If you want to take off the aluminum alloy screen, how should you take it?

Introduction: Every household will install an aluminum alloy screen window on each window when decorating the home, because it can block some insects from climbing indoors, and in the spring, everything recovers, many plants will grow new young leaves, and the wind is also very strong, which can blow some debris produced on the tree into the room, and the screen window can effectively block, such as catkins. After a long period of use, the aluminum alloy screen will also become very dirty, so if you want to take off the aluminum alloy screen for cleaning, how should you take it?

Most of the windows at home are installed from the inside when installing aluminum alloy screens, so it is very convenient for everyone to take them down, you only need to move left and right to find a suitable angle, such as lifting the screen window up, and there will be a distance between the card slot of the window below, and then take it out diagonally, and it will not use too much force when taking it out, so whether there are men, women and young people in the house, you can often take it out and clean. <>

Aluminum alloy screen, because of long-term use, there is a lot of dust in the air will fall on it, and in the spring when the catkins sprout, these catkins are scattered everywhere because of the wind, and the screen windows are also very effective in blocking them outside, after all, if this catkins suck into the human body, the harm to people is still very great, in summer, especially at night, there are a lot of insects, if these insects crawl into the house, it is easy to make some people very afraid, and if they bite people, they will also cause harm to the human body, Then after installing aluminum alloy screens, this phenomenon can be well reduced. <>

After you take off the aluminum alloy screen, you can clean it, after all, there is still a lot of dust on it, if the time is relatively long, the aluminum alloy screen will also be very poor quality due to weathering, for this case, you can buy a new aluminum alloy screen, so as to effectively block some debris outdoors.

There will be some screws around, unscrew the screws on them and push them up and down, and then you can remove them, but for the sake of safety, it is still handed over to some specialized thread removers.

You can use the key to open the screen first, then press the switch of the screen, and finally grab the switch to remove the screen.

Some screws around the aluminum alloy should be unscrewed, and then the aluminum alloy screen window will be easily taken down, if you can't take it yourself, it is best to ask a professional master to help.

Generally, the sliding window glass sash and the gauze fan have a cover, and they should be removed, and some have screws on the back of the cover, and the screws are removed and knocked down in the opposite direction with a leather hammer.

A screwdriver should be taken. Use a screwdriver to unscrew the fixed screws so that they can be removed.

One side should be tilted first and then pulled out forcefully, as only then can it be better removed.

In fact, it is very easy to take, because there are certain ways and means, but we must take it according to the rules, otherwise it will be destroyed.

The only thing that can be easily removed from the aluminum alloy window is the sash, and the window frame is installed with strict wind resistance regulations, so it is installed very firmly. The window frame cannot be easily removed, and the window frame can only be removed by destructively removing the connecting parts that fix the window.

For easy removal of the sash, the steps are as follows: the first step is to remove the anti-drop block in the chute on the sliding sash, and then hold the sash up with both hands to lift the sash, and the sash can be easily removed.

If it is a casement window.

Put the hinge that connects the sash.

Or remove the screws on the four-link and you can easily remove the sash. One point here must be emphatically reminded, that is, to remove the casement sash, the sash must first be fixed with a rope to prevent the sash from falling suddenly after the screw is removed.

There are 3 steps to remove the sliding screen.

1. First of all, push and pull the window screen to the middle of the window to ensure that there is a certain amount of activity on both sides.

2. Face the window and hold the middle and lower part of the screen frame with both hands. If the sliding window is too high, you will need to step on a stool, but the window should be closed to prevent accidents.

3. Use both hands upward at the same time, and after the screen is moved up, maintain the upward strength and pull inward, so that the lower part of the screen is off the track and can be easily removed.

Generally, the screen window of the casement window can be dismantled according to this step:

1. Prepare two one-word change cones.

2. Open the window sash, look at the two corners under the screen frame, and use the cone to take the window as the fulcrum and tilt it upward.

3. The screen window moves up as a whole, and after the lower edge and the window leave the gap, put the taper into the gap, and grab both sides with both hands, then the screen window will be removed as a whole.

This casement window embedded in the fixed screen window, just up and down stuck on the window frame, when dismantled, it is also up first, the lower part can be removed after detachment, when installing, it is also installed first, after putting it on, press it down, even if it is tightened.

1. When you open the window, you can see that there is a handle under the screen window frame.

3. Pull the handle up (if it is a locked window frame, you can use the key to open the keyhole below).

3. After the lock is opened, hold the handle and pull it up, and the bottom of the window frame is lifted, and there is a distance between it and the window frame.

4. At this time, you can directly remove the window frame of the screen, and the window will become a blank position, and you can reach out directly.

How to take it off:

First, push the screen window to the middle of the plastic steel window frame.

Then lift the screen window frame upward, lift the bottom of the screen window away from the plastic steel window frame, and it can generally be taken off.

If it is not easy to separate, you can bend the screen window frame slightly and then lift it away from the plastic steel window frame.

Generally, the distance between the top and bottom of the middle is larger than the distance between the two sides, and the screen window can generally be removed according to the above steps.

Pull to the side and remove diagonally.