I bought a hanger to dry the quilt, but I can t take it off, what should I do? 100

Method 1: First, we hold both sides of a hanger and press it inwards to bend.

Then we tidy up the other hangers and hang them upside down in the curved hangers.

In this way, the storage hanger is neat and does not take up space, and it is also very convenient to take the time of the hanger.

Method 2: Let's take a large hanger.

Thread the large hanger through the inside of the other hangers, and the large hanger has a longer side than the small hanger, so that the hanger is not easy to fall.

It is also a very practical way to store hangers in this way.

Two small ways to store hangers, I hope it can help everyone, this is the end of this episode, if you have any better methods and suggestions.

It's like taking a stick into the door, and you can't get in with the stick sideways.

So, swing the hanger at an angle and it's easy to remove!

Are you talking about the kind of drying rack that automatically lifts?

Is it because the operation method has not been mastered clearly? If there is a malfunction, you can only find a stool or a ladder to climb the ditch and take the quilt off.

I bought a hanger to dry the quilt, but I couldn't take it off when I got it, so I had to use a stool to catch the stairs, and I could take it off.

Quite simply, if you feel like you can't take it off, you can take a stool and step on it, and then shorten the drying rack so that you can do it.

Move the hook directly above, bend the hook harder, and you can take it off. The hook can be twisted back again, and the plastic materials are like this, and the one inside seems to be a wire or something. I've tried it many times anyway.

In this case, you can step on a ladder to remove it, and be careful to avoid falling down.

How to hang it up can be taken off, move to the end of the position, can't move, make the curvature of the hanger a little smaller, take it down and then go back, it still doesn't work, just bend the middle a little bit, take it out and restore it.

Half of the shelves for drying quilts extend out of the window, and you can take them back and take them again! Hope!

I bought a hanger to dry the quilt, but I couldn't take it off. This is caused by your improper operation, you can find a ladder to go up and take it down.

It should be said that this kind of hanger can definitely be taken off, and it can be hung up but not taken off.

It can be taken down using a hanger rod, or if not, it can be taken down using a stool to climb up.

I bought a hanger to dry the quilt, but I got it up and took it up, but I couldn't get it down, so I found a stool to step on it, and then took it down.

The hanger you bought to dry the quilt turned out to be unavailable, and you couldn't take it off. You can solve this situation with the merchant, and if you want to solve it yourself, then you must study it carefully.

What should I do if I buy a hanger to dry the quilt but can't take it off? I don't think it's a big deal to see your drying rack, it's too valuable, then you don't want it, or you can go to the labor company and find a professional to help you take it down.

I bought a hanger to dry the quilt, but I can't take it off, what should I do? I think you can find a bench to stand on and then you can take the quilt off.

What if I bought the hanger for drying the quilt and can't get up when I get it? I think that in this case, I may have to take off the stool to cushion my feet.

I bought a hanger to dry the quilt, but I couldn't kick it down. Then the best thing to do is to get someone to help. Just get the hanger ready.

I bought a hanger to dry the quilt, but I couldn't take it off, and I needed to open her hanger before I could take it off.

I bought a hanger to dry the quilt, what if I can't get it up and can't get up? I think it's dangerous to be like this. It's best not to use it.

Then buy a ladder to get it down.

It's too heavy, so it's recommended to take it off manually, don't force it down, and ensure safety.

There is no hanger that cannot be removed, and it is not an anti-theft screw.

Summary. The drying rack can't be put back Method: 1. First of all, you need to check whether the battery of the remote control is still charged, whether the power is sufficient, if the battery can't rise because the battery is out of power, you can replace the battery.

2. You can also check whether the micro-moving switch has failed. 3. You can also check whether the circuit fuse of the motor and the whole machine is loose or burned. 4. It is also possible that there is a problem with the upper and lower ends of the drying rack telescopic rack, and you can check whether it can be retracted freely.

The drying rack can't be put back Method: 1. First of all, you need to check whether the battery of the remote control is still charged, whether the power is sufficient, if the battery can't rise because the battery is out of power, you can replace the battery. 2. You can also check whether the micro-moving switch has failed.

3. You can also check whether the circuit fuse of the motor and the whole machine is loose or burned. 4. It is also possible that there is a problem with the upper and lower ends of the drying rack telescopic rack, and you can check whether it is poor filial piety that can be retracted freely.

Can you add, I don't quite understand it.

The drying rack can't be put back Method: 1. First of all, you need to check whether the battery of the remote control is still charged, whether the power is sufficient, if the battery can't rise because the battery is out of power, you can replace the battery. 2. You can also check whether the micro-moving switch has failed.

3. You can also check whether the circuit fuse of the motor and the whole machine is loose or burned. 4. It is also possible that there is a problem with the upper and lower ends of the drying rack telescopic rack, and you can check whether it is poor filial piety that can be retracted freely.

Summary. 1.Pull the wire rope on both sides with your hands, then use a little force downward, and then press the remote control again to solve this problem.

Everyone should also maintain the electric drying rack frequently in daily life. 2.It may be because the internal steel wire is stuck, if there is a stuck phenomenon in the process of use, it cannot be forcibly driven, which will lead to damage to the internal parts when ,.. use

3.You can smear a little lubricating oil on the pulley of the electric drying rack, and after having lubricating oil, the pulley of the electric drying rack can be used normally, and the electric drying rack can be raised.

Can you add, I don't quite understand it.

1.Pull the wire rope on both sides with your hands, then use a little force downward, and then press the remote control again to solve this problem. Everyone should also maintain the electric drying rack frequently in daily life.

2.It may be because the internal steel wire is stuck, if there is a stuck phenomenon in the process of use, you can't forcibly drive the brigade to dismantle, which will lead to damage to the internal parts when ,.. use3.

You can smear a little lubricating oil on the pulley of the electric drying rack, and after having lubricating oil, the pulley of the electric drying rack wheel can be used normally, and the electric drying rack can be raised.

Summary. What's going on with the drying rack not being put away.

You've done a great job! Can you elaborate on that?

2. It may be because the internal steel wire is stuck, if there is a stuck phenomenon in the process of use, it can not be forcibly driven, which will lead to damage to the internal parts when used, and you can find professional personnel for maintenance in time, and the internal steel wire can be dredged, and the internal steel wire can be used normally3.Check whether the micro-moving switch is sensitive.

4.Check the circuit fuse of the motor and the whole machine to prevent it from being burned. 5.

It is also possible that there is a problem with the upper and lower ends of the drying rack telescopic rack, and you can check whether it can be retracted freely. If you still can't get up after trying all the above steps, you need to contact a professional. The pulley of the electric laundry attack is broken, it will cause this phenomenon that can only fall and can not rise and clear, and it is good to disassemble and replace a valve pulley, if you can't do it, you can find the manufacturer to let him provide you with technical support.

What should I do if the moving drying rack can't go up1Determine whether the kernel is broken The kernel controller used by electric drying rack manufacturers is much the same, and there is not much difference. The most common electric drying rack, if it is in normal operation, is three ticking sounds when it is just powered on.

2.Judge whether the remote control is broken or out of power When the controller and the remote control are normal, when operating the remote control, they will hear a beeping sound, press Chunhe once to stop the ring, if you can't hear the sound, then it depends on whether the remote control is damaged. 3.

The upper travel switch is broken or does not rise to the top and causes air drying.

1. The drying rack is damaged, you need to see where it is broken, and there may be a problem that the wire cannot be locked, mainly because it is affected by its own weight, and the gear will fall directly, resulting in the steel mesh detached. The maintenance is also relatively simple, directly open the cavity, hook the end of the spring to the protruding tongue inside, and then re-wrap the neck, be sure to wind it firmly. Then it is loaded into the steel pipe, and the spring at the other end should be hooked to the column, and it should also be inserted into the buckle to compress, wound and loaded, and finally the bottom plate can be installed.

2. There may also be the problem of shaking, mainly because the steel wire is rotten, which will cause the local steel wire to bulge, and resistance will occur when it is shaken naturally. After opening the cavity, we can slowly reverse the wire, and when it reverses, the other hand should pull the wire rope outward. Then straighten out the wire again, and just put it on as it is.