The computer is stuck in 1 minute after turning on, how to use a USB flash drive to reinstall the sy

You can use a USB flash drive to make a 360 first aid disk, use the 360 first aid disk to start the computer, and use it to reinstall the system.

First of all, the U disk has to be made into a PE system (the PE system can be made with U master, Chinese cabbage, computer stores, etc.), and then press the computer hotkey to enter the U disk when booting up, and then select the system image file in the PE to install. (This is the approximate step, please follow yourself for the specific steps).

That's the hardware problem, the CPU, the fans, the memory.

Teach you how to install the system simply.

Mine is the same, the landlord is ** wrong?

If you don't understand the hardware problem, go to the nearby computer store to fix it.

Since there is no problem with the hard disk and memory after testing, and the D disk is gone, directly repartition and format the hard disk, and then reinstall the system with a verified system disk, so that the whole process can be automatically and smoothly solved The problem of the installation of the tether system can be solved. These are possible with a USB flash drive or hard disk, and the installation speed is very fast. But the key is:

It is necessary to have a system disk that is compatible with IDE, ACHI, and RAID mode installation and can be automatically and permanently activated, and can automatically install the machine hardware driver sequence, so that the system can be automatically and smoothly reinstalled throughout the process. Here's how:

1. U disk installation: ** A verified system installation disk file (ISO file), use ultraiso software to make a boot U disk to install the system, and use this system U disk to guide the start machine, you can smoothly install the system back to the source;

2. Hard disk installation: The premise is that there needs to be a Windows system that can run normally, and extract the "*" in the ISO file of **gho" and "install the system stupidly."

exe" to the non-system partition of the computer, and then run "Install the system." exe", directly press enter to confirm the restore operation, and confirm the automatic installation operation again. (Pay attention to back up the important data of the C drive before execution!)

3. **version tutorial: How to give you the detailed **version installation tutorial in this regard? Can't be attached. will be judged by the system as a violation. The address is in .........si xin zhong………Yes! Hope!

The system has been ghosted,This is stuck in the system automatic installation driver and registry stage,You can wait a lot.,Some computers are slow.,The slowest will take 1 hour.,As long as there's no error.,Just wait and see.。

C-area reformatted.

Install the new system with a different version.

Let's see if it's better.

It is recommended to reformat the hard disk and install it with a different version.

1. If there are too many boot items, clean up the boot items.

2. If there is too much software that is not commonly used, clean up the software that you don't use.

3. If there is too much garbage on the disk, please clean up the cache and junk files on the disk.

4. If there is a problem with the driver, please use the random driver disk to install the driver, or reinstall the driver on the official website.

5. If the system is unstable, reinstall the operating system, and use the original system to install it.

6. If it is caused by overheating of the system hardware, replace the fan again, clean the dust, and recoat the heat dissipation silicone grease.

7. If the computer hardware configuration is too low or the hardware is problematic, you can only upgrade the computer configuration or replace the computer hardware.

The hard disk may have bad sectors, so let's change to a solid state.