Hongchuang electronic clock 005 how to turn off the alarm

Here's how:

1. There is a yellow pointer in the alarm clock, which is used to indicate the alarm clock time, the alarm clock in the picture below is 1 o'clock, and the alarm clock will ring after one o'clock, whether it is 1 o'clock during the day or at night.

2. For example, if I need to set an alarm clock now, I can adjust it through the alarm knob at the back

<>4. Next, turn on the alarm switch, otherwise the alarm clock will not be turned off even if the time is up, and the alarm clock will be turned on.

5. Next, the alarm clock will ring after the time is up, and you can turn off the alarm clock after waking up, otherwise it will keep ringing for an hour. off turns off the alarm. Note that here, OFF is to turn off the alarm.

6. There is also a knob behind the alarm clock, which is to adjust the time when the time is wrong. If the timing is correct, it is generally left alone.

The operation method of Hongchuang electronic clock to turn off the alarm is as follows:

Turn off the alarm alarm:

1. Press the setting button (3-5 seconds) until you enter the alarm setting state, and then press the setting button again to select the corresponding alarm grouping;

2. After selecting the group, press the up button, and "--means that the alarm clock has been canceled;

3. Press the exit button to exit the alarm setting state.

Turn off the alarm on the hour: Press the up button.

Or just cut the speaker wire inside the digital perpetual calendar.

We hope you find it helpful.

Kiss; The operation method of Hongchuang electronic clock to turn off the alarm and beat the bell is as follows: turn off the alarm clock alarm: 1. Press the setting button and do not copy (3-5 seconds) until it enters the alarm setting state, and then press the setting key again, you can select the corresponding alarm Yu Meng bell grouping; 2. After selecting the group, press the up button, and "--means that the alarm clock has been canceled; 3. Press the retreat button to exit the alarm setting state.

Turn off the alarm on the hour: Press the up button. Or directly cut the speaker line zhidao in the digital perpetual calendar.

We hope you find it helpful.

Summary. 3. Press the retreat button to exit the alarm setting state. Turn off the alarm on the hour: Press the up button. Or directly cut the speaker line zhidao in the digital perpetual calendar.

The operation method of Hongchuang electronic clock to turn off the alarm is as follows: Turn off the alarm clock alarm:1

Press the dry draft setting button and do not copy (3-collapse 5 seconds) until you enter the alarm setting state, and then press the setting button to select the corresponding alarm clock grouping; 2.After selecting the group, press the up button, and "--means that the alarm has been canceled" will appear.

3. Press the retreat button to exit the alarm setting state. Turn off the alarm on the hour: press the Upper Hail button. Or those who don't have a sail can directly cut the speaker line in the perpetual calendar for a few years.

This mainly depends on the specific model of the electronic perpetual calendar, I recommend the general electronic perpetual calendar alarm setting method, for reference: 1. Time setting: a--- date and time setting Move b--- hourly alarm switch Increase C--- throttle lamp pattern conversion Reduce d--- set alarm setting Move (take setting January 28, 2010 10 38 a.m. as an example) press the "A" key, "Year" flashes, press the "B" or "C" key, set it to "2010" year; Press the "A" key again to flash the "Month", press the "B" or "C" key to set it to "1" month; Press the "A" key again to flash the "Day", press the "B" or "C" key to set it to the "28th" day; Press the "A" key again to flash "Time", press the "B" or "C" key to set it to "10" in the morning; Press the "A" key again to flash "Points", press the "B" or "C" key to set it to "38" Points; Press the "A" button again, the "second" flashes, press the "b" or "c" button, and the second starts from 00; (Note:.)

This step is not displayed when there is no second digital tube. Press the "A" key again to exit the time setting. 2. Setting the alarm setting:

Press the "D" key, enter the setting of the alarm, the position of the monthly digital tube displays the alarm serial number, the serial number flashes, press the "B" or "C" key, you can select a certain setting in the alarm 1 4; When you press the "D" button again, it flashes, and press the "B" or "C" key to adjust it to the set value; Then press the "D" key to flash, press the "B" or "C" key to adjust it to the set value; Press the "D" button again, display the alarm status of "on" or "--" in the position of the digital tube and flash, press the "B" or "C" button to turn off or turn on the alarm, and then press the "D" button to exit the alarm setting. Note: As long as 1 or more of the 4 alarms are set to on, the alarm indicator will be on, and only when all the alarms are off, the alarm indicator will be off.

3. Setting of the alarm on the hour: In the normal operation state, press the "b" button, and the alarm indicator light on the panel is "on" to indicate that the alarm on the hour has been turned on, otherwise, the light is "off" to turn off.

The operation method of turning off the alarm on the hour of the electronic perpetual calendar is as follows:

Press the up button or the B button.

Here's how to turn off the electronic perpetual calendar timer alarm:

1. Press the setting button (3-5 seconds) until you enter the alarm setting state, and then press the setting button again to select the corresponding alarm grouping;

2. After selecting the group, press the up button, and "--means that the alarm clock has been canceled;

3. Press the exit button to exit the alarm setting state.

Hello, the settings of the Hongchuang perpetual calendar and the settings of other electronic perpetual calendars will not be very different, there may be a slight difference.

1. Time setting:

a--- Date & Time Settings Move.

b--- Alarm switch on the hour has been added.

c--- Reduction of throttle lamp pattern change.

d--- Set the alarm settings to move.

Take the setting January 28, 2010 at 10:38 a.m. as an example).

Press the "A" key to flash "Year", press the "B" or "C" key to set it to "2010";

Press the "A" key again to flash the "Month", press the "B" or "C" key to set it to "1" month;

Press the "A" key again to flash the "Day", press the "B" or "C" key to set it to the "28th" day;

Press the "A" key again to flash "Time", press the "B" or "C" key to set it to "10" in the morning;

Press the "A" key again to flash "Points", press the "B" or "C" key to set it to "38" Points;

Press the "A" button again, the "second" flashes, press the "b" or "c" button, and the second starts from 00; (Note: This step is not displayed when there is no second digital tube.) )

Press the "A" key again to exit the time setting.

2. Setting the alarm setting:

Press the "D" key, enter the setting of the alarm, the position of the monthly digital tube displays the alarm serial number, the serial number flashes, press the "B" or "C" key, you can select a certain setting in the alarm 1 4;

When you press the "D" button again, it flashes, and press the "B" or "C" key to adjust it to the set value;

Then press the "D" key to flash, press the "B" or "C" key to adjust it to the set value;

Press the "D" button again, display the alarm status of "on" or "--" in the position of the digital tube and flash, press the "B" or "C" button to turn off or turn on the alarm, and then press the "D" button to exit the alarm setting.

Note: As long as 1 or more of the 4 alarms are set to on, the alarm indicator will be on.

When all alarms are off, the alarm indicator will be off.

3. Alarm setting on the hour:

In normal operation, press the "B" key once, and the hourly alarm indicator on the panel is "on" to indicate the hour.

The alarm is on, otherwise, the light is off.

Hope it helps!

Hongchuang HC-006B electronic clock how to turn off the alarm clock.

According to the teacher, the HC-006B electronic clock can be turned off by two methods, one is to use the button to operate; The other is to set the shutdown time: 1. Press the chain to carry the game button to operate: turn on the power and start setting the alarm clock, first press the SET ON button, the indicator light is on, press the hour button to set the alarm hidden clock, and then press the min button to set the minutes; If you want to turn off the alarm immediately, you can short press Set OFF, and the alarm will stop ringing.

2. Set the closing time: You can set an alarm clock first, and then set the closing time to the time when you want to turn off the alarm clock, for example, the shed pin is turned off at 5 pm every day. When the set time is reached, the HC-006B electronic clock will automatically turn off.