What s going on with the old computer going round and round?

1. On the login interface, press and hold the power button to turn off the computer, repeat three times, enter the recovery interface, and click "View Advanced 100 Repair Options".

2. Click "Troubleshooting - Advanced Options - Startup Settings - Restart", and then press F4 to select "Enable Safe Mode".

3. After entering the safe mode desktop, open the control panel, click "Uninstall Program", and uninstall all the hardware drivers and software installed before.

4. If you are not sure which software, you can press win+r to open and run, enter "msconfig" to enter, open the system configuration, 5. Click "General-Selective Startup", check "Load Startup Items", and then click "Services-Hide All Microsoft Services", and disable all after checking.

6. Then click "Start-Open Task Manager", disable all startup items, click OK, and finally restart the system.

There are too many running programs, and they can't run all the time, so you can run some of the software, or increase the memory and replace the system.

Either the computer has too much junk and not enough memory, or the network is not good and too slow.

The computer keeps making money, which means that your internet speed is too slow. Or maybe your computer is too old and the memory is too small. The computer should not use the wireless network, it should be the network cable.

The computer reboot keeps going in circlesSolution:1. Shut down the computer or log in to the system, keep turning in circles, at this time force shutdown, repeat three times, until the system prompts to enter the automatic repair mode;

<>3. Select an option and click Troubleshoot (reset your PC or view advanced options);

4. Under Troubleshooting, click Advanced Options;

5. Under Advanced Options, click Startup Settings (Change Windows);

6. Then click Restart to change the Windows options;

7. Then after the computer restarts, the startup setting interface appears, and we can click the F4 key to enter the safe mode; After entering the safe mode, press the win+r key combination, open the run, enter the command, press enter to confirm;

8. Control Panel Programs Programs and Functions, click on the left side to view installed updates;

9. You can see the recently installed updates, it is recommended to uninstall them first. If you have recently installed the driver, uninstall the corresponding program as required. Finally, restarting the computer can solve the problem of shutting down all the time.

Summary. 2.Repeat 2 3 times, and when you turn it on again, you will enter the blue screen recovery page.

3.Click "View Advanced Repair Options" in the lower right corner of the mouse to enter the RE mode of Win10. In the troubleshooting in the RE mode of win10, you can "reset this computer" or "go back to the previous system".

4.You can choose to reset the computer and reinstall Windows 10 once automatically, with or without keeping the existing software, applications and data.

Hello, glad to answer for you. Dear, the reason why the computer screen keeps spinning in circles; 1.Incompatible programs or hardware drivers.

After turning on the computer, you will see and accept the windows10 logo, and there is a circle under it when it is turning, count 5 seconds. Then directly press the power button of Paitong and never turn it off. For desktops, if there is a "reboot button" on the chassis, you can also press the reboot button directly, but there are users.

2.Repeat 2 3 times, and when you turn it on again, you will enter the blue screen recovery page. 3.

Click the mouse in the lower right corner to "view advanced repair options", you can enter the RE mode of win10 before transporting. In the Troubleshooting in the RE mode of Win10, you can "re-accept or place this computer" or "go back to the previous system". 4.

You can choose to reset the computer and reinstall Windows 10 all of it, with or without keeping the existing software, applications and data.

Hope the above helps

Dear, I wish you a happy life and all the best <>

If your problem has been solved, you can click "End Crack Key Service" in the upper right corner and give 5 stars to get 1 consultation coupon. If you have no questions, you can leave a message or ask me a question again

<> start the win10 computer, the login window has been showing a circle, can not be successfully turned on, at this time long press the power button, the host will shut down, and then press the power button to start the computer, that is, it will enter the automatic repair mode.

If you can't fix it by yourself or with it, click on the rightAdvanced Options

Go to the following screen and selectTroubleshooting, and then tapAdvanced Options, click in Advanced OptionsStartup Settings, then click Restart, and after starting it again, select Enter Safe Mode, select hereEnable Safe Mode, which is the fourth option, and then enterSafe mode

Click the shortcut【win+r】, click OK, if the problem is caused by a computer system update, click [View installed updates], you will see the recently installed system update, find the recently installed update, right-click and selectUninstallCan.

If the fault cannot be eliminated, the only thing left is to reinstall the operating system.

If your computer keeps spinning in circles, the system may be stuck or there is a problem, and here are a few possible ways to fix it:

Restart your computer: You can try restarting your computer to see if that fixes the issue. If it's just a temporary system crash or other minor issues, restarting your computer may be able to fix it.

Enter safe mode: If your computer still gets stuck after restarting, you can try entering safe mode. In safe mode, the system runs only the most basic programs and drivers, which can exclude the influence of some non-essential programs.

The method of entering safe mode varies depending on the operating system, you can press the F8 key while rebooting and then select Safe Mode to boot.

Check for hardware failures: If your computer keeps spinning in circles, it may be caused by a hardware failure. You can check the hardware equipment of the computer (such as memory, hard disk, graphics card, etc.) to see if it is faulty or damaged.

You can turn on the computer to check whether the internal device is normal, or use the hardware detection software to check it.

Perform a system repair or reinstallation: If none of the above methods work, you can try to repair or reinstall the system. You can start your computer using a disc or USB flash drive and select "Repair" or "Reinstall" the operating system.

This will erase all data from your computer, so you need to back up important data in advance.

Seek professional help: If none of the above methods solve the problem, you can seek professional help. You can contact the computer manufacturer or find a professional computer repair technician for repair.

The problem that the computer keeps spinning in circles may be caused by the following reasons:

1.Hardware issues: There may be hardware issues such as hard drives, memory, and processors. You can try reinstalling the hardware or replacing it.

2.System Problems: Trapped keys may be caused by loss or corruption of system files, or system problems caused by virus attacks. You can try using a system recovery or reinstalling your system.

3.Software conflicts: It is possible that some software is incompatible or that software conflicts are causing the problem.

You can try removing or updating the software.

To solve this problem, you can try the following methods:

1.Restart your computer: Just shut down your computer, then restart it and see if that fixes the issue.

2.Enter the safe mode: When you start the computer, press the F8 key to enter the safe mode and see if it solves the problem.

3.Check the hardware: Check whether the hard disk, memory, processor and other hardware are normal, and if there is a problem, you can replace or reinstall the hardware.

4.Check for viruses: Use anti-virus software to check if your computer is infected with viruses and remove them if they are present.

5.Restore your system: Using a system recovery or reinstalling your system, restoring your computer to a previous point in time, or reinstalling your system, can resolve some system issues.

If none of the above methods can solve the problem, it is recommended to contact a professional computer repairer for inspection and repair.

The computer has been turning in circles, on behalf of the loading of the computer There is a problem, first of all, check whether the computer's network is unblocked, if the network is fine, it means that the hardware of the computer, can not be loaded, at this time, you can try to re-know the socks to start the computer, to see if you can solve the problem, if not, it is recommended to upgrade the hardware of the computer.

Restart the computer: Sometimes the computer is spinning in circles because the system is stuck and there is a problem, and restarting the computer can solve the problem.

Check the hardware: The computer may also be due to hardware failure, you can check whether the hardware such as hard disk, memory, and graphics card is normal.

Clean up junk files: The accumulation of junk files in your computer can also cause your computer to spin in circles, and you can use cleaning software to clean it up.

Update the system: Sometimes the computer may be turning in circles because the system version is too old, you can try to update the system next to the jujube ruler.

Scan for viruses: The presence of viruses in your computer can also cause your computer to spin in circles, so you can use anti-virus software to scan it.

Reinstall the system: If none of the above methods can solve the problem, you can consider reinstalling the system.

2.Check your computer for excessive junk files: You can use the system's built-in cleaning tool or use third-party cleaning software to clean up junk files.

3.Check if your computer has too many background processes: You can use the task manager to stare at the skin machine, and if you find unnecessary background processes, you can end the process.

4.Check if there are too many startup items on the computer: You can use the system's built-in service manager to view the startup items, and if you find unnecessary startup items, you can disable them.

5.Check if your computer is running out of memory: You can use the built-in Task Manager to check it, and if you find that you are running low on memory, you can consider upgrading the memory.