Midea s wall mounted air conditioner does not have a remote control, nor does it have a hand on butt

You can use the emergency switch, emergency switch operation instructions: after the air conditioner is powered on, open the air inlet grille of the indoor unit, press and hold the emergency switch with a sharp object, and let go after hearing an echo: "Di" sound. At this time, the air conditioner enters and automatically detects the current ambient temperature and starts running.

Namely:1The indoor unit will run automatically according to the following conditions, and the indoor ambient temperature will be controlled between 23-26. When it is below 23 degrees Celsius, it is shut down, and when it is above 26 degrees, the control refrigeration operation is reduced to 23 degrees Celsius.

2.The wind speed of the indoor unit is automatic. (high, medium and low) according to the temperature difference of the indoor temperature to control the indoor wind speed operation, when the temperature difference is higher than 3 degrees, the indoor unit wind speed into the high wind speed.

When the indoor temperature difference is close to 2 degrees, the wind speed of the indoor unit changes from high wind speed to medium wind speed to low wind speed.

The emergency switch is under the cover of the indoor unit, and you can see it when you open the cover.

Open the lid of the air conditioner, and you can see that the hand is turned on.

You can buy a remote control after the sale.

There is a recess on both sides of the indoor unit of the hang-up air conditioner, and the panel can be opened with moderate force in the recess position, after the hang-up panel is opened, there is a forced switch button in the lower right corner of the air conditioner (small hole, which needs to be operated with a toothpick or a small wooden stick), the first time you press it is the forced automatic mode, and the second time you press it to turn it off, and the remote control mode can be restored by using the remote control operation.

If you still have questions, you are welcome to ask questions to the company in the United States; I wish you a smooth work and a happy life!

Midea air conditioner does not have a remote control to turn on the method:

1. Open the outer cover of the inner unit when there is no remote control, and see a button called the emergency staring cover switch in a hole, just press it, the air conditioner will automatically select the mode according to the room temperature, and then press the air conditioner to turn it off.

2. It is also a good way to go to an electrical repair shop to buy a universal remote control. But when buying, ask if your brand of air conditioner universal remote control can be used. Because although the universal remote control is almighty, there are also brands that cannot be used.

3. If you hang up, there is a panel in the area where the remote control signal is received, which is generally buckled, you turn on the panel, you will see a small dot button, turn on the power, click this small dot with the tip of the pen, the air conditioner will start, and the default temperature is 25.

If your Midea air conditioner doesn't have a remote control, you can try the following methods to turn it on:1Manually press the electric coarse shirt source button on the air conditioner panel.

2.If your air conditioner is equipped with a timer switch function, you can try to press the timer switch button, and then set a time to let the air conditioner automatically turn on at the specified time. 3.

If your air conditioner comes with a remote control, you can try buying a new one, or use a universal remote to control your air conditioner. If none of the above methods can solve the problem, it is recommended that you contact the after-sales service center of Midea Air Conditioner for professional help and support.

If your Midea air conditioner doesn't have a remote control, you can try the following methods to turn on the air conditioner:

1.Look for the manual operation button: Look for the manual operation button on the comma air conditioner indoor unit.

These buttons are usually located on the panel and may be marked with different symbols, such as the power button, mode selection button, wind speed button, etc. Try to find a button that indicates power.

2.Press the power button: Once you find the power button, press it to turn on the air conditioner. Some air conditioners may require a long press for a few seconds to turn on, while others may only require a short press for early travel.

If the above methods still don't work, you can place a universal remote control in your mobile phone and find the brand you want to control (like Xiaomi mobile phones!). ）

Reason:

1. The screen appears garbled or frozen. Press the reset button to disarm.

2. The remote control mode is incorrect, or the temperature setting does not meet the boot conditions. When cooling, the set temperature should be less than the indoor temperature, and when heating, the set temperature should be greater than the indoor temperature.

3. The battery of the remote control is low, which will cause the remote control distance to be short or unable to be remotely controlled. It is recommended to remove the remote control battery when the air conditioner is not in use, and reinstall or replace it when in use.

4. The power supply is not connected or out of power, the power conductor socket is not in good contact, or the power conductor wire diameter is thin or aging.

Air conditioning maintenance during normal hours

1. Remove debris from the vent to ensure proper ventilation. Observe whether the outdoor rack is loose, and clean the outdoor ventilation grille for foreign objects. At the same time, keep the vents unobstructed.

2. Clean the surface of indoor and outdoor heat exchangers to improve the efficiency of heat exchangers. When cleaning the indoor heat exchanger, you should carefully remove the panel, scrub it with a soft rag, and use a small brush to gently scrub the heat exchanger of the internal machine, so as to achieve the purpose of removing dust and harmful accumulation of multiplying germs. However, it should be noted that since the heat sink is a thin aluminum material, it is easy to deform after being stressed, so it should be carefully brushed.

3 Clean the dirt on the filter screen. When cleaning the filter, first cut off the power supply, and then open the air inlet grille; Take out the filter, wash the filter with water or a vacuum cleaner, the water temperature should not exceed 40 degrees, wash it with a hot damp cloth or neutral detergent, and then wipe it with a dry cloth, and do not wash the filter with insecticides or other chemical detergents.

1. Check the remote control: Check whether the remote control has enough power. Check whether there are garbled characters on the remote control screen, if there are garbled characters, press the reset button to dismiss them.

Use the remote control to point at the radio, press any key on the remote control to see if it causes interference to the radio, if there is interference, it means that the remote control is normal.

2. Check the indoor unit of the air conditioner: open the outer cover of the indoor unit to check whether the 220V input power supply is normal, and start the air conditioner manually.

If the air conditioner still cannot be started according to the above methods, it is recommended to find a professional to come to the door for maintenance.

Hello, when there is no remote control, open the outer cover of the inner unit, and see a hole in the button called the emergency switch, press it once, the air conditioner will automatically select the mode according to the room temperature, and then press the air conditioner to turn off.

Check whether the power cord is normal, usually if the air conditioner has a "beep" sound, it means that the air conditioner is basically normal, if there is no sound, it is necessary to check whether the power supply line is normal, if it is normal, it may be a remote control failure.

Check whether the battery of the remote control is charged, or whether the positive and negative poles of the battery are reversed, if it is all right, it may be that the remote control is faulty.

In order to further confirm whether the remote control is faulty, you can open the panel of the indoor unit of the air conditioner when the power indicator is on, and see that there is a small black hole in the lower right of the air conditioner, which is the emergency switch of the air conditioner, put your finger in to turn on the emergency switch to see if the air conditioner is running normally, if it can operate normally, it means that it is a problem with the remote control.

If all of the above are ruled out, it is the failure of the air conditioner host, and you need to find a maintenance worker to check it.

For more information, please contact us.

1.Open the AFK panel. There is a strong switch in the lower right corner towards the air conditioner, which is a small hole.

You need to press the switch with a toothpick or a small wooden stick. When the power is off, press to turn on the automatic mode, and press again to turn off the power of the air conditioner. 2.

**Air conditioner remote control software. You can use a mobile phone with infrared function to control the air conditioner, only need a software for the remote control of the air conditioner, such as the mobile phone remote control, the mobile phone remote control wizard, the universal air conditioner remote control, etc. You can turn on the air conditioner through these software.

This method does not require a remote control, and it is very simple and quick. 3.You can also borrow a remote control or try a neighbor's or other remote control at home.

The same good ruined brand of remote control can be used universally, and you can use other beautiful remote controls to control the air conditioner at home. Sometimes you can control the air conditioner without a brand. In fact, you'll only know if you've tried it yourself.

The smart remote control function on the following mobile phone is used to control the air conditioner. Workaround:1

Turn on the "Smart Remote Control" on your phone. 2.Click on the "+" option in the bottom left corner.

3.Select "Air Conditioner". 4.

Find the beauty and click. 5.Follow the instructions and click on it when you're done "Powering Up".

6.Follow the instructions and click on "Mode" when you're done. 7.

Enter the following interface to control your air conditioner.

1. Open the hang-up panel, there is a strong switch in the lower right corner of the air conditioner, which is a small hole, you need to press the switch with a toothpick or a small wooden stick. Press the Niandong in the shutdown state to turn on the automatic mode, and press it again to turn off the power of the air conditioner.

You can use a mobile phone with infrared function to control the air conditioner, as long as you have a software for the remote control of the air conditioner, such as the mobile phone control remote control, the mobile phone remote control wizard, the universal air conditioner remote control, etc. The air conditioner can be turned on through these software, which does not require a remote control and is very simple and quick.

3. Borrow a remote control.

You can also shout to the neighbor's boy or there are other remote controls at home to try it, the remote control of the same brand can be universal, so you can use the remote control of other Midea air conditioners to control the air conditioner at home, sometimes it is not a brand can also be controlled, in fact, try it yourself to know.

The following uses the smart remote control function on the mobile phone to control the air conditioner. Workaround:

1. Turn on the "Smart Remote Control Seepage" function on your mobile phone.

2. Click on the "+" option in the bottom left corner.

3. Select "Air Conditioner".

4. Find the beauty and click it.

5. According to the prompts, click after the "Power" is completed.

6. According to the prompts, click after the "mode" is completed.

7. Enter the following interface to control your own air conditioner.

You can use the universal remote control in your phone to control the air conditioner as follows:

Operating tool: Xiaomi Mi MIX

Operating system: MIUI

Software: Universal remote control.

2. Then click the vertical plus sign on the upper left of the main interface of the universal remote control, as shown in the figure below

3. Find the air conditioning option in the design and click to enter, as shown in the figure below

4. Then find the Midea air conditioner you use in the air conditioner Yusliding brand menu, as shown in the figure below

5. After that, point the infrared port of the mobile phone at the air conditioner, and click the blue sign in the middle to connect, as shown in the figure below

6. When the universal remote control shows the remote control menu, it means that the connection is successful, so that the air conditioner can be controlled remotely.

Use the smart remote control function on your phone to control the unprecedented rental adjustment. Here's how:

1. Turn on the "Intelligent Remote Material Control" function on your mobile phone.

2. Click on the "+" option in the bottom left corner.

3. Select "Air Conditioner".

4. Find the beauty and click it.

5. According to the prompts, click Yes after the "Power" is completed.

6. According to the prompts, click Yes after the "Mode Dust Liquid" is completed.

7. Enter the following interface to control your own air conditioner.

1. Uncover the panel of the indoor unit, you will see a small circle on the right side of the machine, find a toothpick and something like it vertically and stick it in, and start it when you hear the sound of a drop, its default setting temperature is 26 degrees, which is equivalent to the automatic function on the remote control.

2. There are many kinds of Midea air conditioning products, but the controller is basically universal, so there are many and complete functions displayed, but generally only a few commonly used ones are used. Ventilation and freshness. As the name suggests, it is actively exchanged with the fresh air outside, which requires the unit to have a hardware support.

In the air conditioner with this function, when you press this button, the related equipment starts, and the high-end machine has air intake and exhaust functions, which can also be operated separately. There are also those that operate at the same time as cooling or heating. It's the same with water, but there are very few of these models, mainly for humidification, which is a high-end function.

3. You can also match an original remote control, and they will send it to you after the United States, about 80 yuan, and you can also match a general remote control, 10-20 yuan a, but it is very inconvenient to adjust the code frequently.

If Midea's air conditioner doesn't have a remote control, you can try to turn on the air conditioner manually by following these steps:

1.Turn on the air conditioner panel: First check the air conditioner's panel to see if there is a Jingbu switch button or other manual control buttons. Usually, there will be a switch button and a temperature setting button on the air conditioner panel.

2.Turn on the air conditioner manually: Press the power button on the air conditioner panel and the air conditioner should be turned on. You can try adjusting the temperature of your aircon through the temperature setting button on the same panel.

3.Set the wind speed: If you need to adjust the air speed of the air conditioner, check to see if there are corresponding buttons or control options on the panel. Depending on the aircon model, the control options will vary.

If the above methods don't help you turn on your air conditioner, then it could be another hardware malfunction or a remote control that is missing from the control panel. It is recommended that you find a professional aircon maintenance technician to inspect and repair your aircon. At the same time, try to find the original air conditioner remote control as much as possible, or buy the corresponding air conditioner remote control to facilitate operation.