Moving head light wiring method, moving head light debugging tutorial

Moving head light connection.

1. Introduce the external structure of the moving head lamp, the base of the lampshade shell, the signal cable and the power cord inlet and outlet. There are many classifications of moving head lights, there are 1200 watts, 550 watts, 230 watts, 200 watts, etc., in recent years, there have been low-power beam moving head lights, almost replacing the 1200 watt computer moving head lights that were previously applied, but their application principles are the same.

2. Connect the power supply of each computer moving head lamp to ensure that each moving head lamp is energized, and then connect it in turn according to the import and export of the signal line.

3. Use the signal cable to connect the moving head light to the console.

Find out the control line first, to cut off the fire and keep zero, the two control wires are actually one, connect the live wire to one of them, connect it to another interface of the bulb after the switch, and then return to the switch.

They all use two-center closed lines to make signal transmission lines, 2 positive, 3 negative, 1 ground.

Address code, it depends on how many channels your console has, if it is 8 channels, it is 1+8+8 and keeps adding, if it is 12 channels, it is 1+12 and adds it like this, understand? There is no fixed address code, it all changes with the number of channels in the console.

To add. For example, 8 channel consoles, the first is 1, the second is 1+8=9, the third is 1+8+8=17, and the fourth is . . . And so it is.

Dear, I have inquired about the specific operation for you, and the hard browsing Oh moving head light debugging tutorial generally includes the following steps:1Check whether the power supply of the moving head light is normal and make sure that the power cord is in good contact; 2.

Check whether the controller is normal, and make sure that the cables of the controller are in good contact; 3.Check whether the bulb of the moving head light is normal and make sure that the connecting wire of the bulb is in good contact; 4.Check whether the control program of the moving head lamp is normal, and ensure that the connecting wires of the control program are in good contact; 5.

Check whether the controller of the moving head light is set correctly and make sure that the controller is set correctly; 6.Check whether the control program of the moving head light is set correctly and make sure that the control program is set correctly; 7.Check whether the controller and control program of the moving head light are connected correctly, and make sure that the controller and control program are connected correctly; 8.

Check that the controller of the moving head light and the bulb are properly connected to ensure that the connection between the controller and the bulb is correct; 9.Check whether the control program of the moving head light and the bulb are connected correctly, and make sure that the control program and the bulb are connected correctly; 10.Finally, check that the controller, control program, and bulb of the moving head light are working properly to ensure that the moving head light is working properly.

Summary. Hello, moving head light is a kind of lighting equipment that is often used in performances or stage performances. They create special effects by controlling the rotation and movement of the light, such as quick transitions or flickering.

Moving head lights typically consist of a head, a stand, a control system, and a power supply, which can be controlled manually or automatically. They are an essential part of stage performances and are used to create shocking and fantastical effects for the audience.

Hello, moving head light is a kind of lighting equipment that is often used in performances or stage performances. They create special effects by controlling the rotation and movement of the light, such as quick transitions or flickering. Moving head lights typically consist of a head, a stand, a control system, and a power supply, which can be controlled manually or automatically.

It is an essential part of the stage performance, used to create a shocking and fantastical effect for the audience. Air.

Pro, moving head lamp is a modern high-tech prop, which is not only widely used in concerts, stage performances, weddings, speeches and other activities, but also widely used in film and television shooting, shooting and other fields. The moving head light is mainly composed of girder, lamp body, control system, power supply and bracket and other parts, different RGB CMY and other color LED lights are installed on the girder, through the control of the pendulum head and transmission system, the lamp body constantly swings up and down, left and right multiple degrees of freedom, and the built-in control system of the lamp body controls the brightness and color gradient of each color LED. Through the adjustment of the control system, the lighting can produce a variety of colorful jujube effects, such as neon, wandering, free rotation, following, dotting, displacement and other modes, making the atmosphere of the performance or event more warm and exciting.

Summary. Pro, moving head lamp is a high-tech product integrating electronics, mechanics and optics. It is mainly composed of three major systems: optical, mechanical, electrical and program control.

The optical system design mainly considers the luminous flux utilization rate of the light source, which is characterized by compactness, high brightness, high color temperature, good color rendering, and the light source can maintain a relatively stable color temperature in the process of dimming.

Pro, moving head lamp is a high-tech product integrating electronics, mechanics and optics. It is mainly composed of three major systems: optical, mechanical, electrical and program control. The design of Yuantan optical system mainly considers the luminous flux utilization rate of the light source, which is characterized by compactness, high brightness, high color orange temperature, good color rendering and the color temperature of the lamp source in the process of dimming.

Supplement: Moving head lamp is usually used in the stage, square, professional moving head computer light is a set of electronic, mechanical, optical as one of the high-tech products.

Moving head light connection.

1. Introduce the external structure of the moving head lamp, and the lamp is made of stupid cover shell.

Base, signal cable and power cord inlet and outlet. There are many classifications of moving head lights, there are 1200 watts, 550 watts, 230 watts, 200 watts, etc., in recent years, there have been low-power beam moving head lights, almost replacing the previous application of 1200 watts of computer moving head lights, but the application principle of its eyes is the same.

2. Connect the power supply of each computer moving head lamp to ensure that each moving head lamp is energized, and then connect it according to the import and export of the signal line.

3. Use the signal cable to connect the moving head light to the console.

First of all, you need to install the mount, and then make sure that your hook can withstand your moving head light, otherwise it may fall off at any time. Then fix the light hook with screws.

Each hook has 3 mounting points on the base, and the mounting points are selected according to the hanging orientation. Insert the fastener. Install another light hook. If the stand can be lowered, you can hang the light directly on the catamaran.

Use a safety rope and the safety rope is mounted in a suitable hook connection. Finally, the horizontal and vertical locks are fine if they have been opened. However, it is best not to have flammable materials within 1 meter of the moving head lamp, otherwise it is easy to ignite.

Take a look here, they also have quite a few moving head light models.

Moving head lights are usually used in the stage, square, Shanghai Ou Xingde lighting has a great role in the promotion and development of computer moving head lights, professional moving head computer lights are a collection of electronics, machinery, optics as one of the high-tech products.