How to clean the juicer if it is moldy Introduction to cleaning and maintenance methods

Juicer cleaning and maintenance tips:

1. Dish soap.

Add 1 3 warm water and dish soap to a stirring container, plug in the power and stir for 1 minute, then rinse with clean water.

2. Egg shells.

Break the egg shell (preferably a hard-boiled egg, clean and hygienic) into small pieces and put it in the juicer, not too broken and not too big. Pour an appropriate amount of water into the juicer with the eggshells, not too much, as long as it is not over the eggshells. Cover with a lid, stir for 30 seconds, pour out the beaten mixture, add some water and shake it to rinse again.

3. Wash the minced meat.

If you use a multi-functional juicer, it will definitely have the function of grinding meat, which is more difficult to clean after grinding. To clean such a juicer, you should put more oil, which will reduce its viscosity, and after stirring, use the remaining dry steamed bread residue to stir, and you can clean it.

4. Clean the pepper material.

It will be difficult to clean in this way, at this time, it is necessary to clean with detergent, then wipe with a dry cloth, and finally use boiling water for scalding, so that the fine powder in the gap of the cutter head can be fully dissolved, and the cleaning will be relatively clean.

5. Clean the fruit fiber.

Fruits contain a lot of fiber, especially mangoes and tomatoes and other fruits, people who often squeeze fresh juice may notice that the cutter head will be difficult to clean, because there is a lot of pulp blocked at the cutter head, this cleaning should be careful, the fiber strip blocked at the cleaning cutter head can be slowly pulled out according to the direction it is wound, do not use too much force, and the other can be brushed with steel wool balls, but not too hard, so as not to damage the cutter head.

Juicer maintenance of those things.

First of all, after the juicer finishes squeezing the juice, you must first cut off the power supply, separate the cup and barrel and the main engine, and clean the machine simply, don't wait until the pomace and debris in the juicer have condensed before cleaning, which will be very troublesome. We must dispose of these pomace and debris in time, so that it is also good for the juicer. If possible, the cutter head can be removed, because it is easy to entangle fruit fibers and residues here, and these residues should be slowly pulled out along the direction of winding, and then the cutter head should be cleaned.

However, I do not recommend removing the cutter head for cleaning every time, because this is not good, and it is not advisable to disassemble the cutter head frequently. We just need to clean it regularly according to the actual situation.

Another tip to tell you that everyone must have those discarded small brushes or toothbrushes at home, don't throw them away after use, because these things will be especially useful when cleaning the small area of the juicer, and they will be very clean.

1. After squeezing the juice, disconnect the juicer from the power supply and separate the cup and bucket from the main engine. Clean the machine briefly first, and don't let the pomace and other debris in the machine condense, which will bring some trouble to the subsequent cleaning. If possible, the cutter head can be disassembled, but the number should not be too frequent, the cutter head is easy to entangle the fiber or residue of fruits and other foods, and the residue should be pulled out along the winding direction, and then rinsed with water.

2. Don't throw away the old small brushes or toothbrushes at home, they have a special effect when cleaning small places, so the cleaning effect is better. If the knife head is used to grind meat, break the remaining steamed bread into steamed bread residue and put it in a blender to stir, which can effectively absorb minced meat, etc., and clean it is relatively clean. The cleaning of the appearance is relatively simple, wipe it with a rag, remember not to rinse with water, or scrape with a hard object, so as not to cause surface damage, and the base can not be immersed in water, so as not to destroy the insulation part of the motor.

1.After squeezing the juice, the machine is cleaned briefly.

2.If possible, the cutter head can be disassembled, and the cutter head is easy to entangle the fibers or residues of fruits and other foods, and the residues can be pulled out along the winding direction first, and then rinsed with water.

3.Don't throw away a small brush or toothbrush that you have at home, you can use a small brush to brush it, so that the cleaning effect is better.

4.If the knife head is used to grind meat, break the remaining steamed bread into steamed bread residue, and then put it in a blender and stir, which can effectively absorb minced meat, etc., and it is relatively clean.

5.The cleaning of the appearance is relatively simple, wipe it with a rag, it can not be washed with water, or scraped with a hard object, and the base can not be immersed in water, so as not to destroy the insulation part of the motor.

Here's how:

Squeezing delicious juice at home is cheap and hygienic, but you often have to worry about cleaning the juicer.

Here's an easy way to clean the blender without having to take it apart.

Add 1 3 warm water and dish soap to the mixing container, plug in the power and stir for 30 seconds, then rinse with clean water.

Of course, this method can also be applied to all kinds of mixers.

Remove the larger pomace by hand, rinse with water, and finally use a brush to clean the pomace in the crevices such as the strainer.

Joyoung juicer JYZ-B521 can not only squeeze juice, vegetable juice, but also soybean milk, but it is raw, it needs to be heated, and it can also grind meat, which is enough for you, and it is also very convenient to clean.

If the juicer is used for a long time, there will be a peculiar smell, probably because you don't brush it properly every time, and there is a residue left on the leather pad under the knife head, which deteriorates after fermentation, which is what we often call mold. If you hit fruit and meat stuffing and the like, and you don't brush it properly, just just rinse it casually every time, then after a long time, the food smells of each other, then it is the smell of the stinky smell you are talking about.

Clearing:1Please find a small brush (medium hardness), it is recommended that you dip some water in expired alkaline noodles and use a small brush to carefully brush the corners that you usually ignore. After brushing, rinse with water. This method will not cause pollution, so you can prepare for the next use.

2.Of course, you can also use the wash to clean, the disadvantage: there will be residue. Some also have a flavor flavor.

Spending a few days in the sun is definitely fine.

1. Egg shell: With egg shell, you can clean the dirt inside the juicer, the specific operation method is to prepare two egg shells first, break them with a hard object, and then pour them into the juicer with water, and then start the juicer, let it stir fully, and the dirt will be removed. It is important to note that the eggshell fragments should not be too large.

2. Dish soap: After using the juicer every time, add warm water and dish soap, plug in the power and stir for 30 seconds, and then pour out the water, which is also a good way to clean the juicer.

3. Steel wool ball: The fruit contains a lot of fiber, such as the fruit residue remains on the blade, which is difficult to clean, you can slowly pull out the fruit fiber strip on the blade, or you can also use a steel wool ball brush to remove all the fruit fiber strips faster.

4. Oil: To clean the minced meat, you can put more oil when stirring the meat to reduce the stickiness of the minced meat, and then use a juicer to stir the steamed bread, so that the minced meat will stick to the steamed bread and be removed when cleaning.

Add 1 3 warm water and dish soap to the mixing container of the juicer, plug in the power and stir for 30 seconds, then rinse with clean water.

Wash the back of the filter with gauze while flushing with the faucet, so it is easy to wash.

The clogged fiber strip at the cutter head can be slowly pulled out according to the direction it is around, do not use too much force, and the other can be brushed with steel wool balls, but do not use too much force to avoid damaging the cutter head.

Cover the 3 4 of the faucet with the index finger of one hand to form a "water pressure gun" to flush away most of the pulp residue, and then brush the edge with a toothbrush a few times.

When cleaning the juicer, add a small half cup of water and add some broken eggshells, stir for two minutes, and you will find that the juicer is as bright as new, and it works better with vinegar and eggshells.