How to construct wood oil on furniture, what kind of oil to wipe wooden furniture with

It is not recommended to use wood oil on furniture, and it is recommended to choose wood wax oil. The two construction methods are basically the same.

1. Polishing the wood, cleaning the dust and dirt on the surface, and ensuring that the surface of the wood is dry.

2. Stir the wood (wax) oil evenly, and brush it thinly along the wood grain.

4. Polishing and grinding, polishing the surface of wood (wax) oil with more than 1000 mesh fine sandpaper or polishing cotton can improve the feel and increase brightness.

Wood (wax) oil construction is relatively simple, inexperienced personnel can also operate, but there are still some matters that need to be paid attention to during the specific construction, it is recommended that you consult relevant personnel according to the actual situation before construction to avoid rework.

1. Substrate treatment:

White billet requirements: the moisture content of wood does not exceed 20%.

Sanding: Sanding the wood with sandpaper until the surface is smooth and smooth. Sandpaper should be used from small to large, and the larger the number of sandpaper meshes, the more delicate the grinding effect. The finer and smoother the wood surface, the better the effect of wood wax oil, and the more economical wood wax oil is.

Hole filling treatment: fill the nail holes and knotted scar holes with transparent or putty of the same color to be flat.

Cleaning treatment: make the surface of solid wood furniture clean and dry before painting, free of grease and dust.

2. Operating instructions.

Wood wax oil furniture wood natural color construction.

Stir: After opening the can, the wood wax oil is fully stirred until it is even.

Dilution: If you feel that the wood wax oil is viscous during construction, you can add a special thinner for Cheresisi to dilute it to facilitate construction.

Brushing: Use cotton cloth, bristle brush, roller and other tools to evenly extend the paint in the direction of the wood texture and rub or apply thinly, do not need to rub too thick, after slightly drying, if there is uneven paint on the surface, wipe off with a clean cotton cloth to make the surface of the coated wood smooth. The surface of the wood is painted in place, leaving no dead corners.

Operation method: direct brushing, no primer, stirring evenly, the number of thin rubbing according to the actual needs, generally 2 3 times. During the construction process, the climate and environment will affect the drying speed, so after the first construction is completed, it is necessary to ensure that the second time can be wiped after the construction is done.

Polishing: If you need gloss, you can use scouring pad or polishing cotton to polish it after drying to achieve a bright effect.

To be colored, please note the following:

1.If you need to color, please use the wood wax oil with a good color paste for thin rubbing or thin coating, the number of thin rubbing according to the actual needs, generally 2 3 times, between each time it needs to be completely dry, before the next thin wipe, between the thin wipe and the thin wipe remember not to polish, so as not to fade.

2.After all the coloring and wiping steps are completed and have been dried, it is recommended to rub the transparent wood wax oil on the surface again, and after drying, you can use 1000 sandpaper or polishing cotton to slightly polish the surface layer, and clean the surface sanding dust to enhance the feel and improve the performance (except for spraying, it is not recommended to polish).

3.Before the coloring construction, it is recommended that the color paste and wood wax oil are stirred evenly and the color is adjusted, and then the DIY is wiped with a cotton cloth on a small wooden board, and the color is satisfactory before the large-scale construction is carried out.

Wood oil and wood wax oil are generally used.

Wood oil and wood wax oil are both plant-based new environmentally friendly paints. In general, wood oil or wood wax oil is used to protect and decorate wood. The oil in wood (wax) oil can penetrate into the wood and give the wood deep moisturizing and maintenance; Wax can be tightly combined with wood fibers, enhance surface hardness, waterproof and stain-proof, wear-resistant and rub-resistant, such a combination provides the most excellent maintenance and decoration effect for wood.

Care matters

1. Solid wood furniture: often use a soft cloth along the texture of the wood surface to dust the furniture, before dusting, you should dip some water on the soft cloth, do not feel the moisture, do not use chemicals, so as not to damage the paint surface.

Wooden furniture is a natural material that is more vulnerable to damage, so collision and impact should be avoided when using, and it should be avoided to drag or grind the surface of documents or any items on the surface of the wooden products, as well as to place heavy objects for a long time to avoid abrasion marks or indentations;

2. When solid wood furniture is used in a drier environment, artificial humidification measures are required. For example, regularly wipe furniture with a soft cloth dipped in water or use an indoor humidifier;

3. Wax regularly, every 6-12 months, use paste wax to apply a layer of wax to the furniture. Before waxing, the old wax should be wiped off with mild, non-alkaline soapy water;

The most common maintenance oil for wooden furniture is walnut oil.

This walnut oil is a dry oil, which is a natural and environmentally friendly oil without chemical ingredients. Walnut oil is used for the maintenance of solid wood furniture, which will form a protective film on the surface of the furniture after drying, which reduces the invasion of humid air and effectively prevents dry cracking.

The correct choice of walnut oil is very important, the first thing to do is to identify the color first, the better walnut oil is generally pure and transparent in color, and there are no impurities in it. Walnut oil is divided into cold-pressed and hot-pressed, and cold-pressed walnut oil is relatively pure and has no peculiar smell.

The most commonly used for the maintenance of wooden furniture is walnut oil, which is a dry oil with a light fragrance, and is a natural environmentally friendly oil without chemical components. Walnut oil is used to wipe wooden furniture, and after drying, it will form a protective film on the surface of the furniture, which can effectively avoid the invasion of humid air and prevent dry cracking.

The specific operation method of using walnut oil to wipe wooden furniture is as follows:

Step 1: Clean the surface of the furniture from dirt.

Step 2: When wiping walnut oil, first drop a little walnut oil onto the cotton silk and rub it evenly, and wipe it along the texture of the solid wood furniture.

Step 3: After wiping walnut oil once, wipe it again every hour or so for better results.

Step 4: Wait for the walnut oil to dry and then dry it with a clean, dry cotton cloth.

In addition to walnut oil, there are orange oil, olive oil, tung oil and so on.

Tips for removing grease stains from wooden furniture.

Cooking oil can be used to wipe furniture.

Different furniture uses different methods.

Solid wood furniture is generally wiped with oil, orange oil, walnut oil, olive oil, tung oil, etc., it is best to use walnut oil, the effect is better!

If your home is unpainted solid wood furniture, you need to play wood wax oil for maintenance, the maintenance of unpainted solid wood furniture is professional wood maintenance, the general use of maintenance products are: orange oil, olive oil, tung oil and high-grade wood wax, and the maintenance cycle is usually one or several years.

Tung oil, strong adhesion, high hardness, strong moisture-proof, pure natural, disadvantages: slow drying for several days, toxic when not dry, non-toxic when drying, must be dried in a ventilated place.

Cooked tung oil, strong adhesion, high hardness, strong moisture-proof, fast drying Disadvantage contains chemical components, dry non-toxic, must be dried in a ventilated place.

Cooked flax oil, non-toxic and natural, can be used for wooden tableware maintenance Disadvantages: Adhesion, hardness, and moisture-proof power are not as good as tung oil, and it dries slowly.

Walnut oil, all kinds of effects are average, expensive and cost-effective, not recommended.

Olive oil, nothing to use, salad to eat well

The above is about the maintenance of wooden furniture that has not been painted, if you have varnish (raw tung oil, cooked tung oil, transparent paint), then spray some furniture wax.

Common methods of wood oil construction: wiping, brushing, spraying.

Regardless of the construction method, it is necessary to sand the wood clean, clean the surface dust, and apply it thinly during construction, and completely dry it between each pass.

Rubbing: Dip an appropriate amount of wood oil with a cotton cloth, and rub it thinly along the wood grain, which is a more fuel-efficient method, suitable for novice friends and when the area is not large.

Brushing: Use a brown brush to dip wood oil, thin brushing, relatively more used construction methods, decent.

Spraying: professional spraying tools are needed, if you have high hand feel requirements and a large area, you can choose to spray this method, which requires a certain amount of experience, and novice friends can use the two methods of wiping and brushing.

These three methods can also be combined.

1. Wipe with a cotton cloth, wipe an appropriate amount of Cherexi wood wax oil, evenly brush the wood wax oil along the direction of the wood texture, leave no dead ends, brush the wood wax oil thinly and evenly, and polish it after placing it to dry, and brush the wood wax oil for the second time in the same way. Cotton cloth wiping is generally suitable for wood with a small construction area.

2. Brush brush: polish smooth and flat wood, dip an appropriate amount of Cheresi wood wax oil and paint evenly along the direction of the wood grain, after 5-10 minutes, use a cotton cloth or rag that does not lose hair to collect excess oil, mainly to wipe evenly, avoid color difference and waste, and paint the second time after drying. During the brushing process, it is easy to have brush marks; Spraying will be oil-intensive but the surface will be smooth.

3. Scraper scraping: If it is a large area of flat and no concave and convex wood, you can quickly scrape it evenly with a scraper after pouring out an appropriate amount of Cheresi wood wax oil, and wipe the uneven place evenly with a cotton cloth or brush, and brush it for the second time after the surface is dry.

4. Spraying: The spraying effect is easy to be thick and bright, the concentration of Cheresi wood wax oil is large, the solid content is relatively high, it is inconvenient to spray, and spraying is the most likely to cause waste and increase the cost of wood wax oil; If it is a construction requirement, it can be diluted with a special diluent for Cheresisi. It is generally recommended to spray Cheresi wood wax oil and water-based paint, which will produce a smoother effect, but it will be more oil-intensive.

How to use wood wax oil - substrate treatment.

White billet requirements: the moisture content of the wood does not exceed 20% (note: the moisture content of the general substrate is 8-12%)

Generally, the production uses 600 to 1000 mesh sandpaper to polish the wood to smooth and flat, and the number of sandpaper can be appropriately increased for high-quality furniture

Make the surface before painting clean, dry, free of grease and dust (Note: during outdoor construction, if there is dust on the surface after painting, wipe it with a cotton cloth after it is dry).

How to use wood wax oil - operating instructions.

Stirring: Stir well after opening the can until even. Brushing:

Use cotton cloth, hard brush, roller and other tools to evenly paint the wood wax oil along the direction of the wood grain, after slightly drying, if there is uneven wood wax oil on the surface, wipe off with a clean cotton cloth to make the surface of the coated wood smooth. The surface of the wood is painted in place, leaving no dead corners. If you need gloss, the white blank is polished as fine and smooth as possible, and after the brushing is completed, it is polished with cotton cloth or polishing wheel, which can achieve 3-5 spectroscopic effect.

How to use wood wax oil - construction method.

Apply directly, no primer, no dilution, stir evenly, and brush once or twice. Drying time: the surface of the brush is well ventilated, the surface is dry for 2-6 hours, and the surface is dry for 12-24 hours (Note:

3-7 days of actual use). Maintenance: Clean the old wood surface until it is dry and free of grease and dust, and repaint it to renovate

If wood wax oil was used on the surface of the wood before, you only need to clean the dust on the surface of the wood and brush it directly; If the surface of the wood was previously painted with traditional paint, the old wood surface should be restored to the new wood surface with a refurbishment agent or sanding, and then the construction should be carried out according to the above steps.

How to use wood wax oil - precautions.

Wood wax oil should not be mixed with other paints or coatings: pre-treatment, polish the surface to smooth, clean and dust-free: pay attention to product storage:

Store in a clean, dry, airtight container; The product storage place should be kept ventilated and dry, protected from sun and rain, and isolated from fire and heat; Valid for 5 years.