Why does the Canon 5D IV camera battery keep ringing when I put it in?

It's normal that it's the sound of the camera moving, and the squeak should be very regular.

The squeak that every camera has is the sound of his autofocus.

Once you've put the battery on, the camera is ready to self-test.

Is it a mismatch between the batteries, it is possible that this is the case, or the voltage of the battery is unstable.

If the battery in the camera keeps ringing, it may be because the battery specification is not quite correct, so you can change the specification.

So if you keep thinking about your physique, it should be a case of poor contact with him, and you can also do it again.

After the battery is put on, the constant ringing is definitely inappropriate, and it is difficult to speculate on the specific reason.

Canon Five, its battery or camera, the battery will not be messy after it is put in, because it is relatively ***, so it will not break.

In this case, the battery should be installed incorrectly, and it is recommended to reinstall the battery.

It is recommended that you call the official customer service number of the Canon camera to inquire. Kiss the customer service staff, what is the cause of this?

After the Canon Invincible IV battery camera is put in, it will keep ringing, which means that this should not work, and a new battery should be replaced.

When the Canon 5div camera battery is put in, why does it keep ringing? Let's take a look at the after-sales service, and don't break the camera again.

Definitely won't go down, if you want to think about what's wrong? It led her to call the police.

Why do you want the battery to keep ringing after you put it in? Shouldn't this be if the battery is running out?

5D IV camera battery after insertion, the battery symbol keeps flashing, indicating that the battery is depleted, please charge the battery in time or replace the battery with sufficient power after powering off.

New batteries generally take a little longer to charge, about 8 hours; If you have already used it, you only need to charge it for 4-5 hours.

After the camera battery is fully charged, this may be that the battery is dead, and it is basically impossible to install it in reverse, and it can't get in the reverse!

In the case that the camera is indeed good, first, the battery is reversed, first.

Second, the battery is unavailable or has no power!

It's so easy to find after-sales.

This is a typical manifestation of the increase in the internal resistance of the battery, the voltage of the high internal resistance battery drops sharply when the high current is discharged, and it soon reaches the state of lack of power alarm, and there is still a lot of power inside the battery that can not be utilized, so it is full in less than an hour to charge. Perhaps the original power of the camera has been replaced with a copycat battery by a bad merchant, and the spare battery bought is also a counterfeit. The internal resistance of the cottage battery will be significantly increased after a few times, and the phenomenon of light and full will occur as soon as it is used.

Hello! The battery of the Canon 130 camera is charged for the first time, and there is no need to worry about "how many hours it takes".

The machine uses a lithium battery.

The first charge of the lithium battery is subject to the discoloration of the charger's indicator light, and it can be charged at will, and there is no time limit.

With the continuous improvement of lithium battery manufacturing technology in recent years, the lithium battery on the market does not need to be "activated", and it can be filled at will.

In addition, the life of lithium battery is related to the number of completion of the charging cycle, and there is no direct relationship with the number of charging times.

Simple understanding, for example, is that a piece of lithium battery uses only half of its power on the first day and then fully charges it again. If it is still the case the next day, that is, it will be charged half of it, and a total of two charges will be charged, which can only be counted as one charging cycle, not two.

As a result, it can often take several recharges to complete a cycle. With each completed charge cycle, the charge decreases a little. However, the reduction is very small, and high-quality batteries will still retain their original charge after multiple cycles.

80%, many lithium battery power supply products are still in use as usual after two or three years, which is the reason. Of course, the lithium battery still needs to be replaced in the end when it reaches its life.

The life of a lithium battery is generally 300 500 charging cycles.

Assuming that the amount of electricity provided by a complete discharge is q, if the reduction of power after each charge cycle is not considered, the lithium battery can provide or supplement a total of 300q-500q of power during its lifetime.

From this, we know that if you charge it with 1 2 each time, you can charge it 600-1000 times;

If you charge 1 3 each time, you can charge 900 1500 times.

And so on, if it is charged randomly, the number of times is indefinite.

In short, no matter how you charge, a total of 300Q and 500Q of electricity will be replenished.

Therefore, we can also understand it this way: the life of lithium battery is related to the total charging power of the battery, and has nothing to do with the number of charges. There is little difference between deep and shallow charging and shallow charging on the life of lithium batteries.

In fact, shallow discharge and shallow charging are more beneficial for lithium batteries, and only when the power module of the product is calibrated for lithium batteries, there is a need for deep discharge and deep charging.

Therefore, the use of lithium battery powered products do not have to be confined to the process, everything is convenient, can be charged at any time, do not have to worry about affecting the life.

Moving the camera is equivalent to changing the focal length and refocusing.

When the battery is installed, the camera will communicate with the battery.

If it is an original battery, it may be dead or not fully charged.

If assembled, it may not be compatible with the battery.

It may be that you are ugly, and after the camera is powered on, you immediately decide not to turn it on again.

There is a high probability of running out of power. I haven't heard of a high-end SLR machine that has been assembled.

Didn't you put a CF card?

What to do? Send it for repair, this is still asking.

Try to open it with other software, or open it with Photoshop (to install a plug-in), and then modify it and save it as raw or jpeg, 9228295

PS CS6 or above is OK.,I'm now PS CC 64-bit.,It's no problem to use it.,RAW is all OK.

Upgrade the Camera RAW software for PS.

Go to the official website yourself.

Or modify with lr.