Is it possible to install a wall mounted air conditioner with a plug board?

Hello, I'm glad to answer for you, and I'm sorting out the answer for you One Horse is totally fine.

Generally, for a horsepower air conditioner, an ordinary socket is fine, but there will be potential safety hazards, because the air conditioner is an electric appliance, its starting current is more than 3 times the rated operating current, and if the air conditioner has an auxiliary electric heater, the power will be greater, so there will be certain risks and hidden dangers, and it is not recommended to use ordinary sockets.

I hope mine can help you.

It is best not to use a power strip for the air conditioner. Air conditioners are high-power household appliances, and the current is large when they work, and the socket used is a 16A special socket matching and power cord for air conditioners. The wiring board generally does not meet this requirement, so the use of the wiring board is easy to cause local heating and burning, which is dangerous.

At present, in China, air conditioners generally use 250V 16A sockets, and drum washing machines, microwave ovens, electric water heaters, and induction cookers generally use 250V 10A sockets; Refrigerators, washing machines, televisions, electric cups, and computers generally use 250V 6A sockets, and the socket sizes of 6A and 10A are the same in terms of socket size, and the size of 16A sockets is different.

Reserved air conditioning socket for decoration.

The air conditioning socket is what we often call the special socket for air conditioning, as the name suggests, this is a special socket specially designed for air conditioning, this socket and ordinary socket actually do not look much different. It's just that when the air conditioner stops working, the air conditioner socket will not supply power, and the power supply will only start when the air conditioner starts working next time. The location of the reserved air conditioner socket for decoration, according to the different types of air conditioners, the height reserved for the installation of the socket will also be different, as follows:

1. Cabinet air conditioner: Generally, the cabinet type is mostly installed in the living room, and the general cabinet socket is generally grounded, so the reserved height for the installation of the cabinet air conditioning socket in the living room is 300mm from the ground.

2. Hang-up air conditioner: The bedroom is generally a hang-up air conditioner, and its socket is generally installed at a similar height as the air-conditioner, so the reserved height of the hang-up air-conditioning socket is 1800mm.

Decoration reserved air-conditioning hang-up position.

The location selection of the unit in the air-conditioning shed should consider the height of the unit and the size of the passage into the room during installation, so as to avoid the inability to install. It is necessary to have a good air supply state and airflow organization, so that the air conditioner and the cold (warm) air can be blown to all corners of the room in a large area. The basic installation requirements are as follows:

1. Location: The position of the indoor unit of the air conditioner should avoid the installation of curtains, and should not be installed on a wall with curtains, but should be placed on the adjacent side wall. The position control method of the hole is 5cm away from the wall where the machine is located (before plastering) to ensure that the refrigerant pipe does not bend out of the wall as much as possible.

2. Height: The bottom of the hang-up hole is 2300mm from the ground in the future, and the bottom of the cabinet hole is 50mm from the ground in the future, and the socket position should correspond.

Can an air conditioner be plugged into a power strip.

If the usage of the air conditioner is lower than the maximum power of the power strip, then it can be plugged into it, but if it is higher than the upper limit power of the patch strip, it cannot be plugged into it. Because if it is used in this case, it is easy to cause short circuit and other phenomena such as circuits, and even cause safety accidents in serious cases. Therefore, it is not recommended to plug the air conditioner into the power strip, and you need to use the special socket for the air conditioner.

Precautions for the use of air conditioners.

1. Positive and dry keys are purchased and used reasonably.

In the process of choosing an air conditioner, we should combine it with our own needs. Whether it is the appearance of the air conditioner or the number of horses of the air conditioner, as long as consumers buy the right one, they will not feel wasted in the future use or the number of horses is too small and consumes very electricity. Of course, this is entirely a low-carbon, rational use of air conditioning.

Especially for novice air conditioners, it is necessary to learn how to use air conditioners more energy-saving.

2. The sealing degree of the room should be done well.

If the air-conditioned room is not airtight enough, then the maintenance structure of the room must be improved. Especially for the poor structure of the doors and windows of the departmental room and the large gaps, it is advisable to carry out appropriate acute improvement. For example:

Thick curtains are used and the curtains are as dark as possible, which can reduce the effects of radiation on the human body and reduce the loss of cold air. In addition, we should open fewer doors and windows to avoid heat from outside the room and also help save money on electricity bills.

3. Turn off the air conditioner 10 minutes in advance.

Before you are ready to go out, you should turn off the air conditioner, and it is best to turn off the air conditioner 10 minutes before leaving home, which can save the effect.

Yes, but before inserting the air conditioner, you need to make sure that the ceiling is securely installed and has enough load-bearing capacity to support the weight of the air conditioner. Since the weight of the air conditioner will be large, therefore, enough strength and space should be reserved when installing the plug board so that the air conditioner can be firmly fixed after installation.

Hello, I'm glad for you, the plug-in board is connected to the ceiling is not allowed to plug in the air conditioner, in case of a short circuit in the circuit, it will lead to **flower and then**.

Utility boards can be used for air conditioners, but there are a few things to keep in mind:

1.The current of the air conditioner is large, so it is recommended to use a power strip with better quality and strong current carrying capacity. Choose a wiring board that meets the national standard and ensure that its maximum current carrying capacity is greater than the rated current of the air conditioner.

2.The socket of the wiring board and the plug of the air conditioner should be matched. Minimalist air conditioners usually use 16A or 20A plugs, so you need to choose the corresponding size of the outlet.

3.Try to avoid using the same power strip at the same time as other high-power appliances. Because the current carrying capacity of the power strip is limited, if multiple high-power appliances are used at the same time, it may lead to excessive current and increase safety risks.

4.When using power strips, make sure their surroundings are dry, well-ventilated, and protected from direct sunlight. The wiring board will heat up during use, and maintaining a good heat dissipation environment can reduce potential safety hazards. Touching the mountain skin.

5.It is recommended to install a special socket for air conditioning. If you don't have an aircon outlet reserved, you can use a power strip to convert from a wall outlet, but make sure that the aircon power cord is long enough and that the power strip is in a fixed position to avoid damage caused by cable dragging.

In conclusion, air conditioners can use power strips, but you need to pay attention to the current carrying capacity and safe use. It is recommended to use a dedicated outlet for air conditioners whenever possible to ensure safe and stable electricity**.

In general, the air conditioner should be plugged directly into an electrical outlet instead of using a power strip. This is because air conditioners are more powerful and usually require separate power outlets to meet their power needs.

Using a power strip to connect an air conditioner may cause the following problems:

Safety hazards: The power of the air conditioner is large, which may exceed the load capacity of the wiring board, resulting in safety problems such as overload and short circuit of the wiring board.

Unstable power supply: The power cords and outlets of the power strip may not provide sufficient stable power** to affect the normal operation of the air conditioner.

In order to ensure the safety and normal operation of the air conditioner, it is recommended to plug the air conditioner into a dedicated power socket, and it is best to use a separate socket to avoid sharing the same sock seat with other high-power electrical appliances. If you need additional outlets, it is advisable to have an electrician install additional electrical outlets to meet the power needs of the air conditioner.

Yes, but it's still average, and it is recommended to plug it directly into a fixed position. After all, the air conditioner is just there.

It can be used, but it is better not to use a drag strip.

Because the air conditioner is an electric appliance, the starting current at the moment of starting is far larger than the maximum operating current value, and the use of the drag wire plate causes the physical contact resistance of the power supply line to become larger, and it is easy to be electrocuted due to excessive contact resistance and local sharp heating and burning, so that there is a danger of electricity use. Even if you must use a drag strip, you must also use the regular products of regular manufacturers, and it is not recommended to use the power socket of the three-no product.

The ideal state of electricity consumption is that the power socket of the air conditioner is fixed on the wall, which can minimize the contact resistance in the air conditioning power supply line, and can also discharge a lot of hidden risks. The minimum power socket of an ordinary household air conditioner should be 16A, and the power cord used should be at least 4 square national standard single-core copper wire.

Personally, it is recommended not to connect the air conditioner to the wall plug, it should be that the wall plug is not wired separately from the main switch, at least it is also connected to the wall plug of the whole room, if you really want to use the wiring board to install it on the top, it is best to buy a socket without wires, it is recommended to buy an exposed wire box and an air conditioning socket panel, and then ask the electrician to use a three-core square sheath wire directly to the socket (more plugs will produce resistance, resulting in contact point heating).

It's okay, it's okay to add wire, pay attention to the joint should be soldered with a soldering iron. You can use a high-power socket, or you can connect an air conditioning socket and the other end into the air conditioning socket on the wall.

You can use another wire, you can buy a good wire row, more than 1000 watts of a few ampere current is no problem, the wire row must be good, don't buy fakes, it's hard to say.

Recommend high-power power plug, Huntkey PSC201G