The cashmere coat is thin, and the buttons are moved, so what to do with the buttonholes?

If you are thin, it is natural to move the button outward, which is equivalent to increasing the bust and waist circumference.

With the progress of the times, the design and material of the buttons on the clothes have become more colorful. However, sometimes buttons are more than just buttons, and the use of buttons has become an art. The use of buttons on ready-to-wear clothing plays a strong decorative role.

And in terms of the success or failure of clothing design, buttons also account for a large proportion. 1. Types of buttonsIn ancient Greek times, the form of clothing was to wrap the body with cloth, and the items that played a fixed role after winding were the earliest buttons. These buttons are made from animal bones and horns.

In modern times, these materials are still used as buttons. In addition to these, materials such as glass, synthetic resins, metals, etc. Once you are familiar with the material of various buttons, it is no longer difficult to decide on the size of the buttonhole.

The types of buttons are divided into stone buckles, cloth buckles, glass buckles, grass buckles, wooden buckles, bamboo buckles, metal buckles, shellfish buckles, bone buckles, walnut buckles, etc. According to the shape, it is divided into round buckles, square buckles, oval buckles, special-shaped buckles, etc. According to the number and form of holes, it is divided into two-hole buckles, four-hole buckles, open hole buckles, dark hole buckles, etc.

2. The method of choosing buttons: the buttons on plain clothing without patterns. Fabrics without patterns, and the buttons of the clothes made of them are generally of the same color as the fabric. When the color of the fabric is lighter, there are two ways to choose the right buttons.

First thread the thread into the needle hole, wear it alone, and then drag the crossed end down to make it into a double, so that the nail button is stronger, and then tie a knot at the end to play a fixed role, first thread the needle from the reverse side, leave the knotted end on the reverse side, so that the thread is fixed, and then thread the needle into the buttonhole, sew it up and down, and finally leave a length of two or three centimeters, wrap the needle around the thread, tie a knot, close the end, and finally cut off the excess part and it's OK.

Four eyes are very common, and six eyes have not yet been seen.

Absolutely, as long as there is a need. How much do you want?

Prepare materials: scissors, needles, thread.

1. Cut the button holes of the clothes with scissors.

2. From the reverse side of the buttonhole.

Down the needle. 3. Start sewing a circle around the buckle eye as the base of the lock buttonhole.

4. The needle passes under the buttonhole and over the bottom edge.

5. Wrap the thread around it and pull out the needle, and sew a circle around the buttonhole according to this method.

6. Finally, fix it on the back of the clothes.

This, a simple garment button hole is sewn to complete.

Some of the buttonholes of the newly bought pants are sewn with thread, so buyers need to use scissors to cut the buttonholes before they can wear the jeans.

First of all, fold the sewn buttonhole in half according to the middle, and then cut it with scissors, pay attention not to exceed the boundary of the buttonhole when cutting, so that the buttonhole is too big to buckle the button.

If it is the button hole of the finished clothes bought: then generally use scissors, first cut a small hole in the middle of the buttonhole, and then cut the scissors from the small hole to the two ends of the buttonhole, and you must be careful not to cut the end of the scissors.

If it's a round-toed buttonhole, you can start with the round-toe position and cut it all the way to the end of the buttonhole!

If you want to lock a buttonhole by yourself, generally use a hand needle to twist the four strands, iron the thread, the keyhole line is not easy to pimple, and then fold the fabric button hole to cut a small opening, and then hand scissors to cut out the buttonhole at both ends, continue to use a single thread along the buttonhole position to coarsely a circle, and then use a circle around the next stitch to lock the buttonhole.

It's best to fold it in half and then cut it, so that.

Attack to avoid the thread being pulled.

If you poke it directly with scissors, it is easy to tear the wire.

If you want to lock the seams, you can do it yourself. It is to fix it yourself with a needle and thread around the circle you cut.

If you don't lock it well, you're afraid that the thread will come out, light a candle, make a patch to heat it up, and then use the patch to get the edges. But that won't look too good.

Either you're better off going to a machine in the store that has a special lock hole to lock first and then cut.

Fold it in half and cut it in the middle of the hole with scissors, and then cut it along the edge of the hole, and the knitwear can't be locked, and the hole is cut smaller, just right, it will get bigger and bigger, and it's best to determine the range of the hole before using faster scissors.

The button holes in the waist of the trousers should be cut horizontally, and the placket buttons should be cut vertically.

It is okay to use scissors to twist a small hole directly.

Use the razor blade "Preferably new" to gently scratch slowly from one end.

It's easy to cut. After folding it in half, it is good to cut a knife of one centimeter, it is a straight line.

Fold it, fold it in half, and cut it. Cut it a little less first. Cut it big and it's over!

Fold it, fold it in half, and cut it. Cut it a little less first.

This buttonhole is useful, the matching button is on the reverse side of the collar on the other side, and is used to secure the collar when the collar is reversed. This was the earliest form of the suit, but with the change of time, the suit also changed, leaving only the buttonhole and the other button omitted. Buttons that include cuffs are also useful, and now they are also decorative buttons.

It may be that he did it wrong when he did it, and he made an extra buttonhole that could be returned.

This can be cut with scissors, and do not exceed the boundary of the buttonhole when cutting, otherwise the buttonhole is too big to buckle.

1. Prepare a pair of scissors first.

2. Fold the buttonholes of the jeans in half.

3. Start cutting with scissors.

4. Trim the size of the grommets with scissors.

After cutting, it is good to see if it fits.

First fold the sewn buttonhole in half in the middle, and then cut it with scissors, taking care not to exceed the boundary of the buttonhole when cutting, so that the buttonhole is too large to buckle the button.

Many of the buttonholes of newly bought jeans are sewn with threads, so many buyers need to cut the buttonholes with scissors before they can wear jeans.

Jeans are also known as "sturdy tweed pants". A type of tight-fitting pants worn by both men and women. The front pants are unpleated, the back pants are not provincial, the door is zipped, the front trousers are equipped with a diagonal pocket on the left and right, the back is equipped with two patch pockets with pointed waists, and the seams of the pockets are nailed with metal rivets and pressed with topstitching.

It has the characteristics of wear-resistant, dirt-resistant, close-fitting and comfortable to wear. Generally, indigo abrasive fabrics such as labor cloth and beef tendon labor cloth are used, and other fabrics such as imitation suede, corduroy, and velveteen are also used, collectively known as "jeans".

If you want to open it better, first fold the buckle hole in half evenly, and then use scissors to cut it from the middle, so that you will not cut it wrong. ~

Fold the button in half and cut it with the tip of the scissors, but be careful!

Use scissors to prick the hole, and then cut it down!!