The Elantra engine clicks, and it doesn t sound when you fix it

The hydraulic ejector rod sounds.

It's cold. It was loud when it was cold.

Hot cars are basically normal, unless there is less oil.

Not enough pressure.

The engine rattle is a valve sound, and the valve sound can be checked from these aspects. One is to check whether the engine is short of oil. Second, the internal problems of the engine, the oil is not well oiled. Three dismantle the valve cover to check the valve clearance, and the intake valve 18-25 wires.

Exhaust valve 25-32 wire. The daily care and maintenance of the engine is as follows:

1. Maintenance of three filters.

The three filters are: gasoline filter, air filter and oil filter. The three filters play a role in filtering oil, gasoline and air on the automobile engine, so as to protect the engine and improve the efficiency of the engine.

The maintenance of the three filters in engine maintenance is very important.

2. Clean the crankcase of the car regularly.

When the engine is running, the oxides of high-pressure unburned gas, sulfur, moisture, nitrogen and acid in the combustion chamber enter the crankcase through the gap between the piston ring and the cylinder wall, and wear the parts for a long time, resulting in metal powder mixed together to form sludge. Therefore, it is necessary to clean the crankcase regularly and keep the inside of the engine clean.

3. Change the engine oil regularly.

Regardless of whether the quality of the lubricating oil is high or low, the oil quality will change during use, so in order to avoid the occurrence of failure, the oil should be changed regularly according to the use conditions and the amount of oil is moderate. Therefore, to maintain the engine, you must use good engine oil.

4. Clean the fuel system of the car regularly.

To maintain the engine, be sure to maintain the fuel system. Regular cleaning of your car's fuel system can control the formation of carbon deposits and keep the engine in top condition.

5. Clean the car water tank regularly.

Rust and fouling of car engine water tanks are a very common problem. Scale and rust can impede the flow of coolant through the cooling system and reduce heat dissipation, which can lead to engine overheating or even engine damage. Therefore, it is important to clean the tank regularly.

Summary. Hello, glad to answer for you.

The rattling of the valve is accompanied by a lack of strength to check the oil level, and a low oil level will cause abnormal noise. And it's powerless.

1.Because the Elantra's valve top cup is hydraulic. If there is not enough oil, the pressure in the top cup will not be enough. Large valve clearance.

2.A large valve clearance will directly cause a rattle. Moreover, the VVT fails, resulting in weakness.

3.Also check the antifreeze and gasoline pressures. The pressure of gasoline is low, and it is not strong to run.

The Hyundai Elantra suddenly ran out of energy, and the valve clicked.

Hello, I'm helping you sort out the answer to your question, please wait a moment The Hyundai Elantra engine suddenly ran out of energy, and the valve clicked.

Hello, glad to answer for you. The rattling of the valve is accompanied by a lack of strength to check the oil level, and a low oil level will cause abnormal noise. And there is no force 1

Because the Elantra's valve top cup is hydraulic. If the engine oil is not enough, the pressure on the top cup will not be enough. Large valve clearance.

2.A large valve clearance will directly cause a rattle. Moreover, the VVT fails, resulting in weakness.

3.Also check the antifreeze and gasoline pressures. Gasoline pressed the tomaline and trembled low, and he couldn't run.

It's not for any other reason.

Check the oil first, this situation is usually caused by insufficient oil or insufficient oil pressure.

The engine is shaking badly at idle.

There is no oil checked, if there is no oil, it is not checked, and the engine is seriously scrapped.

I checked the oil on the ruler for three centimeters.

If the oil is enough, the oil pressure should be measured, and the pressure is about a kilogram normal.

Oh oh good.

Summary. There is also a possibility that it is the timing of the wrong tooth, or the wrong tooth behind the camshaft, how to repair the Elantra engine click.

Hello, I'm helping you sort out the answers to your questions, please wait a moment

Hello, the sound of the engine clattering, in order to ensure that the oil pressure is normal, this situation is generally a sign that the camshaft is worn or the problem of the hydraulic tappet, and the leakage rental needs to focus on checking these two reasons.

My Elantra engine, just after changing the cylinder cushion bed, there was a dripping sound, there was no jujube trembling before the stool was removed, it was good, there was no noise at all, what happened?

There is a problem with the head gasket. The internal parts of the engine will be more or less worn.

The main thing is that before it was disassembled, it was good.

Why do you change the head gasket?

It's a car mechanic, didn't adjust the valve clearance?

The water temperature was high, and after driving for more than ten kilometers, the water in the tank boiled, causing the air conditioning compressor to stop.

I make used cars, and a month ago, I had this problem with the Elantra, and the result was that the cylinder head gasket broke, and it was fine after replacing it.

The valve of this car does not need to adjust the clearance, the cylinder gasket has a problem, the engine is high, there must be internal parts affected, mainly I drove to the repair shop and stopped there to repair, it is good, after dismantling, there is this sound.

There is also a possibility that it is the timing of the wrong tooth, or the wrong tooth behind the camshaft, and the rest is the problem of the engine itself, if I can help you, please give me a thumbs up Thank you!

Summary. Hello, normal, cold start, oil does not flow well, inside the oil pan. The oil is not lubricated, the sound of the valves, the oil is lubricated and disappears, it is normal, many cars. Cold cars will have this sound.

Hello, I have seen your inquiry, please wait for a moment and answer it for you immediately.

Hello, normal, cold start, oil does not flow well, inside the oil pan. The oil is not lubricated, the sound of the valve, as soon as the oil is lubricated, the rental tour disappears, which is normal for many cars. Bad and late sales of cold cars will have this sound.

Hello, my Hyundai Elantra, 09 years, in the morning the world bend to start a little squeaky, valves, wait for the hot car to dress up and return to the front, so that the engine can still be opened, is it normal.

The cold car squeaks, this is to check the tightness of the generator belt, whether it is aging, there is a problem, the belt is replaced.

Not this voice.

The belts have been changed.

It's in this engine that the valve sounds.

There is a cold car, and there is no big problem with a hot car, mainly because it is parked overnight and the oil lubrication is not good.

If the valve sounds, then you have to replace the hydraulic earpiece of the valve to solve the problem.

The "click" sound of a car engine is usually the sound of a valve or injector, and the canister solenoid valve also has this sound, but it is more brittle. Give some oil at idle and see if the frequency changes. If the frequency does not change, it is the sound of the solenoid valve; If there is any change in frequency, it should be an abnormal sound at the valve.

If you can't hear clearly in the car, it's not.

The "click" sound of a car engine is usually the sound of a valve or injector, and the canister solenoid valve also has this sound, but it is more brittle.

Give some oil at idle and see if the frequency changes. If the frequency does not change, it is the sound of the solenoid valve; If there is any change in frequency, it should be an abnormal sound at the valve. If you can't hear clearly in the car, it's not a big deal.

The car will have a corresponding click, one is the sound of the injectors working, one is the sound of the valve position, and there is a similar sound, which is the sound of the timing chain, but it is not the same as the click, and there is also a glagla sound. Generally, when a car starts cold, the engine will be a little louder than a hot car. As long as the sound is even, soft and not harsh, there is generally no problem.

This is because the gap between the cylinder wall and the piston is not yet optimally sized when the car is cold, and the lubrication of the oil is not sufficient. Usually, when the engine block temperature reaches around 95 degrees, the sound returns to normal. Oil causes.

Poor oil, long-term oil change, lack of oil, etc. , which can easily lead to increased friction between the valve and the guide and hydraulic tappet, which can make various sounds in the engine louder. If you are still not at ease after the above investigation, it is recommended to go to the nearest 4S or auto repair shop to confirm the cause of the failure.

What is the problem with the engine clattering.

Valve hydraulic tappets can cause engine clanging due to a short period of oil shortage in the tappet, delayed state adjustment, and increased tappet-cam clearance to the camshaft, resulting in a sound while working.

A car engine is a machine that converts other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, jet engines, electric motors, etc. For example, internal combustion engines typically convert chemical energy into mechanical energy. The engine is suitable for both generators and complete machines including generators.

Engine displacement is the sum of the working volume of each cylinder of the engine, which is generally expressed in liters. Cylinder working volume refers to the volume of gas swept by the piston from top dead center to bottom dead center, also known as single-cylinder displacement, which depends on the cylinder diameter and piston stroke. Engine displacement is a very important engine parameter, which is more representative of the size of the engine than the cylinder diameter and the number of cylinders.

Many of the engine's indicators are closely related to displacement. In general, the larger the displacement, the greater the output of the engine. Cylinder arrangement, as the name suggests, refers to the arrangement of each cylinder of a multi-cylinder internal combustion engine, which is the form of a queue for the cylinders on the engine.

What's going on with the engine clacking what is the problem with the engine clacking in 2019

It is also possible that because the fuel tank is sealed, the gasoline vapor inside will be generated due to temperature and movement, and after the pressure of this combustible gasoline vapor reaches a certain value, it will be injected into the engine by the carbon valve and burned.

Summary. The humming sound of the petrol pump means that there is a problem with the petrol pump, and the sound will disappear after replacement.

Gasoline pumps are an integral part of the fuel injection system of EFI vehicles. Inside the fuel tank of a car, its main function is to pump fuel out of the tank, then pressurize and deliver it to the fuel supply pipe.

It needs to work in conjunction with a pressure regulator to establish the required fuel pressure and ensure that the injector has a stable fuel output at all times.

There is no exact time limit for the maintenance of a gasoline pump. Some people think it's 7-80,000 km, others think it's 3-40,000 km. The simplest basis for judging is when it is broken and when it is replaced.

How can you tell if a gasoline pump is broken? Let's talk :

1.If the gasoline pump is humming, the oil pressure can be detected by the fuel pressure gauge and can be replaced if the oil pressure is too low.

2.Abnormal engine shaking accompanied by a fault light is also an indication of a malfunctioning gasoline pump.

Finally, there are the signs before the gasoline pump goes wrong: the car is cold and difficult to start, and the engine may need to be started several times; In the event of a fire, the throttle will shake and turn off, most likely caused by a clogged oil pump.

What's going on with the freshly replaced Elantra petrol pump assembly squeaking and buzzing.

The humming sound of the gasoline pump means that there is a problem with the dipstick to the oil pump, and the sound will disappear after replacement. Gasoline pumps are an integral part of the fuel injection system of EFI vehicles. Inside the fuel tank of a car, its main function is to pump fuel out of the tank, then pressurize and deliver it to the fuel supply pipe.

It needs to work in conjunction with a pressure regulator to establish the required fuel pressure and ensure that the injector has a stable fuel output at all times. There is no exact time limit for the maintenance of a gasoline pump. Some people think it's 7-80,000 kilometers, and some people think it's 3-40,000 kilometers.

The simplest basis for judging is when it is broken and when it is replaced. How can you tell if a gasoline pump is broken? Let's talk :

1.If the gasoline pump is humming, the oil pressure can be detected by the fuel pressure gauge and can be replaced if the oil pressure is too low. 2.

Abnormal engine shaking accompanied by a faulty lamp is a sign that the gasoline pump is malfunctioning. Finally, there are the signs before the gasoline pump goes wrong: the car is cold and difficult to start, and the engine may need to be started several times; In the event of a fire, the throttle will shake and turn off, most likely caused by a clogged oil pump.

The gasoline pump squeaks and buzzes when the car is idling, and it is gone without activating the key door and closing.

Is there a blockage. 06 Can the new gasoline pump assembly of Elantra be blocked?

How about the oil pressure.

I didn't test it. Then you test it.

How to test it.

Go to the repair shop and test it out.

What if the pressure is normal.

Is the oil supply pipe replaced?

If the gasoline pump is broken, what kind of fuel supply pipe will be replaced, you don't know how to drive.

Softening of the supply pipe also affects.