What should I do if the v8 sound card is connected to the computer and the speaker on the computer i

Introduction: The small speaker in the lower right corner of the computer is the icon of the computer sound device, when you want to adjust the volume, you suddenly find that this small speaker is missing, you must be anxious and confused, I believe that many people have encountered this situation, today, I have sorted out the reasons and solutions to this problem, and I will share it with you below.

Under normal circumstances, there will be a small speaker in the lower right corner of our computer, when we need to adjust the volume, we can click on this small speaker to operate directly, which is very simple. But what do we do if the little horn suddenly disappears? The small speaker is missing, which indicates that there are some problems with our computer, and we should solve them in time, otherwise it will cause inconvenience to our use.

Below, let's first take a look at some of the reasons why the little horn is missing.

The reason why the little horn is missing.

1. The sound device is not connected well or disconnected directly, resulting in problems with the computer's sound system, which can directly cause the small speaker to disappear.

2. The computer is damaged by viruses, resulting in system problems.

4. If there is a problem with the driver of the sound device, click "My Computer" on the desktop, select "Properties", "Hardware", then select "Device Manager", click to open the "Sound, ** and Game Controller" option, and see if there is a yellow question mark in front of this item, if there is, it means that there is a problem with this driver.

5. The sound card hardware is gone.

6. The small speaker icon is hidden.

Summary of workarounds.

Knowing the above reasons, we can investigate them one by one, find out the real cause of the problem, and then we need to prescribe the right medicine.

Method 1: For the reason for the poor contact of the sound device, you can directly connect the device; If it is the cause of the virus, you can use antivirus software to detect and kill the virus.

Method 2: Click "Start" on the desktop, select "Settings", then click "Control Panel", select "Add New Hardware" in the "Control Panel" interface, and when the computer searches for the hardware of the sound device, select "No, I haven't added this hardware", click "Next", and then follow the prompts to turn off the computer and restart, and you will look at the small speaker icon.

Method 3: If there is a problem with the driver of the sound device, you need to uninstall the driver, and then reinstall it on the CD disk, and the problem will be solved.

Method 4: The sound card is missing, you need to find the sound card, then put the sound card into the drive disk, and reinstall the sound card driver.

You're going to open it! Otherwise, others won't be able to hear you!

The sound change card means that there is no problem with the hardware. The following is a solution to the system software and settings of the computer without sound problem from several aspects: 1. When there is no sound, look at whether there is a volume icon in the lower right corner, (of course, under the premise that you have set it to a tray to display the sound icon), if so, double-click the volume icon to see if the two columns of "volume control" and "waveform" are muted, if so, please turn on, you can 2. How to have no volume icon in the lower right corner, open the control panel, turn on the sound and audio device, Take a look at the device volume options, here to see if it's muted.

3. If it is not set to "mute", it does not mean that it is set correctly. Because if you use the ** device, the volume of the audio source is larger, the automatic adjustment function will reduce some of the volume, and when you turn off the ** device, the reduced volume is not restored, so you also need to check the advanced settings: in the volume dialog box of the properties, click "Advanced" in the device volume, and see if the "waveform" volume slider in it is turned to the maximum.

4. If everything is normal, open the Device Manager and see if there is a question mark or exclamation mark in the sound part? If you have one, try reinstalling the sound card driver.

Summary. 1.In the lower right corner of the computer, double-click the icon of the yellow speaker with the mouse to open the volume control, and the volume control interface appears, 2Click and select "Properties" in the options menu, and after the "Properties" dialog box pops up, select "Recording", and the "Recording Control" interface appears. Select "Stereo Mixer", 3Go back to the "volume control" (i.e. the interface of 1), temporarily turn on the volume to the maximum (adjust it after normal), if you need to play ** at the same time, you can also talk, such as karaoke, please turn on the microphone volume to the maximum, (adjust it after normal), and unmute the microphone.

4.You're all set up here. Use any kind of software! Slowly adjust the controls for various volumes to achieve the best results. If you can't achieve karaoke accompaniment after adjusting it in the above way, please replace the sound card that supports full duplex.

How to turn off the v8 sound card?

Hello, I'm your counselor and I'm sorting out the answers for you, please wait.

1.In the lower right corner of the computer, double-click the icon of the yellow speaker with the mouse to open the volume control, and the volume control interface appears, 2Click and select "Properties" in the options menu, and after the "Properties" dialog box pops up, select "Recording", and the "Recording Control" interface appears.

Select "Stereo Mixer", 3Go back to the "volume control" (that is, the interface of 1), temporarily turn on the volume to the maximum (adjust it after normal), if you need to play ** at the same time, you can also speak, such as karaoke, please turn on the macro morning microphone volume to the maximum, (adjust it after normal), and cancel the microphone mute. 4.

If you can't achieve karaoke accompaniment after adjusting it in the above way, please replace the sound card that supports full duplex.

I hope mine can help you, if you are satisfied with my service, please give a thumbs up, I wish you all the best!

Summary. Dear, hello, how to connect the V8 sound card to the computer after no sound is the V8 sound card connection cable has a short circuit fault. 2. The connection end of the V8 sound card is not in good contact.

3. There is a problem with the sound card driver. 4. The audio manager is not set up. First, check that your microphone and console are connected correctly.

Workaround: Connect to the red or pink connector on the back of the chassis. See if your microphone is muted.

After turning on the recorder, speak into your microphone, and click the red record button at the same time to see if you can record the sound (whether the green bar of the sound wave flashes up and down), if it is, it means that your microphone is intact, if it can't be recorded, maybe your sound card is not set correctly or the microphone is not connected correctly or the microphone switch is not turned on. <>

What about people. Hello, how to connect the V8 sound card to the computer, there is no sound is a short circuit fault in the connection line of the V8 sound card. 2. The connection end of the V8 sound card is not in good contact.

3. There is a problem with the sound card driver. 4. The audio manager is not set up. First, check that your microphone and console are connected correctly.

Workaround: Connect to the red or pink connector on the back of the chassis. See if your microphone is muted.

Turn on the recording machine, speak to your microphone, and click the red record button at the same time to see if you can record the sound (whether the green bar of the sound wave flashes up and down), if it is recorded, it means that your microphone is intact, if you can't record it, maybe your sound card is not set correctly or the microphone is not connected correctly or the microphone switch is not turned on. <>

Kiss, answer dry for you to expand. 1. It may be that the connection mode is wrong, resulting in a connection failure. 2. First of all, we plug the data cable into the V8 sound card charging Kong Ming Zheng and connect it to the computer.

K song live sound card v8 microphone no sound may be the microphone on the protective film of the praise song,Please confirm whether the protective film is attached to the earpiece。 <>

The V8 sound card can only be used on mobile phones or other devices, and does not support connecting to a computer.

Data Expansion:Tips for using V8 sound cards:

1、V8 sound card has 12 kinds of special effects posture training sound,There are also a variety of scene modes,The processing effect of sound is better。 In the main interface, all kinds of switch buttons have the function of text labeling buttons.

2. The volume knob of the microphone can be rotated more than half a turn when used, so as to ensure that the output sound will not be too small, and the highest frame rate can be maintained.

3. The reverberation knob should also be rotated more than half a circle when in use, so as to ensure that the sound can achieve the best reverberation sound effect.

4. When starting or turning off the V8 sound card, it is best to press and hold the power button for more than three seconds, so that the sound card has enough time to load the pre-settings.

5. The high and low Huaiyin can be rotated about half a turn, the recording function can be fully opened, the knob is best opened for half a turn, and the monitor knob can be adjusted to the appropriate position according to your own needs.

6. It is recommended to insert the various cable sockets of the V8 sound card into the mobile phone, so that it is easy to adjust the options.

7. When switching reverberation mode, you need to press and hold for three seconds to turn off the electronic sound and voice changer, and short press to switch the sound effect.

8. You can choose the line socket connection according to your own needs to ensure that you can achieve the best sound effect and the easiest way to use.

1.It's best to find the original driver of the onboard sound card (when you buy a computer, you will be given a driver disc for the motherboard) and reinstall the sound card driver.

2. After installing the drive. Right-click on the small speaker in the lower right corner of the computer. Choose a recording device, enter the computer microphone, plug in the current and make a loud noise.

3. Right-click on the microphone to select properties.

The solution to the loud sound of the current plugged into the computer microphone.

4Choose 2 channels in the advanced, 16-bit, 48000hz (*** sound quality),,This is very important。。。 If you choose another type of current, it will be loud.

The solution to the loud sound of the current plugged into the computer microphone.

The microphone reinforcement in the 5 levels is selected to the minimum.

The solution to the loud sound of the current plugged into the computer microphone.

6. In the enhancement options (DC offset cancellation) (noise escalation) (echo cancellation), all select the check number... Are you sure... This time, do you see if there is still the sound of electricity... I can feel the effect on YY's microphone calibration.

The solution to the loud sound of the current plugged into the computer microphone.