What should I do if the door doesn t close? What are the reasons why the wooden door won t close?

You can use something to clamp the door crack, or change it to a new door, or you can thicken the door frame, so that it is OK, if it is a lock problem, Jianye will find a professional to change a lock.

Lift the door panel when you close it.

Find a repairman to help you fix it, and if it doesn't work well, tear down the door and buy a new one later.

Change the doorknob, or you can simply change the door.

Or hold something against the door.

Change the door, or find a worker to repair it.

Change the door, or find someone to repair the door to help.

First carefully check that there is a problem, and then repair the problem.

Specific issues and specific amendments. The door won't close, probably because the door frame has been deformed, causing it to sag. In this case, the door frame can be removed first, and the sunken part can be broken with the planer used in the carpentry, and then the door frame can be reinstalled.

If the door does not close because the screws are loose, find the loose screws and retighten the screws. If there is a problem with the hinge and hinge, replace the hardware accessories with new ones, and then drip lubricating oil, and the switch will be free. Regarding the problem of door sinking, you can also use a wooden wedge, choose a small molded wooden block, and stuff it directly into the gap under the door, which can prevent the door leaf from continuing to sink.

In addition, adjust the hinge again, which can solve the problem of not being able to close the door.

If it is caused by sagging, you can first remove the door frame, use a wound to create the part that has sunken, and select a molded wooden block to plug it into the gap under the door. If the door cannot be closed due to loose screws, find the loose screws first, and then retighten the screws. If there is a problem with the hinge and hinge, replace the hardware accessories with new ones and then drip lubricating oil.

The villa master provides you with local building policies, building drawings, and villa design drawings;

Villa appearance renderings service, thousands of popular drawings for you to choose.

Villa Master.

The screw is loose to remove the hinge on the door and install it again, the main thing is that the hinge on it is best to replace, he may be pulled loose, you shake the door, is it loose pulled. If the lower part of the door is not stuck on the ground and will not get stuck, you can reinstall the side of the lock. Because the door can't be closed, the two parts of the lock can't be pulled together, so you remove the side of the buckle and align it with the other side before installing it.

The wooden door cannot be closed or closed tightly, first consider three reasons: door cover, hinge, and wooden door deformation. In all three cases, the underside of the door may be dragged to the ground, making it too difficult to close or not closing.

If you can close the door by gently lifting it, it must be because the screws on the hinge are loose, or the hinge is broken. Then we can solve the problem by tightening the screws or simply changing the hinge to a better one, and don't replace the entire door because of this small problem, which is a bit wasteful.

Wooden doors have the characteristics of thermal expansion and cold contraction, if the environment is more humid place, the wooden door is more likely to expand and deform, which can easily lead to the situation that the door can not be closed. This is not something that will be solved by replacing hinges and door covers. In this case, it is better to change to a door with better waterproof and moisture resistance.

What goods have a service life, after a certain period of time will appear all kinds of problems, especially the wooden door, after a long time the door will not be closed or closed tightly, the following will help you analyze several reasons why the wooden door can not be closed, the door can not be closed or closed tightly, most of the reasons are in the door sleeve and hinge. If it is a wooden door, there is also a possibility that the door is deformed. In all three cases, the underside of the door can be dragged to the ground, making it too resistant to closing or not closing.

If you can close the door with a gentle lift, it must be because the screws on the hinge are loose, or the hinge is broken. Then we can solve the problem by tightening the screws or simply changing the hinge to a better one, and don't replace the main door because of this small problem, which is a bit wasteful.

1. If the deadbolt is short, replace the tongue lock, reinstall the door lock and other components, remove the old one, and then install the new one in the original position.

2. If the door leaf is sinking, the hinge on the door leaf is deformed or loose, which will cause the door to be closed loosely, and the hinge only needs to be tightened to solve the problem of the door not being tightly closed.

3. If the door leaf or door sleeve is deformed, you can use tape or cloth to stick it in the gap, although it will affect the appearance, but it can effectively close the door.

4. If the lock of the door cannot be closed normally, you can also install a latch on the door frame, which can use the latch to close the door, and you can also stuff a wedge-shaped wooden block in the gap of the door, which can effectively deal with the problem of not closing tightly caused by sagging.

It may be that the hinges of the door are not good, or the problem of the door lock, it is recommended to find someone to check it, if the hinges of the door are not good, it may be because the installation is not adjusted well, or the hinges of the door themselves are not of good quality, this hinge is generally used on the wooden door. If it is a problem with the lock, it is recommended to change the lock to try, if it still doesn't work, then you can only change the door. If it is a problem with the wooden door, then you need to find the manufacturer of the wooden door to repair it, because this is the quality problem of the wooden door, so you need to find the manufacturer of the wooden door to solve the problem.

1. Deformation of wooden doors: In a humid environment, it is easy to deform, resulting in the door not being closed. 2. Hinge: not a wooden door, it may be that the hinge is loose, just tighten it, if it is broken, replace one; 3. Deformation of door sleeve:

This belongs to professional technology, contact the manufacturer to repair and deal with it.

How to maintain the wooden door:

1. When using the wooden door, the switch should be gentle, or it will cause damage to the wooden door, and when the wooden door is installed, it must be opened often for ventilation to ensure that there is a dry environment indoors.

2. Do not use wet hands to touch the handle on the door to prevent the handle from rusting and other conditions caused by the moisture above, and also do not use some corrosive or sharp things to contact the wooden door, or it will not scratch and corrode the wooden door.

3. Regularly wipe the surface of the wooden door, if it is touched by some stains, you can use a cloth dipped in detergent to deal with it. After cleaning, wipe with a dry cloth to prevent moisture from remaining on it, and the cloth must be soft, or it will scratch the surface of the wooden door, which will also affect the aesthetics. When it is rainy, you can turn on the dehumidifier to prevent the wooden door from absorbing water and causing deformation.

It is also important to wax it regularly to maintain its shine.

The door has been damp, and the weather has been relatively hot recently, which has caused the door to deform, and then there is a phenomenon of friction and collision with the door frame;

The door is crooked (or the hinge is loose), which causes the door leaf to sink, and the size of the gap between the top and bottom and the door sleeve is different, so the door leaf is easy to rub and collide with the door frame, and it will not be closed in serious cases.

How to fix it?

First of all, we need to do the work of measuring the size, measure the width of the upper middle and lower side of the door leaf installed in the door sleeve, and the width of the upper middle and lower door leaf, whether their upper middle and lower width is consistent, the general width of the door hole is more than 6-7mm is the most suitable, if it is less than 3-4mm, it means that the door is deformed, it is more difficult to install and close. But if the size is 6-7mm, then observe how big the hinge is when the door is closed, generally there is 3mm on the hinge side of the closed state, if it is much larger, it is a problem with the hinge.

If it is deformed due to heat expansion and cold contraction, the decoration master suggests that you can see if it is ** touching the door frame, and then remove the door leaf, scrape the door edge with a planer, and then find a professional painter to repair it.

But if there is a problem with the hinge, you can move the place. Loosen the hinge at the bottom of the wooden door connecting to the door sleeve, and then in the hinge groove of the door frame, use the planing blade to chisel the groove slightly deeper, the depth can be adjusted according to the needs of the door opening and closing, after debugging, it is best to remember to stuff some cardboard shells into the screw hole, and then tighten the hinge. The actual operation is not difficult, and there is no need to dismantle the door, which is more time-saving and labor-saving.

The door is not easy to close, you need to check whether there are screws loose in the hinge, if there is, it should be tightened. It is also necessary to check whether the wood on the edge of the door frame is deformed and deformed, resulting in an increase or decrease in the area of the door frame, which in turn shows that the door cannot be installed tightly.

It depends on what kind of door you are. If it's that kind of um, that is, the security door, do you see if it's stuck in something? Or maybe Nana went to the place.

If the door is not closed, it may be that the folding page of the door is not easy to use, and it will be good to change it to a new one.

The loose-leaf shaft of the door is not short of oil, and the shaft should be oiled.