The solar water heater has not been on for a month, and the original filled water is gone

There are two situations of water leakage from the solar air vent, 1. The water overflows after being filled. 2. Water vapor liquefied dripping water. If the hot water faucet can't release water, you can open the water valve to enter the water first, and then try to see if the water can be released.

If the water is still not released, the outlet pipe is damaged.

Wandering Mage: Positioning: Auxiliary Control (Single Control) CD Time is Fast Early Harassment Strong Outbreak is Not Strong, If You Want to Kill and Want High Explosion, It Is Not Recommended to Choose Little Mage:

Positioning: Control (group control) outbreak is strong Annie: Annie's main role is group control, the group output is relatively strong, and the consciousness is very conscious, and the team battle is dizzy to a piece and basically wins the individual or.

First of all, you should confirm whether the water is full, it may be that there is a problem when the water heater is installed, the water in the water tank cannot be filled at all, or the water pipe is frozen and cracked in winter, and the water is not satisfied, so it is still very wastewater. If it is filled with water, then the problem is like the first floor said, it is possible that the solar tube is broken.

System issues, basically a few times a week, OK now.

。。。Who's playing 090 sent it to me, please you should be out in May May It's already 16 It's out in June I'm playing, in the Android market Is your phone an iPhone? If yes, you can't go down!

On Android is the test! The iPhone can only be downloaded at the time of the official version! If.

If it is a problem with the water pipe, please check whether it is flowing from the upper or lower water pipe.

Summary. 1. The water in the water tank has been emptied, and it can be used after it is full of water and heated.

2. The pipeline interface falls off or is blocked, and the pipeline is reconnected or dredged.

The water tank of the solar water heater is full, but the water can't be released after a while, what is the reason?

The reasons why the solar water heater does not produce water are as follows:

1. The water in the water tank has been emptied, and it can be used after it is full of water and heated. 2. The pipeline interface falls off or is blocked, and the pipeline is reconnected or dredged.

3. In winter, the upper and lower water pipes may freeze. The sun melts on its own about 3 hours after it comes out. In cold areas, a vent valve can also be installed.

4. The upper and lower water valves are leaking, the upper water valves are also leaking, and the water pipe has no water for a long time, resulting in water backflow, which needs to be repaired and solved.

5. The water tank is full of water but the water can't be opened, this may close the water inlet valve for you, so the hot water can't flow out. If the water is available (i.e., a product that has been used for several months), there is a chance that the outlet valve is broken or the pipe is clogged. It cannot be ruled out that the water inlet pipe and valve are also blocked.

It could be that the water from the solar water heater is faulty or the pipes are clogged and the water cannot flow out. It is recommended to check whether the pump is working properly and clean the pipeline. If the problem persists, it is recommended to contact a professional maintenance personnel for repair.

Hello, 1. The water pressure is not enough to cause the solar water heater to not produce water.

For rural users, if the roof is covered by a large tree, the solar water heater must be installed on the platform next to the house, or build the platform by yourself.

When you live upstairs and use hot water, because it is higher than the solar water heater, the water pressure may not be enough, resulting in the inability to produce water.

2. The water pipe is blocked, causing the solar water heater to not produce water.

The water pipe of the solar water heater is used for a long time, and the water pipe is easy to be clogged when the water is usually filled with too much scale, or if there are debris entering. If there is an unknown object blocking the water pipe, it can also cause the water pipe to become clogged. Once the water pipe is blocked, it will cause the hot water in the solar water heater to not work properly**, and the hot water will not be released.

3. The problem of stringing water causes the solar water heater to produce no hot water.

One of the reasons why solar water heaters don't produce hot water is the problem of stringing water. When installing a solar water heater, there are many pipes, and if the cold water flows out, it may be a phenomenon of stringing water.

4. The valve failure causes the solar water heater to not produce water.

The water pipe valve is an important equipment used to control the water output of the equipment, and the opening and closing of the water pipe valve determines the release and stop of the water. If the valve fails, it will lose control and the water will not be released.