Lifting with 50 tons?How many tons can be done at most?

50t many manufacturers have, 1000t have, like this tonnage sling needs to consider a rope straight warp problem, to see if it is suitable.

You can check out Juli's **, I learned about 1200 tons.

The lifting capacity of 50 tons truck crane is about 50 tons. It could be a little lower than 50 tons, or a little more than 50 tons higher. Not all cranes of a certain tonnage are the same.

Rather, different manufacturers come out with different products.

Crane is the common name of crane, crane is a kind of lifting machinery, is a kind of cyclic and intermittent movement of machinery.

A working cycle comprises: the retrieval device lifts the item from the fetch place, then moves horizontally to the designated place to lower the item, and then performs a reverse motion to return the fetch device to its original position for the next cycle. Such as fixed slewing cranes, tower cranes, truck cranes, tires, crawler cranes, etc.

Multi-action lifting machinery that lifts vertically and carries heavy loads horizontally within a certain range. Also known as a crane. It belongs to material handling machinery. The working characteristics of the crane are intermittent movements, that is, the corresponding mechanisms for reclaiming, moving, unloading and other actions in a working cycle work alternately.

The 50-ton crane refers to the maximum that can lift 50 tons, that is, it can lift 50 tons without the boom stretching out, and the weight of the crane is related to the following aspects:

1. The length of the boom telescopic, the longer the boom is extended, the smaller the lifting capacity;

2. Luffing, the larger the angle of luffing, that is to say, the higher the lifting height of the boom, the greater the lifting capacity

3. The angle of lifting, the larger the angle, the greater the lifting capacity.

It can lift up to 50 tons.

50 tons of crane refers to 50 tons for the rated lifting capacity of the crane. The rated lifting capacity is the sum of the materials that the crane can lift together with the divisible spreaders or attachments (such as grabs, electromagnetic chucks, balance beams, etc.).

The common sense of the crane is as follows:

1. The lifting capacity marked on the crane sign usually refers to the rated lifting capacity of the crane, which should be conspicuously displayed in the obvious position of the crane structure.

2. For the boom type crane, its rated lifting capacity changes with the amplitude, and its lifting characteristics are characterized by the lifting moment. The value indicated on the signage is the maximum lifting capacity.

3. For cranes with separable spreaders (such as grabs, electromagnetic chucks, balance beams, etc.), the total service of the spreader and material quality is rated lifting capacity, and the quality of the lifting materials is allowed to be effectively lifted.

A 50-ton crane means that it can lift up to 50 tons, that is, it can lift 50 tons without the boom extending.

The weight of crane lifting is related to the following aspects:

1. The length of the boom telescopic, the longer the boom is extended, the smaller the lifting capacity;

2. Luffing, the larger the angle of luffing, that is to say, the higher the lifting height of the boom, the greater the lifting capacity

3. The angle of lifting, the larger the angle, the greater the lifting capacity.

The crane structure mainly includes:Lifting mechanism, running mechanism, luffing mechanism, slewing mechanism and metal structure, etc. The hoisting mechanism is the basic working mechanism of the crane, which is mostly composed of a hanging system and a winch, and there are also heavy objects that are lifted through the hydraulic system. The running mechanism is used to move heavy objects horizontally or adjust the working position of the crane, which is generally composed of an electric motor, a reducer, a brake and a wheel.

The luffing mechanism is only equipped on the boom type crane, and the amplitude decreases when the boom is raised, and the amplitude increases when it is lowered down, and it is divided into two kinds of balanced luffing and unbalanced luffing. The slewing mechanism is used to make the boom rotate, and is composed of a driving device and a slewing support device.

It depends on the position of the crane station, as well as the height of the object to be lifted.

How is it possible to arrange to lift something more than 50 tons with a 50-ton crane? Unless you don't think about safety. The case of not leaving the arm is 50 tons, and the lifting capacity of each arm will be reduced by one grade.

Cranes of different manufacturers have different configurations and different performance, so you can refer to the lifting performance table.

In general, it can be lifted from 0 to 50 tons; Special cases can also be lifted up to 55 tons.

Didn't get to the point, what was asked was the self-weight of the crane when it was empty?

50 ton crane ten meters crane 20 tons line.

Fifty tons of crane, radius forty-two meters, how much to lift.

The 50-ton crane refers to the maximum that can lift 50 tons, that is, it can lift 50 tons without the boom stretching out, and the weight of the crane is related to the following aspects:

The length of the boom telescopic, the longer the boom is extended, the smaller the lifting capacity;

luffing, the greater the angle of luffing, that is to say, the higher the lifting height of the boom, the greater the lifting capacity;

The angle of lifting, the larger the angle, the greater the lifting capacity.

Summary. Pro, the general 50-ton crane weighs about 44 tons, which is almost this weight.

Pro, the general 50-ton crane weighs about 44 tons, which is almost this weight.

He is a 90-year-old car imported from Japan. Crawler crane of fifty tons.

Is this only more than 40 tons. You mean you can't have more than 50 tons.

Dear, the first time I saw this, I feel that this should be more than 50 tons, and it is imported and tracked.

And in the 90s, the material was relatively solid, it should have exceeded 50 tons, and now it is almost more than 40 tons.

My brother. Can you find this on the Internet? I bought it as scrap metal. I don't know how much it is, I don't dare to buy it. A few tons of cargo is missing. That's more than 10,000. That would be a loss.

Dear, I'll try to see if I can find him, the specific tonnage, but I can only try.

Dear, I found out, they said that this machine weighs 57 tons.

Is it the same as mine?

Pro, basically the same, also imported from Japan, 50 tons, crawler crane, self-weight 57 tons, is compliant. Dear, this is the rhythm of making a fortune!

About 2 tons, 5 tons of sling folded in half can theoretically lift ten tons, but not more than seven tons is appropriate.

Lifting with hoisting is a kind of straps made of synthetic fibers for lifting. Synthetic fiber slings are divided into flat slings and round slings according to types. Flat slings are mainly made of nylon fibers (polyamide synthetic fibers), polyester fibers (polyester synthetic fibers), and polypropylene fibers (polypropylene synthetic fibers).

They have their own characteristics and can be used in different environments, but slings made of different materials should never be mixed.

Precautions. 1. When the hoisting object has a sharp edge, the sharp edge will bring destructive cuts to the sling, in order to protect the hoisting shelter belt from cuts, a protective lining can be placed between the sling and the hoisted object.

2. Exposure to continuous ultraviolet light will destroy the strength of the synthetic fiber sling; It is recommended to use the following methods to avoid the influence of ultraviolet light or electrobulk arc welding light: when not in use, store the sling in a ventilated, cool and dry place; Check the sling once or more times a week depending on the sling usage.

The 50-ton crane crane crane is 15 tons, and the farthest can lift Sun Wang 10 meters away. Because of the truck crane.

The theoretical tonnage is multiplied by 3, and then divided by the weight to be hoisted to obtain the longest distance, so the calculation formula for the 50-ton crane crane 15 tons can be lifted 10 meters to the stool is as follows: 50 times 3 is equal to 150, 150 divided by Zao Kai Chong 15 is equal to 10 meters, so 10 meters is the farthest distance when the 50-ton crane crane is 15 tons.