knife to cut horizontally where the hole needs to be broken, and cut the vertical line and keep the horizontal line. I like to "open my smile" type of hole, cut directly on the jeans, and then use a needle to pick out the raw edges and it's done.

I used to have a pair of pants that I didn't like to wear, but they were very expensive when I bought them, so I researched the ripped pants that are now popular, and I will tell you how to do it, using scissors to cut a slender hole in the knee area of your jeans (or wherever you want to make a hole). Tearing the opening to your desired width by hand is more natural than if we were to cut it directly with scissors. Use scissors to make some smaller cuts near the edge of the original large opening to create a friction effect.

Repeat step 2 with your hands to tear out the small incision for a natural effect.

Cut off the bottom of the jeans to create a gradient effect after washing, mark the knees, and then cut the top and bottom of the knees. Fold the pants in half, cut them from the middle according to the marked place, the opening should not exceed the center line of the jeans, do some treatment on the cut opening, and cut a few horizontal lines parallel to the opening, which looks more natural. Use forceps to remove the blue thread and leave the white thread behind.

After the incision is processed, wash the jeans. Then get ready to enjoy your "new jeans".

Use a ballpoint pen to draw a mark where you want to cut. Cut along the position with scissors. Use a utility knife to make it in the desired position, pay attention to draw in one direction, left to right or right to left, and be sure to be horizontal, not too strong, to prevent the horizontal white line from being separated, in fact, to draw slowly, basically the line will not break.

If you want to pursue novelty, you can also make your own ripped jeans. Quite simply, we can take out our jeans that are stained and make sure the stains are not particularly large! Otherwise, the hole is too big and it doesn't look good.

The ripped jeans made in this way are both new and beautiful, and at the same time, you don't have to worry about being the same as others!

Use sandpaper to rub the hole where you want it. Use a paper cutter to cut along the line, find the texture of the pants, and be careful not to cut the horizontal pattern. Use tweezers to pick off those horizontal lines one by one, and here you must be patient with gray dripping, and be sure to pick them one by one.