What should I do if there are scratches on the solid wood door cover, and how to fix the scratches o

Do not hang heavy objects on the door leaf or avoid sharp objects bumping or scratching when opening or closing the door, do not use too much force, and do not hit the wooden door.

Do not open the door lock with wet hands or splash corrosive solvents on solid wood composite doors and door locks. When opening the lock or turning the door lock handle, do not use too much force. Hinges, door locks and other frequently movable hardware accessories should be tightened immediately when they are loose.

When the door lock does not open, you can add an appropriate amount of lubricating materials such as pencil lead foam to the keyhole for lubrication.

When wiping the glass, do not allow the cleaning agent or water to penetrate into the gap of the glass bead to avoid the deformation of the bead. Do not use too much force when wiping the glass to avoid damage to the glass and personal injury. If there is a big bump after the glass is broken, be sure to ask a professional to repair it.

When removing stains on the surface of the solid wood composite door (such as handprints), you can use Ha gas to wet it and wipe it with a soft cloth. Rigid cloth can easily scratch the surface, and when the stain is too heavy, you can use a neutral detergent, toothpaste, or furniture cleaning agent, and wipe it clean immediately after removing the stain. Do not rub the edges and corners of the solid wood composite door often, so as not to cause the edges and corners of the finishing material to fade and break.

When removing dust from wooden doors, you can use a vacuum cleaner to remove it without using a soft cotton cloth. In order to maintain the gloss and service life of the wooden door, it should be cleaned and dusted regularly, and the surface of the wooden decoration products can be maintained with a special curing liquid.

In spring and winter, the indoor ventilation should be kept good, so that the solid wood composite door is in a normal temperature and humidity environment, to prevent the solid wood composite door from being deformed due to humidity and temperature difference, and the metal fittings should be etched, edge-banded, and the finishing material should fall off. When using electric heaters or other heating equipment in winter, keep them away from solid wood composite doors to avoid deformation by heating.

When painting the wall, the solid wood composite door should be covered to avoid peeling and fading the veneer material of the wooden door by painting the paint, which will affect the overall appearance.

Of course, the best way is to find a beautician for furniture wooden doors, although the fee is a little more, but the repair effect is the best, if you do it yourself, you can let the store that buys the door to adjust the color lightly, and so on after the dry, take the supermarket furniture with Gris to wipe it, it's OK, no color essence to find them to ask for color wax.

If the scratches are relatively shallow, you can apply the special maintenance essential oil for the wooden door, which can effectively repair the scratches and play a protective role.

If the scratch is deep but does not break the paint film, it can be polished with polishing wax. Generally, polishing wax is used to protect the luster of wooden doors, floors, etc., which can not only make the surface of wooden doors smoother, but also will not make the scratches deeper.

If the scratch is very serious, it should be treated with No. 400 water sandpaper dipped in soapy water, wiped clean and dried, and then partially recolored, you can apply a layer of paint on the surface, wait for 24 hours, and then polish it with No. 400 water sandpaper and apply wooden door wax for polishing.

If there are scratches on the wooden door, if the scratches are shallow, you can use the special maintenance essential oil for the wooden door to apply; If the scratch is deep, you can use polishing wax to polish it; If the scratch is very serious, it should be treated with 400 water sandpaper dipped in soapy water; If it is a large area of scratches or cracks, contact a professional to deal with it. Here's how:

1. If the scratches are relatively shallow, you can use the special maintenance essential oil for the wooden door to apply it, which can effectively repair the scratches and play a protective role.

2. If the scratch is deep, but the paint film is not damaged, it can be polished with polishing wax. Generally, polishing wax is used to protect the luster of wooden doors and floors, which can not only make the surface of wooden doors smoother, but also will not make the scratches deeper.

3. If the scratch is very serious, it should be treated with 400 water sandpaper dipped in soapy water, then wiped clean and dried, and then local color supplement, a layer of paint can be applied to the surface, wait for 24 hours, and then polish with 400 water sandpaper, and apply wooden door wax for polishing.

4. If there are large scratches or cracks on the surface of the wooden door, do not deal with it yourself, it is best to contact the merchant or ask a professional to renovate it.

Security door scratch repair can be divided into two situations:

1.Shallow scratches: If the scratches are not deep, you can use a repair paint similar to the color of the security door, polish the scratches to the cover mark, and then spray an appropriate amount of repair paint.

If there is wax on the surface of the security door, you can use sandpaper to smooth the surface first so that the scratches can be better repaired.

2.Deep scratches: If the scratches are deeper, a more professional approach is needed to repair them.

You can first use a blade to scrape off the paint around the scratches, then use plastic spike powder to add Tianna water to make a paste, scrape the scratches with the blade, and then bake them at close range. Finally, take the plastic powder of the Shisen tribe and add Tianna water to make a paste, scrape the scar with a blade, and then bake it at close range to make the scar consistent with the surrounding color.

It should be noted that repairing the scratches on the security door requires professional operation, and if you are not sure how to repair it, it is recommended to ask a professional for consultation or repair. At the same time, it is also necessary to pay attention to the protection of the security door in daily life to avoid serious impact or scratches to reduce the appearance of scratches.

Hello dear<>

1. What are the tips for repairing scratches on the anti-theft door 1. Wipe the scratches back and forth with sandpaper until the scratches on Anfan and the whole door are smooth. 2. Use a hair dryer to melt the repair crayon and apply it to the scratched area of the security door. 3. Wait for the solution to cool and smooth the scratches with your hands.

4. Use a rag to remove the traces of crayons, and then use a marker of the same color to repair the sedan chair. 5. It can be repaired by spraying PVC transparent primer. 2. How to maintain the anti-theft door 1. Push and pull gently Although the tamper-proof door is a steel door, and the strength of the stainless steel plate meets the national industry standard, it must be pushed and pulled as much as possible when opening the opening.

Long-term severe impact parts are easy to damage, thus shortening the life. 2. Door leaf maintenanceIn daily application, often use a dry thin cloth to scrub the anti-pry store surface to keep the warehouse clean, prevent corrosive chemical corrosion, and enhance the brilliance of the anti-pry door. It is recommended that all friends do not tear off the protective film on the door leaf before the end of the interior decoration, because it is very easy for metal special tools to cause scratches or unavoidable damage on the door leaf.

3. After a period of time after installation and use, the sound of metal friction is likely to be heard. This does not mean that the product is of poor quality, nor does it mean that there are damaged components, which may be caused by a lack of lubrication of the door hinges and bolts. Inject a small amount of grease on time in the rotating position of mechanical equipment (such as door hinges and deadbolts) to keep doors and hardware locks open and close flexibly and allow for long periods of time The above is my reply to you, if you think my reply is good, please move your fingers to give me a five-line thumbs up Oh <>

Repair method: Material preparation: hair dryer, repair crayons, brown marker, rag opening, frosted paper, PVC transparent primer.

Step 1: Use sandpaper to rub the scratches back and forth until the scratches on the security door are smoothed.

Step 2: Melt the tinkered crayons with a hair dryer and drip on the scratches on the security door.

Step 3: Wait until the repair crayon solution has cooled and smooth the scratches with your hands.

Step 4: Remove traces of the crayon with a rag and repair it with a brown marker.

Step 5: Use PVC clear primer to spray the repair location and wait until the scratches are cooled and the repair is complete.

Scratches on the security door need the following steps:

Wash the scratches: First, wash the scratches on the security door with soap or detergent and gently wipe them with a soft cloth.

Apply toothpaste: Apply toothpaste to the scratch area and gently wipe it with a soft cloth to remove the dirt and fingerprints on the scratched surface.

Apply paint: If the scratch is deep or the area is large, you can apply paint to the scratch and apply it evenly with a brush to allow the paint to penetrate into the scratch to cover the scratch.

Polishing: After the paint is dry, polish the surface of the security door with a polisher to make it look smoother and brighter.

It is important to note that cleaning agents containing alcohol, vinegar or other chemicals should be avoided as much as possible when repairing scratches, as these chemicals may damage the surface of the security door. At the same time, before repairing the scratches, you should first check whether the surface of the security door is damaged or corroded, and if there is a problem, you should deal with it first.

Anti-theft door scratches can be repaired with special repair agents for repairing furniture, and aluminum alloys can be applied with similar glass glue toning.

Scratches on the anti-theft bai door can be repaired with du paint pen: zhi paint pen comes in a variety of colors

The color is bright, and it can be colored on various materials such as wood, metal, glass back glass, porcelain, cloth and other materials.

The method of applying the paint brush is basically the same as that of a normal paintbrush, except that the tip of the pen is shaken and pressed before applying to allow the paint to flow to the nib. Don't squeeze too hard when you put down the pen so as not to leave a small dot where the stroke is. Painting with a paint pen can do a good job of shielding scratches on the security door.

If there is no iron leakage, you can use the scrub fluid used to repair the car, and if the iron leaks, you have to touch up the paint.

Buy a lacquer pen of the same color. Car scratches can be removed, not to mention the door, car supply stores have it.

The vast majority of paint-free doors on the market refer to PVC veneer doors. It is made of PVC veneer vacuum blister processing technology for the outermost part of the solid wood composite door or molded door. The same goes for door covers, which are treated with PVC veneer.

There is also a finished wooden door that has been painted in the factory, which is also called paint-free door.

Shallow scratches, not penetrating the primer, can be sanded with fine sandpaper, the scratches are worn off, and then painted for protection, to be on several times, each time to be a little larger than the previous application area, the last time just brush to the edge of the paint-free door.

For deep scratches, you can only gently polish the haired paint surface (keep the scratches) and apply it directly. Ibid.

The lacquer should be the same as the original paint-free door, and it is best to choose a single component, which does not need to be blended, can be used at any time, and can be stored for a long time. If you make it yourself, it is best to paint the water-based wooden door, which will not poison yourself.

The surface of the paint-free door is a layer of PVC film, which is basically impossible to repair. The veneer can be putty and painted. PVC is not good.

Each has its own merits, all of which are good and bad, but in the problem of discoloration, it is the best to paint the door, and it is not discolored. If the throttle is mixed, it is also a kind of solid wood composite door, and the surface is baked with white paint. The paint-free door process is also a composite structure