What does water soil recharge do, and what is the difference between water soil recharge and soil re

In fact, water repair can not be used, the main role of water repair is to make some relatively large flaws easier to see and use this for further polishing, of course, it can also be used for water repair The main role is to fill in some small flaws that are difficult to detect with the naked eye when polishing (but I have encountered this situation less, and it seems that it is easier to spray water to cover the defects, so I have always sprayed only a thinner layer). At the same time, the water supplement can also enhance the adhesion of the paint surface, which can be directly used as a primer, because the general color of the water supplement is gray, the tone is darker, and some bright colors are directly sprayed on the water patch, and the effect is not very good, so it can also be sprayed on the water patch as needed. If necessary, of course, the first sign is to recommend the county's Wada Palace.

If you want to spray a large range, you can use a spray can, but the cost of a one-time investment is slightly larger. Small ranges can be bottled, and the price is relatively cheap.

Water soil filling is a way to fill the soil, which is an operation that needs to be carried out in order to eliminate the cracks, gaps and other defects on the surface of the model or to show a certain effect in the process of model making and processing.

Water recharge method:

In the model processing design, you can choose to spray cans or glass cans, glass cans are cheaper, but you need to have airbrushes or other professional tools. Compared with glass filling, sprinkler filling is more convenient to use, without the help of any tools, and the specifications are different, you have to choose according to the specific situation of the model, although it is convenient, but the effect is difficult to guarantee.

Water soil replenishment and soil replenishment are two different ways that are common in construction.

Water recharge soil is the foundation or surface of the original Meng family, using cement, mortar and other materials mixed with water, painted or sprayed on the area that needs to be repaired. The use of water as an additive can improve the flow and adhesion of the mixed material, making construction more convenient. Water recharge is mainly used to level or repair uneven surfaces, cracks or other damage of surfaces or specific component branches, and to increase the hardness and durability of the surface.

Soil filling is when soil or other filler is added to the area to be filled in order to add height or fill it up. Soil filling is usually used to fill potholes, subsidence or uneven areas in the soil ear grading or construction works to ensure the stability of the foundation and the stability of the building.

It should be noted that soil refilling should be done with soil or left in situ materials, while water recharging should be made with mixed materials, usually involving cement, mortar, etc. The choice of the method used is based on the needs of the construction situation.

1. First, the parts are sanded with sandpaper to remove the smooth surface of the parts to facilitate the adhesion of water and soil.

2. Then dilute the water recharge soil, and the dilution ratio of the water recharge soil is also very important, if it is too thick, it will also lead to the appearance of particle condition. Therefore, when diluting water supplementation, we should also pay attention to water replenishment soil and diluent.

blending concentration.

3. After dilution, it is poured into the airbrush, and the top cover of each airbrush has a ventilation port, which is used to make the paint in the airbrush flow and make the paint atomized normally. The vent should be kept unblocked at all times.

4. After the ventilation port of the top cover of the airbrush is dredged, you can spray directly on the object, the spraying is very uniform, and the surface of the object is very smooth and flat.

This brother said ......Water soil recharge is to have some small gaps and potholes that can be filled, and increase the adhesion of the model paint. Shake well before use, then add water to dilute in the ratio of 1:3 1:4, and apply the same layer as a pen.

This... It's not Tukeshui.

Soil filling is an operation that needs to be carried out in order to eliminate cracks, gaps and other defects on the surface of the model or to show a certain effect in the process of model making and processing. Generally speaking, there are three types of soil supplementation commonly used in the process of modeling, namely ordinary soil supplementation, plastic soil supplementation, and water soil supplementation. <

Soil filling is an operation that needs to be carried out in order to eliminate cracks, gaps and other defects on the surface of the model or to show a certain effect in the process of model making and processing. Generally speaking, there are three ways to fill the soil in the Changyin calendar in the process of making a model, namely ordinary soil filling, plastic soil filling, and water soil filling.

Water soil recharge refers to an operation that needs to be carried out in order to eliminate cracks, gaps and other defects on the surface of the model or to show a certain effect in the process of model making and processing. Soil filling is used to fill the gap between the parts of the model, and can also be replaced by 502, but it should be noted that if there is a crack or gap between the important load-bearing virtual parts in the model and the main body, only 502 can be used to fill the soil. <

Water soil refill refers to an operation that needs to be carried out in order to eliminate defects such as cracks and gaps on the surface of the model or to show a certain effect in the process of model making and processing. Soil filling is used to fill the gap between the model parts, and 502 can also be used instead, but it should be noted that if there are cracks or gaps between the important load-bearing parts in the model and the main body, only 502 can be used to fill the soil.