How many degrees can the minimum water temperature be set for gas wall hung boiler heating?

<> gas heating wall-hung boiler.

It is designed according to the working conditions of high temperature water supply and low temperature return water with large temperature difference (20) and small flow, and the standard working conditions of European gas heating wall-hung boiler are generally 80 for water supply and 60 for return water, while low-temperature hot water floor radiant heating requires large flow and small temperature difference to operate. In winter, the indoor temperature of the wall-hung boiler is set to 20 is the most suitable. If the heating temperature standard is set according to the standard, the winter heating temperature standard is between 16 and 26, and the temperature that takes the middle value and people feel most comfortable is 20.

According to the "Technical Regulations for Ground Radiant Heating", the supply and return temperature of the low-temperature hot water ground radiant heating system should be determined by calculation, and the water supply temperature should not be greater than 60. Civil.

The water supply temperature should be 35 50, and the temperature difference between the supply and return water should not be greater than 10. Generally, the floor heating is 50-60 degrees, and the radiator is slightly higher by about 70 degrees, so that the indoor temperature can basically reach about 20 degrees.

When the wall-hung boiler uses the underfloor heating mode, it is more appropriate to control the outlet water temperature within 60, and use radiators.

When the water temperature is set to about 80. When the outdoor ambient temperature is higher than the water temperature, it is recommended to lower it appropriately.

In winter, when the outside temperature is relatively low, the water temperature can be appropriately high.

Look at the brand, some brands have the lowest temperature, 16 degrees, some are 15 degrees, and according to the brand, its minimum setting temperature is also different.

Of course, if you have a wall-mounted stove, the minimum temperature is usually 17 or 18 degrees. From the perspective of our lives, it should be very normal.

How many degrees can be set at the minimum water temperature for gas wall-hung boiler heating, if it is floor heating, the temperature of the heating water should not exceed 60 degrees, and the temperature of the radiator heating water should not exceed 70 degrees.

2. It is quite convenient for users equipped with wall-hung boiler thermostats to set the temperature, and the room temperature of how many degrees is needed can be accurately set directly through the thermostat;

3. Users who do not have a thermostat need to adjust the wall-hung boiler according to the actual situation of the room to control the water temperature of the floor heating or radiator and other heat dissipation terminals, under normal circumstances, the water temperature of the floor heating should be set to 40 50, and the water temperature of the radiator is set to 50 60

The minimum water temperature of gas wall-hung boiler heating should be set to 40 degrees, if it is lower than 40 degrees, then the water released basically does not have much temperature, so we should try to set the temperature to about 45 degrees, so as to ensure that the temperature of the water is more suitable, and children should prevent scalding.

The minimum temperature of the wall-hung boiler is the lowest gear, which is about 8 degrees. When the general staff is not at home, the wall-hung boiler can be adjusted to the lowest setting, which can save energy and will not freeze the heating system.

Gas wall-hung boiler heating can generally be set at a temperature of 50 degrees, if the temperature is too low, the radiator will be very low, and the house will not be warm.

However, the gas wall-hung boiler is generally designed with a domestic hot water temperature of 30-60 degrees and a heating temperature of 30-80 degrees, so the minimum water temperature for gas wall-hung boiler heating can be set to 30 degrees.

How many degrees can be set at the minimum of the gas wall-hung boiler, and the minimum water temperature is set at 50 degrees for various wall-hung boilers.

Generally, the minimum temperature of the wall-hung boiler design is set to about 21 degrees for the best, otherwise it will affect the life of the wall-hung boiler.

The minimum water temperature of gas wall-hung boiler heating can be set to 30 degrees, and no matter how low it is, it will lose the meaning of heating.

It is more reasonable to use a wall-hung stove for heating, and the indoor temperature is set at 18-20.

The temperature of the gas furnace can be adjusted, for example, it is not recommended to adjust to the lowest temperature of 35 degrees or 40 degrees, which is not conducive to hot water circulation.

If it is floor heating, the temperature of the heating water should not exceed 60 degrees, and the temperature of the radiator heating water should not exceed 70 degrees.

There is no limit to the minimum temperature of gas wall-hung boiler heating, but if the temperature is too low, the temperature in the house will not meet certain requirements, and there will be no heat.

It is best not to exceed 60 degrees for floor heating and 70 degrees for radiators.

You don't need to set this up, just ventilate, turn on the electricity, and turn it off. It has a cryogenic protection function and it works automatically every once in a while.

The gas wall-hung boiler cannot be used for heating, it can only be used for laundry, washing vegetables, bathing ......!

The temperature of domestic hot water in wall-hung boiler is usually 30 to 60 degrees, and the heating temperature is 30 to 80 degrees, so the minimum temperature of heating will be set at 30 degrees, and the temperature of hot water is also at 30 degrees.

Natural gas wall-hung boiler is generally designed with a domestic hot water temperature of 30-60 degrees and a heating temperature of 30-80 degrees, so the lowest heating temperature is 30 degrees, and the lowest domestic hot water temperature is 30 degrees.

The temperature of the domestic water of the gas wall-hung boiler is set at about 30 degrees to 60 degrees, and the heating temperature is set at 30-8o degrees, so the minimum temperature of the gas wall-hung boiler heating is set at 30 degrees.

If any wall-hung boiler is set to a temperature, if the temperature is high, it can affect the overall life, but if she is also low, the heating effect can not be started, the minimum temperature of the general wall-hung boiler design is set to about 21 degrees for the best, otherwise it will affect the life of the wall-hung boiler.

The wall-hung boiler is a modern heating system, and the specific method of use is actually very simple. As long as you pay more attention to safety during use and adjust the water temperature of the wall-hung boiler to the most suitable state, you can easily enjoy a comfortable life. When the wall-hung boiler adopts the floor heating method, the water temperature should be controlled within 60, and when the radiator is used, the water temperature is adjusted to about 80.

When the outdoor ambient temperature is higher than the temperature of the air outlet, it is recommended to reduce it appropriately. When the outdoor temperature is low in winter, the outlet temperature can be appropriately increased.

1.If floor heating is used, the outlet water temperature shall not exceed 60 degrees, and the radiator heating shall not exceed 70 degrees. If the user wants more precise and convenient temperature regulation, it can also be used in conjunction with a wall-mounted boiler thermostat to precisely adjust the desired temperature.

Users who do not have a thermostat need to adjust the temperature of the wall-hung boiler according to the actual situation of each room, and control the radiator terminal outlet temperature of the floor heating or radiator. In general, the outlet temperature of floor heating should be set at 40 50, and the outlet temperature of radiators should be set at 50 60.

2.When sleeping at night, don't set the heating temperature too high. Setting the heating temperature of the room at around 15 can not only save gas costs, but also be more beneficial to human health.

Finally, if there is no one at home, there is no need to turn off the wall-hung stove. Otherwise, you can turn on the wall-hung stove when you get home. Due to the large temperature difference between indoor and outdoor, the wall-hung boiler needs to be operated by large fire, wasting energy.

It is recommended that when you go out, set the wall-hung boiler at the lowest temperature, so that the boiler will burn intermittently, and it will be cold when you get home, which can also achieve the effect of energy saving.

3.When using a wall-hung boiler, avoid contact with flammable materials. When using a wall-hung boiler, be careful not to go near flammable materials.

For example, try not to use flammable liquids and gases. Only in this way can the wall-hung boiler be safe. Do not use the wall-hung boiler without permission.

When using a wall-hung boiler, be sure to pay attention to: if something happens during use. You must ask a repairman to repair it immediately, and you must not repair it yourself.

Because that will bring more damage to the wall-hung stove.

The water temperature should be set to about 40 degrees Celsius, which will increase the temperature in the house and the air will not be too dry.

In the north, many homes use heating to heat, and the wall-hung stove is used to burn the radiator for heating, so that the water temperature is more suitable to 26-28 degrees, and it will be too dry if it is adjusted too high.

This should be set at 30 45 degrees Celsius is the most appropriate, because after the radiator reaches this temperature, the air temperature in our room can be well increased by about 6 7 degrees, which can make people live very comfortably, and the overall temperature of the room is comfortable and not dry.

It is more reasonable to use a wall-hung stove for heating, and the indoor temperature is set at 18-20.

If the temperature is set too high, not only will the moisture in the indoor air evaporate, but the indoor environment will be particularly dry; At the same time, from the perspective of energy saving, the high temperature makes the wall-hung boiler work at high load for a long time, and the gas cost will also increase significantly.

The wall-hung boiler has a powerful heating function, which can provide personalized heating and provide high-flow constant temperature domestic hot water. However, the heating function of the wall-hung boiler will only be activated in winter mode, so the first step in setting the winter heating temperature is to adjust the wall-hung boiler to winter mode.

Usually the room temperature is between 18 and 24 and the humidity is 50% to 60%, when the human body feels most comfortable. The indoor temperature standard for central heating in winter in China is set according to this. The national "Design Code for Heating, Ventilation and Air Conditioning" stipulates that the standard indoor temperature for central heating is 18 2.

Therefore, it is advisable to set the floor heating temperature at 23 27.

Floor heating is mainly divided into water floor heating and electric floor heating two kinds of front vertical, according to the "JGJ142-2004 Ground Radiant Heating Technical Regulations", water floor heating is based on the temperature of no more than 60 hot water as the heat medium, heating pipe circulation flow, heating the entire floor; Electric underfloor heating is to bury the heating cable with an upper operating temperature of 65 in the floor, and use the heating cable as the heat source to heat the floor.

The warm temperature of the ground repentance pants gradually decreases from bottom to top, and it is just a more suitable temperature when it reaches the surface of the human body.

The temperature setting of the gas wall-hung boiler for floor heating water should be adjusted according to the actual needs and environmental conditions, and it is generally recommended to return to the rock between 35 -45. This temperature range can not only meet the heating needs, but also achieve a more ideal energy-saving effect.

Specifically, if the temperature is set too high, it will cause the gas wall-hung boiler to be continuously heated, which will increase energy consumption and usage costs; If the temperature is set too low, it may not be able to meet the heating needs, causing unnecessary discomfort.

It should be noted that the Wenshizhou setting is not the only factor that affects the energy saving of the gas wall-hung boiler, and there are other factors such as indoor and outdoor temperature, house insulation performance, etc., which will affect its energy-saving effect. Therefore, when using gas wall-hung boilers for floor heating, it is also necessary to make reasonable use of house insulation measures, maintain good ventilation and air flow, etc., in order to truly achieve the purpose of energy saving.

The minimum temperature of the wall-hung boiler is the lowest gear, which is about 8 degrees. When the general personnel are not at home, the wall-hung boiler can be adjusted to the lowest setting, which is energy-saving and will not freeze the heating system. It can be adjusted according to the weather temperature, environment and human comfort.

The precautions for using a hanging fireplace are as follows:

1. Keep away from combustibles: The wall-hung boiler needs to be installed in the area far away from combustibles, and special attention must be paid to avoid some combustible gases and liquids during use, so as to ensure the safety of the wall-hung boiler to a great extent.

2. Pay attention to cleaning: the wall-hung boiler needs to be cleaned during use, the wall-hung boiler is used in the last period, there will be impurities inside, if you do not pay attention to cleaning, it is easy to affect the service life of the wall-hung boiler, it is best to ask professionals to descale and clean.

3. Avoid freezing: When using a wall-hung boiler in winter, it is easy to freeze, especially if it is not used for a day, it will freeze, so it is necessary to turn on its anti-freezing function, or drain all the internal water when not in use, which can effectively avoid freezing.

The indoor temperature is recommended not to exceed 25°, or even 22° is enough; The temperature setting of the wall-hung boiler should be 70 to 75°. If you go to work during the day, the indoor temperature can be adjusted to about 12°, and the temperature of the wall-hung boiler is below 30°, and you can adjust it up when you get home.

The indoor temperature of the wall-hung boiler should be adjusted to about 15. If you are not at home, it is best to keep the wall-hung boiler on the lowest setting, that is, around 8 degrees.

Answer: About heating wall-hung boilers.

I think the domestic hot water temperature setting is very simple, you only need to have a certain understanding of the icon on the control interface of the wall-hung boiler and an understanding of some valves, the specific method is as follows.

A basic introduction to the control interface of the wall-hung boiler.

The current operation interface of wall-hung boilers is almost the same. There will be a switch button, a reset button, a menu button, an up and down adjustment knob or button, and a make-up valve switch, as well as a pressure gauge and an LCD screen.

So what do they do?

First of all, we should press the power button to let the wall-hung boiler automatically enter the self-test program, wait for about 10 seconds, the wall-hung boiler will enter standby mode or appear before shutting down.

If the wall-hung boiler is wrong, such as the pressure is low, the water supply valve should be replenished to restore the pressure to between 1-2 of the pressure gauge scale.

Then, look at the LCD screen of the wall-hung boiler, whether there is a faucet icon display or directly turn on the hot water file of the faucet, and observe whether the display of the wall-hung boiler has a faucet icon. If it is a radiator shown.

icon (some say like a fence or a staircase), we're going to do a mode shift. Press the menu button, if it is winter, the home needs to have heating and hot water, to set to the snowflake icon, that is, the winter mode, at this time the wall-hung boiler will have the function of heating and domestic hot water.

If the winter is over, you only need to press the menu button, select the sun icon, and the wall-hung boiler will automatically turn off the heating function, and only retain the function of domestic hot water.

How to regulate the temperature of domestic hot water.

When the faucet icon appears, you can directly use the up and down keys to set the temperature, and then select the temperature and press the OK button; In winter, I recommend setting it at 40-50 degrees Celsius, and in summer I recommend setting it at 40 degrees Celsius.

The water temperature setting of domestic hot water will also determine the output and energy consumption of hot water, and there may be a failure of the wall-hung boiler due to the temperature setting being too high.

Take the kilowatt heat-based wall-hung boiler as an example, when the temperature difference between the tap water temperature and the preset temperature is 30 degrees, for example, when the tap water temperature is 10 degrees and we preset 40 degrees, it can provide 14 liters of hot water per minute, which can only meet the needs of one shower and one faucet at the same time; If the water temperature difference is 25 degrees, it can provide more than 16 liters of hot water per minute, and it can meet the needs of two bathrooms for bathing at the same time.