XR separator triple pipe principle?

The following are some common questions and working principles of the three-separation separator to answer for you, I hope to help you.

The working principle and characteristics of the three-separation separator.

Although the sprinkling of the three-separation separator is also realized by the rotation of the grading mechanism, it is different from the first and second generation separators: in principle, the sprinkling of the O-SEPA separator is completed by two parts of continuous operation process. The first process is to throw the powder onto the baffle plate by the upper sprinkler tray of the grading cage; The other process is to mix the thrown powder with gas powder by rotating air flow, and form a two-phase flow of gas powder through gas powder mixing.

The effects of both processes have a direct impact on the spreading effect of the O-Sepa separator. The first is the uniformity of the material curtain distributed along the circumference of the 360° powder thrown by the sprinkler tray, and the second is the adequacy and timeliness of the "gasification" process of the material curtain by the rotating air flow, which will affect the grading effect of the powder separator on the mixed powder. Sufficiency and timeliness are important here.

The structure that has an impact on the spreading effect: the number of feeding points, the position of the feeding point on the spreading tray, the structure of the spreading tray, the position of the baffle plate, the gap between the baffle plate and the spreading tray, the length of the baffle plate, the gap between the rotating cage and the guide vane, etc. The working parameters that affect the sprinkling effect are:

The rotation speed of the scattering pan, the amount of material processed, the gas flow, the radial and tangential velocity and velocity distribution of the rotating gas flow, etc.

What is the difference between a three-separation separator and a rotor separator?

1. The three-separation separator adopts a high-pressure centrifugal fan, and the rotor separator uses a medium-pressure centrifugal fan.

2. Guide blades are used around the rotor of the three-separation separator, and guide vanes are not used in the rotor separator.

3. The grading rotor is different.

4. The grading principle is different.

5. The sprinkling tray is different.

Problems with the three-separation separator.

After a period of observation and analysis, the following influencing factors were found:

1) The fixing bolt of the guide vane is broken. This can easily lead to a change in the angle of the blade, which not only affects the quality of the product, but also has the possibility of falling.

2) The fixed shaft of the guide vane is seriously worn, and cracks appear locally.

3) The length of the guide blade is 3680mm, and the blade span is too long, which leads to large vibration during operation and unstable sorting airflow, which affects the sorting efficiency of the separator.

4) The rotor blades, fixed plates and flanges are seriously worn, causing the rotor blades to fall off.

The above is the knowledge and skills of the three-separation separator introduced to you, learning the above knowledge, it is very helpful for the use of the three-separation separator, which is also the place that novices need to pay attention to. If you still have any questions, you can click on the manual service on the right, and we will have a professional person to answer for you.

His principle is basically operated according to his process, and the one he chooses is the same.