How to plant bowl lotus

1. Soak seeds to promote germinationPut the broken bowl lotus seeds in warm water, the water temperature is between 20-40, if the temperature is too high, although it will grow quickly at first, it will be inhibited later. If the temperature is too low, germination will be slow. Usually the seeds can germinate after 3 days of soaking, and the water should be changed once a day, and the seeds that cannot germinate should be removed.

2. PlantPrepare a plastic flower pot, fill the bottom of the pot with lotus pond mud, plant the germinated seeds into the soil, usually only plant one plant per pot, add an appropriate amount of water after planting, and the water surface can not be over the lotus leaves. During its growth period, it needs to be properly exposed to light, receiving 6 hours of light a day, and at the same time, it is necessary to add water in time to keep its water level unabated. Then apply some water-soluble fertilizer to supplement nutrients.

1. Planting time.

The seeds of the bowl lotus can be sown in all seasons. As long as the water temperature is controlled at about 16, the seeds can germinate normally. The suitable growing temperature after germination is 15 30 °C, and for families with low indoor temperatures in winter, sowing can be done in spring.

2. Preparation of materials.

Bowl lotus seeds, files, silt, white pots, sand.

3. Seed treatment.

First of all, the seeds are cracked, and when you eat lotus seeds, you will notice that there is a layer of green skin on the outside of lotus seeds, and the outer skin becomes black and hard when the lotus seeds are ripe. It is said that as long as this layer of white skin is retained, lotus seeds can be buried in the soil for a hundred years or even the year before without decaying. If you don't handle the seeds before planting the bowl lotus, I'm afraid you won't be able to see it germinate in your life.

One end of the lotus seed is pointed and the other end is round. Make a small hole at the end of the circle, grind it on the rough concrete floor or break it with a file. In short, be sure to open your mouth to allow water to penetrate into the seeds and germinate as soon as possible.

4. Soak seeds to promote germination.

The next step is to soak the broken seeds in 30 warm water for germination, soak them for 2 7 days, and change the water 2 3 times a day. Generally, small sprouts will grow on the 5th day, and if they have not germinated in 7 days, they will not germinate, and this type of seed will be thrown away.

In addition, the water temperature of soaking seeds is controlled at about 30, not higher than 40 or lower than 20, otherwise the seeds germinate slowly.

5. Water cultivation seedlings.

After the seeds germinate, place them in an environment of 25 for 5 to 7 days hydroponics. In the process of hydroponics, ensure that the water is about 10 cm, the light is sufficient, and do not change the water and turn frequently, so as not to affect the growth of the leaves.

After a period of hydroponics, the first leaf and the second leaf are about to grow and grow white roots, at which time you can plant in the mud.

6. Pot selection and planting.

According to the needs of planting, put the prepared silt or fine sand into the Huawang Gaichai pot, add soil and water, fertilizer, stir evenly, and let it stand. When the water is clear, plant the seeds of the bowl lily. The seeds are all rolled into the mud, and the leaves are freely stretched on the water surface, and the water must not be submerged over the leaves.

In addition, during the planting process, it should be handled with care and not broken petioles.

Bowl lotus can be planted in all seasons, but it has higher requirements for temperature, the temperature of the water should be controlled at about 16 degrees before germination, and the temperature should be controlled at 15 degrees to 30 degrees after germination, and if the indoor temperature is low in winter, it will be sown in spring.

The seed shell of the bowl lotus is hard, and before planting, you should find a way to make a small opening at the end of the round head, which can be carefully pinched with tongs or worn on the ground, and only the opening can soak the water in.

Soak the broken seeds in warm water, the temperature of the water is about 30 degrees, soak for about a week, you need to change the water 2 to 3 times a day, and it will germinate in five days.

After germination, hydroponics should be carried out, the temperature should be controlled at about 25 degrees, soaked in water for 5 to 7 days, during which there should be sufficient light, and the water depth should be about 10 cm, until roots and leaves grow.

After the leaves grow and take root, they can be planted in the potting soil, and when planting, all the seeds are pressed into the silt, and the leaves should be stretched on the surface of the water, and the water should not flood the leaves.

1. Soil. We all know that bowl lilies usually grow in ponds, and lotus flowers grow well in such an environment, so when we plant lotus lotus, we can also make celery to simulate the environment in which this soil is used. We can cultivate it with paddy soil or pond mud.

This soil is rich in nutrients and humus, which allows the bowl lotus to thrive and bloom more beautifully. Hydroponic bowl lilies can grow more beautifully. We can put half a pot of soil and add half a pot of water, so that we can use the soil and mountains to help Wanlian take root, and use a small pond to grow, so that Wanlian will be easier to grow and grow long leaves.

2. Sow seeds. The cultivation of bowl lilies is very difficult. In order for it to take root and sprout as soon as possible, we need to properly dispose of its shell.

We can polish off the bumps that Wanlian planted on the cement floor, so that the water can penetrate into the seeds, and the seeds can easily germinate after completely absorbing water. Broken seeds can be soaked in warm water for a few days and replaced every two or three days so that the seeds can germinate quickly. After germination, we can put the seeds in the soil or plant them in hydroponic pots.

3. Fertilization. If the bowl lotus wants to grow fast and bloom beautifully, we must give it enough nutrients. Timely fertilization is necessary.

Lacking nutrients, the willow will become thinner and thinner, and the leaves will be small and yellow. Wanlian is rich in nutrients, the leaves are verdant, the flowers are brilliant, and they are full of vitality. Therefore, we can apply fertilizer in half-monthly and one-month cycles according to the principle of thin fertilizer and frequent fertilization.

4. Illumination. Bowl lilies need a lot of light to grow. We need to let it receive more than 5 hours of light a day, otherwise it will lead to a lack of light and affect its strong growth.

Post-seeding light management requires more sunlight exposure. If the leaves of the bowl lotus are much longer, we can prune some appropriately to increase the permeability of the interior. Semi-shade cultivation is required in summer to avoid leaf burns caused by strong light.

How to grow bowl lily?

1. Appropriate amount of watering, in the early stage of the growth of bowl lotus, we must pay attention to the amount of watering, if the watering is too much or too little, it is not conducive to the growth of bowl lotus. Although bowl lotus can be sown with seeds, if it is raised with lotus root, it will bloom faster and be easier to take care of.

If you water too much at this time, it will cause it to take root and sprout, if there is too much water in the container, the soil is scarce, then it is easy to cause the lotus root to rot. Therefore, when growing, don't give too much water in the early stage, if the leaves are submerged, it will be easy to drown the seedlings that grow.

In the later stage of growth, it is necessary to pay attention to keeping the container of planting bowl lotus, and there can be no lack of water, otherwise it will be easy for the leaves to wilt and dry up, the leaves are yellow, and the flower buds fall off and cannot bloom.

2. How to fertilize the bowl lotus, the bowl lotus actually likes the fertile soil very much, and likes fertilizer very much, but there is no need to use heavy fertilizer, before planting, in the cultivation soil, add a small amount of cake fertilizer to make the bottom fertilizer, and there is no need to give fertilizer after growing leaves.

In the summer, in order to make its flowering period longer and prolong for a period of time, you can put a small lump of rotten cake fertilizer in the mud, do not put it in the water, and do not put too much, so as not to burn the leaves and hurt the roots. This needs to be kept in mind when fertilizing.

Bowl lotus is a common hydroponic plant, can be sown all year round, first the selected seeds are germinated, and then make a big fuss to prepare a nutrient solution rich in organic matter, after planting, maintain 6 7 hours of light time a day, warm up in winter, change the water treatment every six months, so that the bowl lotus will grow luxuriant.

Bowl lotus is a relatively common hydroponic plant, generally hydroponic-based, and can be planted throughout the year, and is mainly planted in summer, summer is the peak period of growth of bowl lotus, in 20 30 when the growth is faster, the summer yield is also the largest.

How to plant the bowl lotus in the four seasons is the best, the rolling bridge cover is generally the first to promote germination, because the seed coat of the bowl lotus is relatively hard, there will be a small bump at both ends, and then use a knife to cut the raised part, and then wipe the upper part clean, with a vice, remember not to hurt the kernel inside.

Then put the cut seeds in warm water, keep the water temperature at 30 40 optimally, put it in a ventilated environment, if the temperature is too low it is best to heat it, it is best to keep it at about 30 best, when the temperature is higher than 30, the seeds germinate quickly, about 3 5 days can germinate.

Then choose a larger pot, which is loaded with an appropriate amount of pond water, pond mud or garden soil, you can appropriately add some river sand or gravel and other most substrates, and then add a small amount of nutrient solution to it, and then the seeds are pressed into it, it is best not to flood all the best, and leave the top small leaf seedlings.

It is best to maintain sufficient light after planting, it is best to ensure a minimum of 6 7 hours of light time every day, shade when the temperature is higher than 35 in summer, and it is best to fill in the light treatment when the temperature is too low in winter to promote the growth and development of plants.

After planting bowl lotus, you can appropriately apply a small amount of organic fertilizer solution, about 1 time a month is the best, every six months for water change treatment, to avoid the invasion of germs, when the plant is up to 6 10cm, the amount of water should be increased, to ensure that the nutrients required during the growth period are sufficient.

Bowl lotus seeds need to be planted in the middle or at the edge with the bud point facing up.