What to do if you can t access your LenovoEMC storage device

Dear users, hello!

This is the Lenovo FAQ knowledge base, which has a relatively complete answer and know the process and analysis:

Consult Lenovo 24 hours a day to interact with engineers in the Lenovo community if you have any questions:

Set the phone to turn on the mass storage.

Android phones need to turn on mass storage. iPhones require software to access.

There may be a problem with the thread, so let's check it.

Hi! What brand is your mobile phone, what model, what system?

The inability to access the specified device path or file may be caused by a ban on the administrator accountDisabling the account in the computer menu for local users and users in the group will solve the problem.

1. First of all, right-click [Computer] and click [Manage] function.

2. After opening the computer management interface, click [Local Users and Groups] in the left menu, and click [Users] below.

3. Check whether the [Account Disabled] in the administrator attribute interface is checked, and if it is checked, it will be canceled, so as to ensure that the administrator account is running.

4. Finally, right-click the mouse to not prompt [Windows cannot access the specified device, path or file] file, right-click the mouse and click [Properties], select [Administrator] in the group or user name, and select all the permissions below as [Allow] to solve the problem.

If this page appears, it may be that the software has a virus or the file has been damaged, so it is caused by the prompt blocking of the security software. If you feel that this software is safe, you can choose to "dismiss" and add it to the trust. If you don't feel safe, you can select "Clear now and scan fully".

Fault phenomenon

When double-clicking or right-clicking to open a disk on a computer, an error message "Inaccessible" appears.

Cause analysis. Sudden power failure or forced removal of the hard disk during use may cause damage to the disk and the location is unavailable.

The partition table is corrupted, resulting in incorrect reading of partition information and the failure to read the file system.

The data cable or power cable of the hard disk is not in contact with each other, resulting in incomplete reading of the information on the disk.

If the hard disk has bad sectors, when the location of the bad sectors is at the key position of the file system, the entire partition file system will not be able to read normally.

The user privilege is too low to access the disk.

Resolution. If there are no important files in this disk, you can format the disk directly.

If the file is not too important, it is best to keep it, you can use the command to repair it directly (the feature is fast, but there is a risk of repair failure) to operate the desktop in the lower left corner of the "start"-run-cmd type chkdsk h: f (h disk that needs to be repaired), and wait for the repair to be completed.

folder questions.

It's still like this when it's clicked.

Ask a private message.

Answer: I click on your avatar to send you a private message, you can take a look at it, I can not, don't reply to this message, you can click the right mouse button, and then click to open it as an administrator to try to ask a question, or so, handsome guy, help, [tears] [tears] Answer you don't worry, don't reply to the message, follow my next steps to try to click on the computer desktop on the computer, or my computer icon, and then open this computer, and then click on the d drive with right clicking, and then in the tab that pops up, Click Properties to open the Properties window.

After that, we click on the security option at the top in the inner panel.

We select our own username in it, click on it.

In the user permissions inside, turn on all the permissions, and click Apply Now.

If that doesn't solve the problem, let's click on the advanced button inside and make advanced settings inside.

In the window you enter, click on the Owner option above.

We click on the owner, which is the click of the owner of the program running.

Then we select the user, check the box below to replace the owner of the subcontainer and object, click Apply and OK.

This will change the ownership, and the problem should be solved.

Here are some things you can try:

1. Open the properties of the partition where the software is located, enter the security page, select the account of "administrator", and change all the options of "administrator's permissions" to allow.

2. Click on the advanced options in Add on the security page, enter the 'Select User or Group' window, use "Find Now", select the administrator account, and then change all the options to Allow.

3. Open the properties of the partition disk where the software is located, enter the security page, open the current administrator account in the "Group or User Name", open "Advanced", "Owner", "Current Owner of the Project", and you will see a string of "s-1-5-21-147001333-1580818891-1708537768-500"; Click on the username under 'Name', check "Replace owner of sub-containers and objects", and then confirm to exit. After waiting for a while, it's time to open the program you want to open.

It can be set up like this.

The specific steps are as follows:

1.Find the folder, right-click, click to open the properties window, switch to the "Security" bar, and open "".

2.In the Permissions window, click Add.

3.Enter the account name of the user account in the Select User or Group window, click the "Check Name" button, and click OK.

If your computer is unable to browse the web, you can troubleshoot the problem according to the following conditions:

1. Broadband is not connected. Reconnect to broadband.

2. Router failure. After removing the router, try out the broadband connection.

3. Occasional failures, such as ADSL disconnection, computer memory data overflow, etc. Restart the computer and try the modem.

4. Browser failure, inappropriate application of ** server. Uninstall all browser plug-ins and restore the default settings of Internet Explorer for a trial. Remove the server settings. Reinstall the browser program.

5. Improper IP address and DNS settings. The IP address of a general household user is automatically obtained and the DNS server address is reset.

First find the folder that denies access, right-click on it, select Properties, and then switch to the security option, and then you can see that there are advanced settings in the bottom department, first click on the advanced options at the bottom, and then the advanced settings box of the folder will pop up Properties, and then we switch to the owner tab, at the bottom of which you can find the operation option, after clicking the option, double-click the user account in the new pop-up window, note that you must select the following to replace the owner of the subcontainer and object, If you don't select this item, after we open this folder, we still can't open the subfolders below, click Apply after selection.

In Explorer, right-click and select "Open......"If it can be opened, it must be a virus.

If it can't be opened, the next USB flash drive repair software will fix it and take a look.

1. Right-click the article.

Folder du (or file) - zhi attribute "--andaoquan" tab. If you can't find the "Security" option, please click "Tools" - Folder Options "- View" - in the toolbar - remove the "Use Simple File Sharing (Recommended)" checkbox - "OK".

2. Click the "Advanced" button - the "Owner" tab. The Current owner of the item box reads: "The current owner cannot be displayed. "The problem has been found - the admin user is not the owner of the folder!

3. In the Change Owner to Administrators box, click the new owner (administrator or administrators) and select the Replace Owner of Subcontainers and Objects check box. Click the "OK" button.

According to the information provided, such as the occurrence of wide du

With a fault, zhi

You can first troubleshoot the problem by using the following DAO methods:

Back 1 Use stand-alone dialing, if any.

I just ran into this problem...

du…As a result, I turned off the antivirus zhi software, and then it started. I use the Kaspersky version, Kaspersky defaults to untrusted some programs, and it's OK to manually change it to trusted.

So, if your computer is virus-free, you disconnect from the internet and turn off your antivirus software. See if you can open the program, and if so, it means that the antivirus software defaults to the program as a dangerous program that cannot be trusted. Manual shuffling, in the antivirus software to set the program to trustworthy OK.

It seems to be a virus.

Start, Run, Type Regedit, Find, Delete. Reboot.

Press F8 to delete in safe mode when booted, or delete under DOS!

Workaround:

1. Check the properties of the C drive and switch to"Safety"tab, then dot"Add"and select an Administration.

member account, point"OK"。Then log in with this administrator account (log out or restart the computer) 2. The system has a virus, and it is possible that the file association has been modified. The solution is to restore the file associations.

3. Safety software is installed in the system, such as System Safety Monter software.

4. Turn off the anti-virus software and firewall to see if the fact is not open.