How to adjust the damper of Vantage cooker?

Vantage. The method of adjusting the damper of the stove is as follows: close the damper of the gas stove to the minimum, observe the color of the flame and the size of the fire, and then adjust it to the maximum for observation. It is better to have the strongest firepower and the bluest flame.

Hold up the gas stove by hand, and there are two iron plates (or knobs) with handles at the junction of the burner and the nozzle to adjust the size of the flame; All of them are tightly attached to the burner by springing, and the size of the air inlet can be adjusted by gently toggling the handle, so as to change the state of the flame.

When there is a yellow fire or black fire in the gas stove; When the gas stove has combustion noise, backfire and other phenomena; The damper is too large, the amount of air is too much, and the gas stove cannot catch fire; If the damper is too small, the gas stove is prone to red fire and incomplete combustion. If there is only gas, it is not well mixed with oxygen in the air.

The damper of the cooktop is generally at the bottom of the stove. As far as I know, Vantage's cooktops seem to be basically external paddle damper adjustment devices. This kind of adjustment is very convenient, you don't need to lift the gas stove, you only need to move the paddles back and forth.

Generally, the master will help you debug it when installing, if there is a yellow fire, no fire in the outer ring, tempering, etc., you can adjust the damper to try, first adjust it in one direction, if the situation improves, please continue, know the ideal, if the situation is worse, then try the reverse until the ideal.

Summary. How to adjust the damper of Vantage cooker? Hello dear!

There are a total of 5 gears from the middle (wide open) to the left or right of the damper opening, and when adjusting the damper, pull the damper handle to the middle of the cooker about 1mm and then toggle it. When the yellow flame is yellow, dial it to the *** (maximum air inlet position), open the air inlet, and increase the amount of air introduced until the flame is normal. When leaving the flame, de-firing or back-tempering, turn the damper to the left or right, close the small air inlet, and reduce the amount of air introduced until the flame is normal.

Hope it helps!

How to adjust the damper of Vantage cooker? Hello dear! There are a total of 5 gears from the opening of the damper from medium (wide open) to left or right, and when adjusting the damper, please pull the handle of the wind cong and the door to the middle of the stove by about 1mm and then toggle it.

When the yellow flame is yellow, dial it to the *** (maximum air inlet position), open the air inlet, and increase the amount of air introduced until the flame is normal. When leaving the flame, de-firing or tempering, turn the damper to the left or right, close the small air inlet and conceal the concealment, and reduce the amount of seepage and small air introduced until the flame is normal. Hope it helps!

Hello, dear, thank you for your patience, the answer has been found for you, you check it, thank you!

Vantage gas stove damper is adjusted by adjusting the handle, some brands of machines do not have dampers, and they can't adjust it themselves, so they can only adjust it by after-sales personnel. The size of the fire power adjustment of the gas stove is realized by adjusting the size of the knob; The damper of the gas stove is used to adjust the mixing ratio of gas and air to ensure that the gas is fully combusted.