Can the central control display be equipped with a reversing camera?

OK. As long as Yuena's central control system supports, it is actually a matter of adding a rear camera and winding for electricity.

However, I still don't recommend that you pick it up yourself, but go to the repair shop to pick it up, because it involves trunk punching, winding has to peel off the interior shell, and the wrong central control connection will short-circuit and burn the insurance, or even spontaneous combustion.

If the system doesn't support it, just install a rearview mirror display directly, with dash cam + rear camera, **about 500 pieces.

Summary. 1. If we remove the CD player on the Hyundai Yuena car, if we don't dismantle it, go to the Internet to see the disassembly process of the Hyundai Yuena's CD player, generally there are several interior panels buckled with screws, and the screws can be seen when the interior panel is warped down;

2. Use T20 to take down the four screws on the CD player, beware of the screws falling into the car during this process, in fact, it doesn't matter if they really fall, four screws, there are three, the screws just play a fixed role.

3. After the screws are removed, gently take out the CD player, there are two plugs in the back, break the clip, and separate the wiring harness from the CD player.

4. Before installing the navigation machine, we should first install the GPS antenna for navigation, put the antenna inside the table from the co-pilot position of the car, and then put the GPS antenna vertically and stand on the far right side of the table. It is placed in a standing position because the signal is best in this case.

5. Take it for navigation, install the original plug-in method, and dock with the navigation, after docking, you should fix the long line with tape, which can prevent the wiring harness from colliding with the car when driving.

6. Then according to the original way, screw it up again, and buckle the interior panel, and it's OK.

Hello, hello, follow the steps below to install

1. If we remove the CD player on the Hyundai Yuena car booklet, if you don't dismantle it, go to the Internet to see the dismantling process of the Hyundai Yuena's CD player, generally there are several interior panels with screws, and you can see the screws when the interior panel is warped down; 2. Use T20 to take down the four screws on the CD player, beware of the screws falling into the car during this process, in fact, it doesn't matter if they really fall, four screws, there are three, the screws just play a fixed role. 3. After the screws are removed, gently take out the CD player, there are two plugs in the back, break the clip, and separate the wiring harness from the CD player. 4. Before installing the navigation machine, we should first install the GPS antenna for navigation, put the antenna inside the table from the co-pilot position of the car, and then put the GPS antenna vertically and stand on the far right side of the table.

It is placed in a standing position because the signal is best in this case. 5. Take it for navigation, install the original plug-in method, and dock with the navigation, after docking, you should fix the long line with tape, which can prevent the wiring harness from colliding with the car hall macro when driving. 6. Then according to the original way, screw it up again, and buckle the interior panel, and it's OK.